1. Product Overview
The GDI GT981 'Do Not Roll Down' Sticker is designed for use on vehicle window switches following window film installations. Each roll contains 1000 individual stickers, featuring a low-tack adhesive for temporary application. The primary purpose of these stickers is to clearly communicate to vehicle occupants that windows should not be rolled down or washed for a period of 3-5 days, allowing the window film to properly cure and adhere.
This image displays a roll of bright green GDI GT981 stickers. Each sticker prominently features the black text 'DO NOT ROLL DOWN' followed by 'OR WASH WINDOWS FOR 3-5 DAYS...THANK YOU'. The roll contains 1000 individual stickers, designed for temporary application on vehicle window switches after film installation.
2. Usage Guidelines
2.1 Preparation
Ensure the surface where the sticker will be applied (typically the window switch or surrounding panel) is clean and dry. Remove any dust, grease, or moisture to ensure optimal adhesion of the low-tack adhesive.
2.2 Application Instructions
- Carefully peel one 'Do Not Roll Down' sticker from the roll.
- Position the sticker clearly on or near the window control switch for the newly tinted window. Ensure the text is easily readable by anyone operating the window.
- Gently press the sticker onto the surface, smoothing out any air bubbles to ensure full contact. The low-tack adhesive allows for easy repositioning if needed.
- The sticker serves as a reminder that the window should not be rolled down or washed for 3-5 days to allow the window film to cure properly.
3. Care and Removal
3.1 Ensuring Effectiveness
Once applied, periodically check that the sticker remains securely in place and that the message is clearly visible. If the sticker becomes dislodged or damaged, replace it with a new one from the roll to maintain the warning.
3.2 Removal
After the recommended 3-5 day curing period, or when the warning is no longer necessary, the sticker can be easily peeled off the surface. The low-tack adhesive is designed to leave minimal to no residue upon removal.
4. Specifications
| Attribute | Detail |
|---|---|
| Brand | GDI |
| Model Number | GT981 |
| Number of Pieces | 1000 |
| Unit Count | 1000.0 Count |
| Item Weight | 9 pounds |
| Package Dimensions | 9 x 5 x 3 inches |
| Reusability | Single Use |
| Adhesive Type | Low-tack |
5. Troubleshooting
5.1 Sticker Not Adhering Properly
If the sticker does not adhere well, ensure the application surface is thoroughly clean and dry. Residue from cleaning agents, dust, or moisture can prevent proper adhesion. Re-clean the surface and apply a new sticker.
5.2 Message Not Clearly Visible
If the 'Do Not Roll Down' message is obscured or difficult to read, reposition the sticker to a more prominent location on or near the window switch. Ensure no part of the sticker is folded or creased.
6. Warranty Information
GDI stands by the quality of its products. While these stickers are designed for single use, they are manufactured to meet high standards for effectiveness and ease of use. For any concerns regarding product defects or quality, please refer to the support section.
7. Support
For further assistance or inquiries regarding the GDI GT981 'Do Not Roll Down' Stickers, please contact GDI customer support through their official website or the retailer from whom the product was purchased. Please have your product model number (GT981) available when contacting support.