Introduction
This manual provides instructions for the AIDITIYMI XRT112 replacement remote control, designed for various VIZIO Smart LED TVs. This remote offers direct functionality without the need for complex programming or pairing. Please read this manual thoroughly to ensure proper use and longevity of your remote control.
Setup
The AIDITIYMI XRT112 remote control is designed for immediate use with compatible VIZIO Smart LED TVs. No programming or pairing is required.
Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards and remove it.
- Insert two (2) new AAA alkaline batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery compartment cover by sliding it back into place until it clicks securely.
Figure 1: Battery compartment with AAA batteries inserted.
Once batteries are installed, the remote is ready for use with your compatible VIZIO TV.
Operating Instructions
Familiarize yourself with the buttons on your AIDITIYMI XRT112 remote control for optimal operation of your VIZIO Smart LED TV.
Figure 2: Front view of the AIDITIYMI XRT112 remote control.
Key Functions:
- Power Button (●): Turns the TV on or off.
- Input: Cycles through available input sources (HDMI 1, HDMI 2, AV, etc.).
- Netflix, Amazon, iHeartRadio: Dedicated buttons for quick access to these streaming applications.
- Volume Up/Down (VOL +/-): Adjusts the TV's audio volume.
- Channel Up/Down (CH +/-): Changes the TV channel.
- Mute (🔇): Mutes or unmutes the TV audio.
- Navigation Pad (Up, Down, Left, Right, OK): Used to navigate menus and select options.
- Back: Returns to the previous menu or screen.
- Menu: Opens the TV's main menu.
- Exit: Closes the current menu or application.
- Info: Displays information about the current program or input.
- Guide: Accesses the electronic program guide (if available).
- Number Pad (0-9): Directly enters channel numbers.
- Colored Buttons (Red, Green, Yellow, Blue): Functionality varies depending on the TV menu or application.
Maintenance
Proper care will extend the life of your remote control.
- Cleaning: Use a soft, dry cloth to clean the remote's surface. Do not use liquid cleaners or abrasive materials.
- Battery Replacement: Replace batteries when the remote's performance degrades or stops working. Always replace both batteries simultaneously with new AAA alkaline batteries. Do not mix old and new batteries, or different types of batteries.
- Storage: If the remote will not be used for an extended period, remove the batteries to prevent leakage and potential damage.
- Environment: Avoid exposing the remote to extreme temperatures, direct sunlight, moisture, or dust.
Troubleshooting
If you encounter issues with your remote control, refer to the following common solutions:
- Remote Not Responding:
- Ensure batteries are inserted correctly with the correct polarity (+/-).
- Replace old batteries with two new AAA alkaline batteries.
- Check for any obstructions between the remote and the TV's infrared sensor.
- Confirm the remote is pointed directly at the TV's sensor.
- Specific Buttons Not Working:
- This remote is a direct replacement and does not require programming. If a button is not working, ensure it is a function supported by your specific VIZIO TV model.
- Clean the remote's surface, especially around the non-functional button, to remove any debris.
- TV Not Responding to Remote:
- Verify that your TV model is listed as compatible with the XRT112 remote.
- Try restarting your TV by unplugging it from the power outlet for a few minutes, then plugging it back in.
If issues persist after following these steps, please refer to the support information.
Specifications
| Model Number | XRT112 (ADASNTQW-XRT112-iht122) |
| Brand | AIDITIYMI |
| Compatible Devices | Various VIZIO Smart LED Televisions (e.g., D500I-B1, D650I, E700I-B3, E24-C1, E28H-C1, E320I-B2, E390IB0, E400I-B2, E420I-B0, E480I-B2, E500D-A0, etc.) |
| Power Source | 2 x AAA Batteries (not included) |
| Product Dimensions | 6 x 2 x 0.6 inches (15.24 x 5.08 x 1.52 cm) |
| Item Weight | 1.6 ounces (45.36 grams) |
| Color | Black |
| Special Feature | Ergonomic design |
Warranty and Support
This product is a replacement remote control. Specific warranty information is typically provided by the seller at the time of purchase. Please refer to your purchase documentation or contact the seller directly for details regarding warranty coverage and customer support.
For further assistance or inquiries, please contact the retailer or manufacturer where the product was purchased.