1. Product Overview
The CRC Marine Premium Dielectric Grease is a unique, non-curing compound designed for sealing, protecting, and electrically insulating various components. This product improves electrical performance by reducing arcing and voltage drop, especially in adverse weather conditions. It is also suitable for lubricating plastic and rubber parts. The pressurized can features a patented Select-A-BEAD Nozzle for controlled and continuous application.
Image 1.1: CRC Marine Premium Dielectric Grease product can.
2. Safety Information
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 Warning).
Always read and understand the Safety Data Sheet (SDS) before use. Use in a well-ventilated area. Avoid contact with eyes and skin. Wear appropriate personal protective equipment (PPE) such as gloves and eye protection. Keep out of reach of children. Do not ingest. If swallowed, seek immediate medical attention. Store in a cool, dry place away from direct sunlight and heat sources. Dispose of contents and container in accordance with local, regional, national, and international regulations.
3. Product Features
- Non-Curing Compound: Maintains consistency and does not harden over time.
- Sealing and Protection: Forms a protective barrier against moisture, corrosion, and contaminants.
- Electrical Insulation: Improves electrical performance by preventing arcing and voltage drop.
- Lubrication: Effective for lubricating plastic and rubber components.
- Select-A-BEAD Nozzle: Patented finger-actuated delivery system allows selection of bead width for precise application.
- Temperature Range: Effective up to 400 degrees Fahrenheit.
Image 3.1: Detail of the Select-A-BEAD Nozzle for controlled application.
4. Setup and Preparation
- Read Instructions: Carefully read all instructions and safety warnings before use.
- Ventilation: Ensure the work area is well-ventilated.
- Surface Preparation: For best results, ensure surfaces to be treated are clean, dry, and free from dirt, oil, or old grease. Use an appropriate cleaner if necessary, and allow to dry completely.
- Shake Can: Shake the can well before use to ensure proper mixing of contents.
- Select Nozzle Setting: Turn the dial on the Select-A-BEAD Nozzle to choose the desired bead width for your application.
5. Operating Instructions (Application)
Follow these steps for effective application of CRC Marine Premium Dielectric Grease:
- Aim and Apply: Hold the can upright and aim the nozzle at the component requiring treatment.
- Dispense Grease: Press the actuator to dispense a continuous, even bead of grease.
- Electrical Connections: For electrical connections, apply a thin, even layer to both mating surfaces of connectors, terminals, or spark plug boots. This helps prevent moisture ingress and corrosion, improving conductivity.
- Lubrication: For plastic and rubber parts, apply a sufficient amount to cover the surfaces requiring lubrication.
- Avoid Over-Application: While dielectric grease is non-conductive, excessive application on electrical contacts can sometimes impede mechanical connection. Apply a thin, protective film.
- Wipe Excess: Wipe away any excess grease with a clean cloth.
Image 5.1: Illustrative application of dielectric grease to an electrical component.
6. Maintenance and Storage
- Storage: Store the can in a cool, dry place, away from direct sunlight and temperatures exceeding 120°F (49°C).
- Cap Replacement: Ensure the cap is securely replaced after each use to prevent contamination and maintain product integrity.
- Cleanup: For accidental spills or excess product, use a clean cloth. For stubborn residue, a general-purpose cleaner may be used, followed by wiping dry.
7. Troubleshooting
- Nozzle Clogging: If the nozzle becomes clogged, remove it and clean with a suitable solvent. Ensure the nozzle is dry before reattaching.
- Uneven Application: Adjust the Select-A-BEAD Nozzle setting or ensure consistent pressure during application. Ensure the surface is clean and dry.
- Poor Electrical Performance: Verify that the electrical connection is properly made and that the grease was applied as a thin film. Excessive grease can sometimes interfere with mechanical contact. Re-clean and reapply if necessary.
8. Specifications
| Attribute | Value |
|---|---|
| Brand | CRC |
| Model Name | 6113 |
| Item Form | Grease |
| Liquid Volume | 3.3 Fluid Ounces (94 Grams) |
| Item Weight | 0.4 Pounds |
| Material | Plastic, Rubber (referring to components it can lubricate/protect) |
| Package Information | Pressurized Can |
| Recommended Uses | Marine, Electrical |
| Upper Temperature Rating | 400 Degrees Fahrenheit |
| UPC | 078254061139 |
9. Warranty Information
This product is covered by a Manufacturer Warranty. For specific details regarding the warranty period, coverage, and claims process, please refer to the official CRC website or contact CRC customer support directly. Keep your purchase receipt as proof of purchase.
10. Support and Contact
For further assistance, technical questions, or to report an issue, please contact CRC Industries. You can typically find contact information, including phone numbers and email addresses, on the official CRC website:
Visit CRC Industries Official Website
Please have the product model number (6113) and batch code (if available on the can) ready when contacting support.
11. Official Product Videos
No official product videos from the seller were found for this item in the provided data.