1. Introduction
Thank you for choosing the mirrea 48-inch Modern LED Vanity Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.
This modern LED vanity light (Model J1200-46W) features a sleek chromed finish, 5000K cold white illumination, and dimmable functionality. Its adjustable design allows for customized light direction, making it an ideal solution for various bathroom lighting needs.
Figure 1: Front view of the mirrea 48-inch Modern LED Vanity Light.
2. Safety Information
- WARNING: To avoid electric shock, always disconnect power at the circuit breaker or fuse box before installation or servicing.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Use only copper supply conductors.
- This fixture is designed for indoor use only. Do not expose to water or moisture.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create safety hazards.
- Wear appropriate safety gear, including gloves and eye protection, during installation.
- Ensure the mounting surface can support the weight of the fixture.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact customer support.
- mirrea 48-inch Modern LED Vanity Light Fixture
- Mounting Hardware (screws, wire nuts, mounting plate)
- Instruction Manual (this document)
4. Specifications
| Brand | mirrea |
| Model Number | J1200-46W |
| Product Dimensions | 47.24"L x 4.33"W x 4.72"H (120cm L x 11cm W x 12cm H) |
| Wattage | 46 Watts |
| Brightness | 3680 Lumens |
| Color Temperature | 5000K Cold White |
| Material | Acrylic, Alloy Steel |
| Finish Type | Chromed |
| Voltage | 120 Volts |
| Dimmable | Yes (with compatible TRIAC dimmer) |
| Light Source Type | Integrated LED |
| Average Life | 50,000 Hours |
| Installation Type | Flush Mount, Wall Mount |
| Room Type | Bathroom |
| Certifications | ETL, FCC, cETL Listed |
Figure 2: Product dimensions for the mirrea LED vanity light.
5. Setup (Installation)
Professional installation is recommended. Ensure you have all necessary tools (screwdriver, wire strippers, electrical tape, etc.) before starting.
- Prepare for Installation: Turn off power at the circuit breaker or fuse box to avoid electrical shock. Ensure the power is completely off before proceeding.
- Install Mounting Plate: Attach the provided mounting plate to the electrical junction box in the wall. The plate typically has a lip with screw holes at the top and bottom. Secure it firmly to the wall studs or with appropriate anchors.
- Wire Connections: Connect the fixture's wires to the corresponding household wires using the provided wire nuts. Match black to black (Live), white to white (Neutral), and green or bare copper to green or bare copper (Ground). Ensure all connections are secure.
- Attach Fixture: Carefully align the fixture with the mounting plate and secure it using the screws provided. Ensure the fixture is flush against the wall and stable.
- Restore Power: Once the fixture is securely installed and all connections are checked, restore power at the circuit breaker.
Figure 3: Detail of the mounting bracket and wiring area.
Figure 4: Example installation above a bathroom vanity.
6. Operating Instructions
- Turning On/Off: Operate the light using a standard wall switch connected to the fixture's power supply.
- Dimming Functionality: This fixture is dimmable and compatible with most standard TRIAC dimmer switches. For optimal performance and to avoid flickering, ensure you use a dimmer switch designed for LED lighting. Adjust the dimmer to achieve your desired brightness level.
- Adjusting Light Direction: The light bar features a swivel mechanism, allowing you to adjust the direction of the light output. Gently rotate the light bar to direct illumination upwards, downwards, or at an angle to suit your preference.
Figure 5: Close-up of the light bar's swivel mechanism.
Figure 6: Examples of adjustable light direction.
7. Maintenance
- Cleaning: To clean the fixture, ensure power is off. Use a soft, dry, or slightly damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or acrylic diffuser.
- LED Lifespan: The integrated LED light source has an average lifespan of 50,000 hours and does not require bulb replacement.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture; Loose wiring connection; Faulty wall switch | Check circuit breaker/fuse; Verify all wire connections are secure; Test or replace wall switch. |
| Light flickers or dims inconsistently | Incompatible dimmer switch; Loose wiring connection | Ensure a TRIAC dimmer switch compatible with LED lighting is used; Check wiring connections. |
| Reduced brightness | Dimmer setting too low; Power issue | Adjust dimmer to a higher setting; Check power supply. |
9. Warranty and Support
This mirrea LED Vanity Light is covered by a 2-year warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact the seller or mirrea customer service through your purchase platform. Please have your order number and product model (J1200-46W) available when contacting support.