1. Introduction
Thank you for choosing the Kobe Brillia ISX2136SQB-2 Island Range Hood. This appliance is designed to provide efficient ventilation for your cooking area, removing smoke, grease, and odors. Crafted from durable 20-gauge commercial-grade stainless steel with a seamless design, it offers both performance and aesthetic appeal. Please read this manual thoroughly before installation and operation to ensure proper use and maintenance.
Image 1.1: Front view of the Kobe Brillia ISX2136SQB-2 Island Range Hood.
Key Features:
- Durable 20-gauge commercial grade stainless steel with seamless design and satin finish.
- 680 CFM at maximum power for effective ventilation.
- 3-speed mechanical push button controls with QuietMode, low, and high settings.
- Bright 3W (x4) LED lights to illuminate the cooktop.
- Dishwasher-safe baffle filters for easy cleaning.
- Adjustable duct cover to fit various ceiling heights (8' to 9.5').
Image 1.2: Diagram illustrating the key features of the range hood, including its adjustable duct cover, stainless steel construction, thin body, baffle filters, 3-speed control, and LED lighting.
2. Safety Information
Please observe the following safety precautions to reduce the risk of fire, electric shock, or injury.
- Always disconnect power before servicing or cleaning the unit.
- Installation must be performed by a qualified technician in accordance with all local codes and standards.
- Ensure proper grounding.
- Do not operate the range hood if the power cord is damaged.
- Maintain adequate ventilation in the room when the range hood is used simultaneously with gas or other fuel-burning appliances.
- Clean grease filters regularly to prevent grease fires.
- Never leave surface cooking unattended at high heat settings.
3. Package Contents
Verify that all components are present before beginning installation:
- Kobe Brillia ISX2136SQB-2 Island Range Hood unit
- Baffle filters
- Installation screws
- Duct cover (adjustable)
- Instruction Manual (this document)
4. Installation Instructions
This section outlines the general steps for installing your island range hood. Professional installation is recommended.
4.1 Planning and Preparation
- Ensure the ceiling structure can support the weight of the range hood.
- Verify that the ceiling height is between 8' and 9.5' for proper duct cover fit.
- Plan for a 6-inch round ducting system for exhaust.
- Ensure electrical supply (120 Volts) is available at the installation point.
4.2 Dimensions and Clearance
Refer to the diagrams below for precise measurements and recommended clearances.
Image 4.1: Diagram detailing the overall dimensions and technical specifications, including the adjustable height range for ceilings from 8' to 9'6".
Image 4.2: Detailed technical drawing providing precise measurements in inches and millimeters for installation planning.
4.3 Mounting and Ducting
- Secure the mounting bracket to the ceiling joists, ensuring it is level and centered over the cooking area.
- Attach the range hood body to the mounting bracket.
- Connect the 6-inch round ductwork from the range hood exhaust to your home's ventilation system. Ensure all connections are sealed to prevent air leaks.
- Install the adjustable duct cover, sliding it into place to conceal the ductwork and mounting hardware.
4.4 Electrical Connection
- Ensure power is OFF at the circuit breaker.
- Connect the range hood's electrical wiring to a grounded 120V AC power supply, following local electrical codes.
- Secure all electrical connections within the junction box.
- Restore power and test the unit.
5. Operating Instructions
The Kobe Brillia ISX2136SQB-2 features intuitive mechanical push-button controls for fan speed and lighting.
Image 5.1: Underside view of the range hood, illustrating the baffle filters and integrated LED lights.
5.1 Fan Operation
The control panel includes buttons for OFF, QuietMode (Q), Low (L), and High (H) fan speeds.
- OFF: Press to turn off the fan.
- QuietMode (Q): Activates the fan at its lowest, quietest setting, ideal for light cooking or maintaining air circulation.
- Low (L): Provides moderate ventilation for everyday cooking.
- High (H): Engages maximum suction power (680 CFM) for heavy cooking, frying, or grilling.
5.2 Lighting
The range hood is equipped with four 3W LED lights to illuminate your cooktop.
- Press the light button (often indicated by a light bulb icon) to turn the LED lights ON or OFF.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your range hood.
6.1 Cleaning Baffle Filters
The baffle filters are designed to trap grease and should be cleaned regularly, depending on cooking frequency.
- Turn off the range hood and disconnect power.
- Remove the baffle filters by sliding them out of their slots.
- Clean the filters in a dishwasher or by hand using hot water and a mild detergent.
- Allow filters to dry completely before reinstalling.
- Reinstall the baffle filters securely.
6.2 Exterior Cleaning
Clean the stainless steel exterior with a soft cloth and a non-abrasive stainless steel cleaner. Avoid harsh chemicals or abrasive pads that can scratch the finish.
6.3 LED Light Replacement
LED lights are long-lasting and generally do not require frequent replacement. If a light fails, contact customer support for replacement instructions or qualified service.
7. Troubleshooting
If you encounter issues with your range hood, refer to the following common problems and solutions:
- Range Hood Does Not Operate:
- Check if the power cord is securely plugged in.
- Verify that the circuit breaker is not tripped.
- Ensure the control buttons are pressed correctly.
- Poor Airflow:
- Clean the baffle filters; clogged filters restrict airflow.
- Check for obstructions in the ductwork.
- Ensure ductwork is properly sealed and not leaking air.
- Excessive Noise:
- Ensure the range hood is securely mounted and all screws are tightened.
- Check for loose parts or debris in the blower.
- Verify that ductwork is properly installed and not vibrating.
- Lights Not Working:
- Check if the light button is pressed.
- If individual LEDs are out, they may require replacement by a qualified technician.
For issues not covered here, please contact Kobe customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | ISX2136SQB-2 |
| Brand | Kobe |
| Vent Hood Design | Island Canopy Hood |
| Material | 20-gauge Commercial Grade Stainless Steel |
| Finish | Satin Stainless-Steel |
| Air Flow Capacity | 680 CFM (Cubic Feet Per Minute) |
| Number of Speeds | 3 (QuietMode, Low, High) |
| Controls Type | Mechanical Push Button |
| Light Source Type | LED (4 x 3W) |
| Filter Type | Baffle (Dishwasher-safe) |
| Ventilation Type | Exhaust |
| Exhaust Outlet | Top 6-inch Round |
| Voltage | 120 Volts |
| Noise Level | 1.0 Sone (on QuietMode) |
| Product Dimensions (W x D x H) | 90.81 x 60.01 x 107 cm (35.75" x 23.62" x 42.13") |
| Adjustable Height | Fits Ceiling Height 8' - 9.5' |
| Item Weight | 454 g (approx. 1 lb) Note: This weight appears to be a data entry error and is likely significantly higher. |
9. Warranty and Customer Support
For warranty information, product registration, or technical assistance, please refer to the warranty card included with your product or visit the official Kobe website. Keep your proof of purchase for warranty claims.
Kobe Customer Support: Please visit www.koberangehoods.com for contact information and further support resources.