Intellinet Network Solutions 2-Port High-Power PoE+ Extender Repeater (Model 561266)

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Intellinet Network Solutions 2-Port High-Power PoE+ Extender Repeater, Model 561266. This device is designed to extend the reach of your Power over Ethernet (PoE) network, allowing you to deploy PoE-powered devices beyond the standard 100-meter Ethernet cable limit.

1.1. Package Contents

• Intellinet Network Solutions 2-Port High-Power PoE+ Extender Repeater (Model 561266)
• Installation manual (this document)

2. Product Overview

The Intellinet 2-Port High-Power PoE+ Extender Repeater is a compact, fanless device that extends both data and power to PoE-compatible devices. It supports Gigabit Ethernet speeds and delivers up to 25W per port, making it suitable for various network applications.

Figure 2.1: Front view of the Intellinet 2-Port High-Power PoE+ Extender Repeater.

2.1. Key Features

• Cost-Effective Installation: Utilizes existing network cables for both data and power, reducing installation costs.
• Dual PoE+ Outputs: Powers two devices simultaneously from a single PoE injector port, delivering up to 25W to each output port.
• Extended Range: Adds an extra 100 meters (328 ft.) to your existing PoE network, for a total range of up to 200 meters (656 ft.) when used in series.
• Full Gigabit Speeds: Supports 10/100/1000 Mbps data rates with auto-MDIX.
• Compact Fanless Metal Case: Ensures silent operation and provides a rugged enclosure for durability.
• PoE-Aware Auto-Detection: Protects non-PoE devices from potential damage by automatically detecting PoE compatibility.
• Tool-Free Setup: Plug-and-play functionality with no external power supply required.

Figure 2.2: Close-up view of the PoE IN and PoE OUT ports on the extender.

Figure 2.3: Illustration of the extended range capability, adding 100 meters per extender.

3. Setup and Installation

The Intellinet PoE+ Extender is designed for simple, tool-free installation. No external power adapter is required as the unit is powered directly by the incoming PoE signal.

3.1. Connection Steps

1. Ensure your PoE source (e.g., PoE switch or injector) is powered on and functioning correctly.
2. Connect an Ethernet cable from your PoE source to the PoE IN port on the Intellinet Extender. This cable will provide both data and power to the extender.
3. Connect one or two Ethernet cables from the PoE OUT ports on the Intellinet Extender to your PoE-powered devices (e.g., IP cameras, wireless access points).
4. Verify that the link/activity LEDs on the extender and connected devices illuminate, indicating a successful connection and power delivery.

Figure 3.1: Example of a network setup illustrating Gigabit speeds and connections.

3.2. Mounting Options

The device can be placed on a desk or mounted to a wall using the integrated mounting holes. Ensure adequate ventilation around the unit.

4. Operation

Once connected, the Intellinet PoE+ Extender operates automatically. It transparently passes data and power, extending the reach of your PoE network without requiring any configuration.

4.1. LED Indicators

The device features LED indicators on each port to provide status information:

• Link/Activity LED: Illuminates when a valid network link is established and blinks to indicate data activity.
• PoE LED: Illuminates when Power over Ethernet is being supplied to the connected device.

Refer to the product label for specific LED behavior details.

5. Maintenance

The Intellinet PoE+ Extender is designed for minimal maintenance. Its fanless metal case ensures reliable and silent operation without moving parts.

• Keep the device in a clean, dry environment.
• Ensure proper ventilation and avoid blocking the ventilation holes.
• Clean the exterior with a soft, dry cloth as needed. Do not use liquid or aerosol cleaners.

Figure 5.1: The compact, fanless metal case design of the extender.

6. Troubleshooting

If you encounter issues with your Intellinet PoE+ Extender, refer to the following troubleshooting steps:

• No Power to Connected Devices:
  • Ensure the PoE source connected to the PoE IN port is active and providing sufficient power.
  • Check all Ethernet cable connections for secure fit.
  • Verify that the connected devices are PoE-compatible and within the power budget (up to 25W per port).
  • Test with shorter, known-good Ethernet cables to rule out cable issues.
• No Data Connection:
  • Check the Link/Activity LEDs on both the extender and the connected devices. If they are off, check cable connections and the status of the upstream network device.
  • Ensure all cables are properly terminated and not damaged.
  • Confirm that the network devices are configured correctly for data transmission.
• Intermittent Connectivity:
  • Inspect cables for damage or kinks.
  • Ensure the operating environment is within specified temperature and humidity ranges.
  • Reduce the total cable length if it approaches the maximum recommended distance (200m with one extender).

7. Specifications

8. Warranty and Support

For warranty information and technical support, please contact Intellinet Network Solutions directly. Details can typically be found on the manufacturer's website or product packaging.

You can visit the official Intellinet Store for more information and support resources: Intellinet Network Solutions Store