SKMEI SKMEI Digital Sport Watch
SKMEI Digital Sport Watch User Manual
Model: SKMEI Digital Sport Watch
Introduction
This manual provides comprehensive instructions for the operation, maintenance, and troubleshooting of your SKMEI Digital Sport Watch. Please read this manual carefully before using your watch to ensure proper function and longevity.
The SKMEI Digital Sport Watch is designed for daily use and various indoor and outdoor sports activities. It features a sleek design, a large digital display, and multiple functions including dual time, calendar, chronograph, and alarm.
Product Overview

Figure 1: Front view of the SKMEI Digital Sport Watch, displaying time, day, and date.

Figure 2: Side profile of the SKMEI Digital Sport Watch, highlighting its robust casing.

Figure 3: Top-down view of the SKMEI Digital Sport Watch, showcasing the large digital display.
Key Features:
- Dual Time Function: Allows setting and displaying time for two different time zones.
- Calendar Display: Shows month, date, and day of the week.
- Chronograph: Stopwatch function for timing activities.
- Countdown Timer: Useful for various timed tasks.
- Alarm Clock: Daily alarm function.
- LED Backlight: Electro-Luminescent (EL) backlight for easy reading in low light conditions.
- Water Resistance: Rated 50M (164 FT) for swimming, showering, and general water exposure. Note: Do not press buttons underwater or expose to hot water.
- Durable Construction: Features a scratch-resistant resin glass window and a high-elastic PC shell.
- Comfortable Band: High-quality silicone band designed for comfort and durability, suitable for various wrist sizes.
Setup
Button Functions:
The SKMEI Digital Sport Watch features four primary buttons:
- LIGHT (Top Left): Activates the EL backlight.
- MODE (Bottom Left): Cycles through different modes (Time, Alarm, Chronograph, Countdown, Dual Time).
- START (Top Right): Used to start/stop functions in Chronograph mode, and to adjust values in setting modes.
- RESET (Bottom Right): Used to reset functions in Chronograph mode, and to adjust values in setting modes.

Figure 4: Comparison of the watch display in normal mode versus with the EL backlight activated.
Setting Time and Date:
- From the Time Display Mode, press and hold the MODE button until the seconds begin to flash. This indicates you are in setting mode.
- Press the RESET button to cycle through the setting parameters: Seconds → Hours → Minutes → Year → Month → Day.
- Use the START button to adjust the flashing value. For seconds, pressing START will reset them to 00.
- Once all desired values are set, press the MODE button again to exit the setting mode and return to the Time Display.
Setting 12/24 Hour Format:
While in the Time Display Mode, press the START button to toggle between 12-hour (AM/PM indicator) and 24-hour formats.
Operating Instructions
Using the Alarm:
- From the Time Display Mode, press the MODE button once to enter Alarm Mode. The alarm time will be displayed.
- Press and hold the RESET button until the alarm hours begin to flash.
- Use the START button to adjust the alarm hours.
- Press the RESET button to move to the alarm minutes, then use the START button to adjust.
- Press the MODE button to exit alarm setting.
- To turn the alarm ON/OFF, press the START button while in Alarm Mode. An alarm icon will appear/disappear.
Using the Chronograph (Stopwatch):
- From the Time Display Mode, press the MODE button twice to enter Chronograph Mode. The display will show 00:00:00.
- Press the START button to begin timing.
- Press the START button again to pause timing.
- Press the RESET button to reset the chronograph to 00:00:00.
- To record lap times, press RESET while the chronograph is running. The lap time will freeze, but the chronograph continues to run in the background. Press RESET again to return to the running chronograph.
Using the Countdown Timer:
- From the Time Display Mode, press the MODE button three times to enter Countdown Mode.
- Press and hold the RESET button until the hours begin to flash.
- Use the START button to adjust hours, then RESET to move to minutes, and START to adjust minutes.
- Press MODE to confirm the countdown time.
- Press START to begin the countdown. Press START again to pause.
- Press RESET to reset the countdown to the set time.
Using Dual Time:
- From the Time Display Mode, press the MODE button four times to enter Dual Time Mode.
- Press and hold the RESET button until the hours begin to flash.
- Use the START button to adjust the hours, then RESET to move to minutes, and START to adjust minutes for the second time zone.
- Press MODE to exit Dual Time setting.
Maintenance
Cleaning Your Watch:
To clean your SKMEI Digital Sport Watch, wipe it with a soft, damp cloth. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the watch's finish and materials.
Water Resistance Guidelines:

Figure 5: The watch is suitable for activities like washing hands, showering, and exposure to rain.
- The watch is rated for 50 meters (5 ATM) water resistance, suitable for swimming, showering, and general water exposure.
- Important: Do not press any buttons while the watch is submerged in water. This can compromise the water seal.
- Avoid exposing the watch to hot water or steam (e.g., hot showers, saunas), as extreme temperature changes can affect the seals.
- After exposure to saltwater, rinse the watch with fresh water and dry it thoroughly.
Battery Replacement:
The watch uses 1 CR2 battery. When the display becomes dim or functions become erratic, it may be time to replace the battery. It is recommended to have battery replacement performed by a qualified watch technician to ensure the water resistance seal is properly maintained.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Low or dead battery. | Replace the battery (CR2). |
| Time is incorrect. | Time not set correctly or accidental button press. | Refer to "Setting Time and Date" section to re-adjust. |
| Buttons are unresponsive. | Watch may be in a locked mode or internal issue. | Try pressing the LIGHT button. If still unresponsive, consider battery replacement or professional service. |
| Water inside the watch. | Buttons pressed underwater or exposure to hot water/steam. | Immediately take the watch to a professional for inspection and repair to prevent further damage. |
Specifications

Figure 6: Visual representation of watch dimensions and a summary of its functions.
| Feature | Detail |
|---|---|
| Brand | SKMEI |
| Model | SKMEI Digital Sport Watch |
| Movement | Digital |
| Case Shape | Round |
| Clasp Type | Buckle |
| Water Resistance Depth | 50 meters (164 ft) |
| Dial Case Diameter | 1.97 inch / 5.0 cm |
| Case Thickness | 0.59 inch / 1.5 cm |
| Band Width | 0.87 inch / 2.2 cm |
| Band Length | 10.43 inch / 26.5 cm |
| Max Band Perimeter | 9.45 inch / 24 cm |
| Watch Weight | 2.22 oz / 63 g |
| Case Material | PC (Polypropylene) |
| Band Material | Silicone Rubber |
| Mirror Surface | Mineral Glass Mirror |
| Battery Type | 1 x CR2 (included) |
Warranty and Support
For warranty information and customer support, please refer to the retailer or the official SKMEI website. Keep your purchase receipt as proof of purchase for any warranty claims.
For further assistance or inquiries, please contact SKMEI customer service.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.