1. Introduction
This manual provides detailed instructions for the proper use and maintenance of your XtremePro XP1080BASIC Full HD Waterproof Sports Camera. Please read this manual thoroughly before operating the device to ensure optimal performance and longevity. This camera is designed for capturing high-quality video and photos in various environments, including underwater, thanks to its waterproof capabilities.
2. Package Contents
Please verify that all items listed below are present in your package:
- XtremePro XP1080BASIC Sports Camera
- Waterproof Housing
- USB Charging/Data Cable
- Various Mounting Accessories (e.g., helmet mount, handlebar mount, adhesive mounts)
- User Manual (this document)
Figure 2.1: XtremePro XP1080BASIC Sports Camera with various views and the display showing a skiing scene. This image illustrates the compact design and screen of the camera.
3. Setup
3.1. Charging the Battery
Before first use, fully charge the camera's internal battery. Connect the camera to a USB power source (e.g., computer USB port or USB wall adapter) using the provided USB cable. The charging indicator light will typically illuminate during charging and turn off or change color when fully charged.
3.2. Inserting a Micro SD Card
The camera requires a Micro SD card (not included) for storing recordings. Locate the Micro SD card slot, usually on the side or bottom of the camera. Insert the Micro SD card with the gold contacts facing the correct direction (refer to the diagram near the slot) until it clicks into place. Ensure the card is formatted to FAT32 for optimal performance. The camera may prompt you to format the card upon insertion if it's not already formatted correctly.
3.3. Attaching the Waterproof Housing
For underwater use or protection against impacts, place the camera inside the waterproof housing. Ensure the camera fits snugly and the housing's latch is securely closed. Before submerging, always perform a dry test of the housing without the camera inside to check for leaks.
3.4. Mounting the Camera
Utilize the various mounting accessories to attach the camera to helmets, handlebars, or other surfaces. Follow the instructions provided with each specific mount to ensure secure attachment. Always double-check that the camera is firmly mounted before engaging in any activity.
4. Operating the Camera
4.1. Powering On/Off
To power on the camera, press and hold the Power/Mode button (usually located on the front or top) for a few seconds until the screen illuminates. To power off, press and hold the same button until the screen turns off.
4.2. Switching Modes
Press the Power/Mode button repeatedly to cycle through different modes: Video Recording, Photo Mode, Playback Mode, and Settings Mode. The current mode is typically indicated by an icon on the camera's display.
4.3. Recording Video
In Video Recording mode, press the Shutter/OK button (usually on the top) once to start recording. A red recording indicator (e.g., a flashing light or on-screen icon) will appear. Press the Shutter/OK button again to stop recording. The camera supports 1080p, 720p, and 480p video resolutions.
4.4. Taking Photos
In Photo Mode, frame your shot using the display. Press the Shutter/OK button once to capture a still image.
4.5. Playback
In Playback Mode, use the Up/Down navigation buttons (if available) to browse through your recorded videos and photos. Press the Shutter/OK button to play a selected video or view a photo in full screen.
4.6. Accessing Settings
In Settings Mode, use the navigation buttons to scroll through menu options such as video resolution, photo resolution, loop recording, time stamp, date/time, and formatting the SD card. Press the Shutter/OK button to select an option and the Power/Mode button to exit the menu.
4.7. Connecting to a Computer
Connect the camera to your computer using the provided USB cable. The camera will typically appear as a removable disk, allowing you to transfer your video and photo files directly to your computer.
5. Maintenance
5.1. Cleaning the Camera and Lens
Use a soft, lint-free cloth to clean the camera body. For the lens, use a specialized lens cleaning cloth and solution. Avoid using abrasive materials or harsh chemicals that could scratch the lens or damage the camera's finish.
5.2. Waterproof Housing Care
After each use in water, rinse the waterproof housing with fresh water and allow it to air dry. Inspect the rubber seal (O-ring) for any debris, cracks, or damage. Keep the O-ring clean and free of foreign particles to maintain its waterproof integrity. Do not use sharp objects to clean the seal.
5.3. Battery Care
To prolong battery life, avoid exposing the camera to extreme temperatures. If storing the camera for an extended period, charge the battery to approximately 50% and store it in a cool, dry place. Recharge the battery every few months to prevent deep discharge.
5.4. Storage
Store the camera and its accessories in a dry, dust-free environment, away from direct sunlight and extreme temperatures. It is recommended to remove the Micro SD card if storing for a long duration.
6. Troubleshooting
If you encounter issues with your XtremePro XP1080BASIC camera, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Camera does not power on. | Low or depleted battery. | Charge the battery fully. |
| Camera does not power on. | System crash. | Press and hold the Power button for 10-15 seconds to force a reset. |
| Cannot record video/take photos. | No Micro SD card inserted or card is full. | Insert a Micro SD card or delete existing files to free up space. |
| Cannot record video/take photos. | Micro SD card error or not formatted. | Format the Micro SD card using the camera's settings menu or on a computer. Ensure it's a compatible card (Class 10 or higher recommended). |
| Poor image/video quality. | Dirty lens. | Clean the camera lens with a soft, lint-free cloth. |
| Poor image/video quality. | Incorrect resolution settings. | Adjust video/photo resolution in the camera's settings menu to a higher quality. |
| Camera freezes or becomes unresponsive. | Software glitch or full memory card. | Remove the battery (if removable) or hold the Power button for a long press to reset. Check and format the Micro SD card. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | XP1080BASIC |
| Brand | XtremePro |
| Video Capture Resolution | 1080p, 720p, 480p |
| Flash Memory Type | Micro SD (up to 32GB, Class 10 recommended) |
| Connectivity Technology | USB |
| Color | Black |
| Special Feature | Waterproof (with housing) |
| Lens Type | Zoom |
| Water Resistance Level | Waterproof (with housing) |
| Form Factor | Compact |
| Item Weight | 12 ounces (approx.) |
| Package Dimensions | 9 x 5 x 3 inches (approx.) |
| First Available Date | November 22, 2017 |
8. Warranty and Support
For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official XtremePro website. You may also contact XtremePro customer service directly for assistance with your XP1080BASIC camera.
Note: Warranty terms and conditions may vary by region and purchase date. Please retain your proof of purchase for warranty claims.
