1. Product Overview
The HPC Optics XBR-000213-HPC is a high-performance SFP+ optical transceiver designed for 32 Gigabit Fibre Channel (32GFC) applications. This module provides a reliable solution for short-wave (SWL) data transmission over multimode fiber (MMF) with a wavelength of 850nm, supporting distances up to 100 meters. It is fully compatible with Brocade XBR-000213 specifications, ensuring seamless integration into existing network infrastructures.
Image 1: HPC Optics 32GFC SWL SFP+ Transceiver module. This image displays the compact metal housing of the SFP+ transceiver, featuring the HPC Optics logo and "32Gb/s FC SWL SFP" printed on a label. The front end shows the dual fiber optic ports and the latch mechanism.
2. Safety Information
- Laser Safety: This product is a Class 1 Laser Product. Avoid direct exposure to the laser beam. Do not stare into the optical ports when the transceiver is active.
- Electrostatic Discharge (ESD): Always handle the transceiver with appropriate ESD precautions. Use an anti-static wrist strap and work on an ESD-safe surface to prevent damage to the device.
- Handling: Do not touch the electrical contacts or optical interfaces. Hold the transceiver by its metal casing.
- Environment: Operate the transceiver within specified environmental conditions (temperature, humidity) to ensure optimal performance and longevity.
3. Package Contents
Each package contains:
- 8 x HPC Optics XBR-000213-HPC 32GFC SWL SFP+ Transceiver Modules
4. Setup and Installation
Follow these steps to install the SFP+ transceiver module into a compatible network device:
- Prepare the Device: Ensure the host network device (e.g., switch, HBA) is powered off or the SFP+ port is disabled, if hot-swapping is not supported or desired.
- Remove Dust Cap: Carefully remove the protective dust cap from the optical ports of the SFP+ transceiver. Store the cap for future use.
- Insert Transceiver: Hold the transceiver by its metal casing. Align the SFP+ module with the SFP+ slot on the host device. Gently push the transceiver into the slot until it clicks into place. Ensure the latch mechanism is engaged.
- Connect Fiber Optic Cable: Connect a compatible LC-to-LC multimode fiber optic cable to the optical ports of the transceiver. Ensure the cable is clean and free of dust.
- Verify Connection: Once installed, power on the host device (if it was off) and verify the link status indicators on the device. A stable link light indicates a successful connection.
Note: Always ensure the fiber optic cable type (multimode) and connector type (LC) match the transceiver specifications.
5. Operating Instructions
The HPC Optics 32GFC SWL SFP+ transceiver operates by converting electrical signals into optical signals for transmission over fiber optic cables and vice-versa. Once installed and connected, the transceiver functions automatically as part of the network infrastructure.
- Data Transmission: The module facilitates high-speed data transmission at 32Gb/s over Fibre Channel networks.
- Link Monitoring: Monitor the link status and performance through the host device's management interface. Most network devices provide diagnostic information (DDM/DOM) for SFP+ modules.
- Hot-Swapping: This SFP+ module supports hot-swapping, allowing it to be inserted or removed from a powered-on host device without interrupting other operations, provided the host device also supports this feature.
6. Specifications
| Feature | Description |
|---|---|
| Model Number | XBR-000213-HPC |
| Compatibility | Brocade XBR-000213 compatible |
| Data Rate | 32Gb/s (32GFC) |
| Fiber Type | Multimode Fiber (MMF) |
| Wavelength | 850nm |
| Max Reach | Up to 100 meters |
| Connector Type | Duplex LC |
| Form Factor | SFP+ |
| Laser Class | Class 1 Laser Product |
| Item Weight | 0.8 ounces |
| Manufacturer | HPC Optics |
7. Maintenance
- Cleaning: Keep the optical ports clean. Use only approved fiber optic cleaning tools and methods to clean the LC connectors. Dust and contaminants can significantly degrade performance.
- Storage: When not in use, always replace the protective dust caps on the optical ports to prevent contamination. Store transceivers in their original packaging or an anti-static bag in a cool, dry place.
- Inspection: Periodically inspect the transceiver for any physical damage or signs of wear.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No Link Light | Transceiver not fully seated; incorrect fiber cable; dirty optical connectors; host port disabled; faulty transceiver. | Re-seat the transceiver; ensure correct multimode LC fiber cable is used; clean fiber connectors; enable host port; test with a known good transceiver. |
| Intermittent Connection | Loose fiber connection; dirty connectors; damaged fiber cable; host device issues. | Secure fiber connections; clean connectors; replace fiber cable; check host device diagnostics. |
| Low Signal Strength | Excessive cable length; dirty connectors; damaged fiber cable; incompatible fiber type. | Ensure cable length is within 100m limit; clean connectors; replace fiber cable; verify multimode fiber is used. |
9. Warranty and Support
HPC Optics provides a LIFETIME WARRANTY for this product, ensuring long-term reliability and customer satisfaction. For technical support, warranty claims, or any inquiries regarding the HPC Optics XBR-000213-HPC transceiver, please contact HPC Optics customer service through their official website or authorized distributors.
Please refer to the HPC Optics official website for the most current support contact information and detailed warranty terms and conditions.