TECH DECK Starter Kit Instruction Manual

Introduction

This manual provides instructions for the assembly, operation, and maintenance of your TECH DECK Starter Kit. Please read all instructions carefully before use to ensure proper setup and enjoyment. The kit includes various fingerboard obstacles and a fingerboard to create your own miniature skate park.

What's in the Box

Carefully unpack all components and verify that all items listed below are present:

• 1 x Fingerboard
• 1 x Box Obstacle
• 1 x Launch Ramp Obstacle
• 1 x Stair Set Obstacle
• 1 x Kicker Obstacle
• 6 x Connectors
• Trainer Clips

Image: All components of the TECH DECK Starter Kit laid out, featuring a fingerboard, various ramps, and other modular obstacles.

Setup Instructions

Follow these steps to assemble your TECH DECK skate park:

1. Unpack Components: Remove all items from the packaging.
2. Connect Obstacles: Use the provided connectors to link the various obstacles (Box, Launch Ramp, Stair Set, Kicker) together. Align the slots on the obstacles with the tabs on the connectors and press firmly to secure. Experiment with different arrangements to create unique park layouts.
3. Attach Trainer Clips (Optional): For beginners, the trainer clips can be attached to the fingerboard to assist with control and learning tricks. Place the clips over the ends of the fingerboard, ensuring they are securely fitted.

Image: A collection of TECH DECK obstacles, including ramps and ledges, along with several grey connectors and a fingerboard, demonstrating the modular nature of the kit.

Operating Instructions

To use your TECH DECK fingerboard and obstacles:

• Finger Placement: Place your index finger near the front trucks and your middle finger on the tail of the fingerboard.
• Movement: Use your fingers to push off and roll the fingerboard across surfaces and over obstacles.
• Performing Tricks: Practice lifting the tail to perform an 'ollie' or grinding on ledges and rails. The trainer clips can help maintain control while learning.
• Park Configuration: Arrange the obstacles in various ways to create different skate park challenges and practice new tricks.

Image: A detailed view of a TECH DECK fingerboard, featuring its grip tape, wheels, and the yellow trainer clips designed to assist with finger placement and control.

Maintenance

Proper care will extend the life of your TECH DECK Starter Kit:

• Cleaning: Wipe the fingerboard and obstacles with a soft, damp cloth to remove dust and dirt. Avoid harsh chemicals.
• Storage: Store the kit in a dry place away from direct sunlight and extreme temperatures to prevent material degradation.
• Inspection: Periodically check the wheels, trucks, and connectors for any signs of wear or damage. Ensure all parts are securely attached.

Troubleshooting

If you encounter any issues with your TECH DECK Starter Kit, consider the following:

• Obstacles Not Connecting: Ensure the connectors are properly aligned with the slots on the obstacles. Apply firm, even pressure.
• Fingerboard Performance: If the fingerboard wheels are not rolling smoothly, check for any debris caught in the axles. Ensure the trucks are not overly loose or tight.
• Missing Parts: Refer to the 'What's in the Box' section. If any parts are missing upon initial unboxing, contact customer support.

Safety Information

WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.

• Recommended age for use is 6 years and up.
• Adult supervision is recommended for younger users.
• Keep small parts away from infants and young children.

Specifications

Warranty and Support

For any questions, concerns, or to report missing parts, please contact the manufacturer, SPIN MASTER, directly. Please retain your proof of purchase for warranty claims, if applicable. Specific warranty details may vary by region and purchase location.