Introduction
Thank you for choosing the MAX-T 8101-usb Electric Rotary Shaver. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your new shaver. Please read these instructions thoroughly before first use and retain them for future reference.
Safety Information
For your safety and to ensure proper operation, observe the following guidelines:
- Always unplug the shaver and allow it to dry completely before use, especially after wet cleaning.
- Do not use the shaver while it is charging.
- Avoid submerging the shaver in water for extended periods, despite its waterproof rating.
- Clean the shaver regularly to prevent bacterial growth and maintain hygiene.
- Always follow the user manual for safe operation and maintenance procedures.
Product Overview
The MAX-T 8101-usb is a versatile electric rotary shaver designed for a comfortable and close shave. Key features include:
- 3D Rotary Shaving System: Equipped with 4-direction floating heads that adapt to facial contours for a smooth shave.
- Precision Steel Blades: Designed for efficient and close shaving.
- AutoSensing Motor: Intelligently adjusts power to efficiently shave even dense beards.
- IPX7 Waterproof: Allows for wet and dry shaving, and easy cleaning under running water.
- Pop-Up Trimmer: Integrated for precise trimming of sideburns and mustaches.
- LED Display: Shows battery percentage remaining and travel lock status.
- USB Quick Charge: Convenient charging via USB.
Setup
Charging the Shaver
Before first use, fully charge your MAX-T 8101-usb shaver. The shaver features a USB quick charge function.
- Connect the provided USB charging cable to the shaver's charging port.
- Plug the other end of the USB cable into a compatible USB power source (e.g., computer, USB wall adapter).
- The LED display will show the charging progress, indicating the battery percentage.
- A full charge typically takes approximately 1 hour, providing power for about 3-4 months of use (or approximately 30 full shaves).
Note: The shaver cannot be operated while charging.
Operating Instructions
Powering On/Off and Travel Lock
- To turn the shaver ON or OFF, press the power button once.
- To activate the Travel Lock, press and hold the power button for approximately 3 seconds until a lock icon appears on the LED display. This prevents accidental activation during travel.
- To deactivate the Travel Lock, press and hold the power button again for approximately 3 seconds until the lock icon disappears.
Shaving
The MAX-T 8101-usb supports both wet and dry shaving.
- Dry Shaving: For a quick shave, ensure your face is clean and dry. Move the shaver in small, circular motions against the direction of hair growth.
- Wet Shaving: For a more comfortable shave, apply shaving foam or gel to your face. Move the shaver in small, circular motions. The IPX7 waterproof design allows for safe use in the shower.
- Apply light pressure. Excessive pressure is not necessary and can cause skin irritation.
Using the Pop-Up Trimmer
To activate the pop-up trimmer, slide the trimmer release button located on the back of the shaver upwards. Use the trimmer for precise shaping of sideburns, mustaches, or detailing beard lines. After use, push the trimmer back down until it clicks into place.
Maintenance
Cleaning
Regular cleaning ensures optimal performance and hygiene.
- Turn off the shaver and unplug it from any charging source.
- Press the release button to open the shaving head unit.
- Rinse the shaving heads and the hair chamber thoroughly under running tap water. The IPX7 waterproof design allows for easy and thorough cleaning.
- For a more thorough dry clean, use the provided cleaning brush to remove any trapped hair from the shaving heads and inner chamber.
- Allow all parts to air dry completely before reassembling the shaving head unit and closing it.
Replacing Shaving Heads
For optimal shaving performance, it is recommended to replace the shaving heads periodically, typically every 12 months, depending on usage. Replacement heads can be purchased separately. Refer to the product packaging or manufacturer's website for compatible replacement head models.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Shaver does not turn on. | Battery is depleted; Travel Lock is active. | Charge the shaver fully. Deactivate Travel Lock by pressing and holding the power button for 3 seconds. |
| Reduced shaving performance. | Shaving heads are dirty or worn; Battery is low. | Clean the shaving heads thoroughly. Charge the shaver. Consider replacing shaving heads if they are old. |
| Motor slows down significantly. | Battery is low; Hair buildup in shaving heads. | Recharge the shaver. Clean the shaving heads and hair chamber. |
| Pop-up trimmer does not stay in place. | Mechanism issue. | Ensure it is pushed firmly until it clicks. If the issue persists, contact customer support. |
Specifications
| Model Number | MAX-T RMS8101A-Black (8101-usb variant) |
| Power Source | Battery Powered (Rechargeable) |
| Waterproof Rating | IPX7 (100% Waterproof) |
| Charging Time | Approx. 1 hour for full charge |
| Operating Time | Approx. 90 minutes (3-4 months or 30 shaves) |
| Special Features | Battery Indicator, Ergonomic Design, Fast Charging, Portable, Rechargeable |
| Recommended Uses | Beard, Face |
| Manufacturer | Obella |
Warranty and Support
The MAX-T 8101-usb Electric Rotary Shaver comes with a one-year return policy to cover any manufacturing defects or issues. If you encounter any problems with your product, please do not hesitate to contact the seller or manufacturer for assistance. Please retain your proof of purchase for warranty claims.