Logilink BP0042
LogiLink BP0042 TV Desk Mount Instruction Manual
Model: BP0042
Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your LogiLink BP0042 TV Desk Mount. This desk mount is designed to securely hold LCD, LED, PC, and TV monitors ranging from 13 to 32 inches, offering flexible positioning with tilt, swivel, and rotation capabilities. Please read this manual thoroughly before installation and use to ensure proper setup and safe operation.
Safety Information
- Ensure the mounting surface (desk) can support the combined weight of the mount and the display.
- Do not exceed the maximum weight capacity of 9 kg (19.8 lbs).
- Verify that your display's VESA mounting pattern is compatible (75x75 or 100x100).
- Always use appropriate tools and follow all assembly steps carefully.
- Keep small parts away from children to prevent choking hazards.
- If you encounter any difficulties or are unsure about any step, seek professional assistance.
Package Contents
Please check that all components are present before beginning installation:
- 1x Desk Mount Assembly (Main Arm and Base)
- 1x VESA Plate
- 1x Desk Clamp
- 1x Set of Mounting Hardware (Screws, Washers, Allen Keys)
- 1x Instruction Manual (this document)
Setup and Installation
Follow these steps to assemble and install your LogiLink BP0042 TV Desk Mount.
Step 1: Attach Desk Clamp to Main Arm
Secure the desk clamp to the base of the main arm. Ensure it is tightened firmly to provide a stable foundation for the mount.
Image: The LogiLink BP0042 desk mount showing the main arm connected to the desk clamp base.
Step 2: Mount to Desk
Position the desk clamp on your desired desk edge. Tighten the clamp screw until the mount is securely fastened to the desk. Ensure the desk thickness is within the mount's compatible range (min 10mm - max 85mm).
Image: The LogiLink BP0042 desk mount securely clamped to a desk surface, ready for monitor attachment.
Step 3: Attach VESA Plate to Monitor
Align the VESA plate with the mounting holes on the back of your monitor. Use the appropriate screws from the hardware kit to secure the plate to the monitor. Ensure the screws are tightened but do not overtighten.
Step 4: Mount Monitor to Arm
Carefully slide the monitor (with the attached VESA plate) onto the VESA head of the desk mount arm. Ensure it clicks into place or is secured with any provided locking mechanisms. Adjust the gas spring tension if necessary to support the monitor's weight (refer to the Operating section for gas spring adjustment).
Image: A detailed technical diagram illustrating the dimensions, VESA mounting points (75x75, 100x100), and articulation ranges including tilt (+/-90°), swivel (90°), and rotation (360°).
Operating Instructions
The LogiLink BP0042 offers versatile adjustments for optimal viewing comfort.
- Tilt Adjustment: The monitor can be tilted -90° to +90° to reduce glare and achieve the perfect viewing angle. Gently push or pull the top or bottom of the monitor to adjust.
- Swivel Adjustment: The arm allows for 90° swivel in either direction, enabling you to share your screen or adjust its position relative to your desk.
- Rotation Adjustment: The VESA plate allows for 360° rotation, enabling you to switch between landscape and portrait orientations without removing the monitor.
- Height Adjustment (Gas Lift): The integrated gas lift design allows for smooth and effortless height adjustments. Push the monitor up or down to your desired height. If the monitor drifts or is difficult to move, adjust the gas spring tension using the provided Allen key. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors.
Maintenance
To ensure the longevity and optimal performance of your desk mount:
- Regularly check all screws and connections to ensure they remain tight. Retighten if necessary.
- Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Do not hang objects from the mount or apply excessive force to the arm.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Monitor sags or won't stay at desired height. | Gas spring tension is too low for monitor weight. | Increase gas spring tension by turning the adjustment screw clockwise. |
| Monitor is difficult to move up or down. | Gas spring tension is too high for monitor weight. | Decrease gas spring tension by turning the adjustment screw counter-clockwise. |
| Mount feels unstable or wobbly. | Desk clamp is not tightened sufficiently. | Ensure the desk clamp is fully tightened to the desk. Check desk stability. |
| Monitor does not attach securely to VESA plate. | Incorrect VESA screws or misaligned plate. | Verify VESA compatibility (75x75, 100x100) and use correct screws. Ensure plate is properly seated. |
Specifications
- Model: BP0042
- Compatible Screen Sizes: 13 - 32 inches
- Maximum Weight Capacity: 9 kg (19.8 lbs)
- VESA Compatibility: 75x75 mm, 100x100 mm
- Movement Type: Rotate, Swivel, Tilt, Articulating
- Tilt Range: -90° to +90°
- Swivel Range: 90°
- Rotation: 360°
- Material: Aluminum
- Color: Silver
- Product Dimensions: 23.82 x 23.82 x 23.82 inches (approximate, as per product data)
- Item Weight: 2.2 pounds
Warranty and Support
LogiLink products are designed for quality and reliability. For warranty information and technical support, please refer to the official LogiLink website or contact your local distributor. Keep your purchase receipt as proof of purchase for warranty claims.
For further assistance, please visit: www.logilink.eu
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.