Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your WareLight Condor Premium 2FT LED High Bay fixture. Please read these instructions thoroughly before proceeding with installation or use. Retain this manual for future reference.
The WareLight Condor Premium LED High Bay is designed for commercial and industrial applications, offering high-performance LED illumination with selectable color temperature and dimming capabilities. Its robust construction ensures long-lasting performance in demanding environments.
Safety Information
- Always disconnect power before installation, maintenance, or servicing.
- Installation should be performed by a qualified electrician in accordance with national and local electrical codes.
- Ensure the fixture is securely mounted to prevent falling.
- Do not operate the fixture with damaged wiring or components.
- Avoid direct eye exposure to the light source when the fixture is operating.
- This fixture is rated for damp locations. Do not submerge or expose to direct water spray.
Setup and Installation
The WareLight Condor Premium LED High Bay is designed for straightforward installation. It comes equipped with robust V-clips for quick chain mounting. Conduit or surface mounting options are also available; however, additional hardware for these methods is not included.
The fixture features an accessible junction box for wiring, simplifying the electrical connection process. For optimal convenience, pre-shipped installation services are available, ensuring the fixture is ready for immediate setup upon arrival.
Image: The WareLight Condor Premium LED High Bay fixture, shown hanging by chains, illustrating its primary mounting method.
Image: A diagram detailing the easy installation process using V-clips for chain mounting, and mentioning conduit/surface mounting options.
Video: An official WareLight video demonstrating the features and installation process of the LED Linear High Bay, including mounting and wiring.
Operating Instructions
The Condor Premium LED High Bay offers versatile operating features to suit various lighting needs:
- Voltage Range: Operates on a voltage range of 120-277V.
- Selectable Color Temperature (CCT): Easily switch between 4000K (Cool White) and 5000K (Daylight) to match your desired lighting environment.
- 0-10V Dimming: The fixture supports 0-10V continuous dimming, allowing for precise control over light output when used with compatible dimmers.
- Motion Sensor Compatibility: An optional PIR (Passive Infrared) motion sensor can be integrated for automated lighting control, enhancing energy efficiency.
- Smart Control: The fixture is compatible with the WareSense Blue Bluetooth app for advanced lighting controls and customization.
Image: A graphic highlighting the 100,000-hour lifespan of the LEDs and suitable applications such as warehouses, gyms, and retail spaces.
Image: An interior view of a warehouse illuminated by high-efficiency lighting, with icons indicating 0-10V dimming, DLC, UL certifications, and the WareLight brand.
Maintenance
The WareLight Condor Premium LED High Bay is designed for minimal maintenance due to its long-life LED technology. The LEDs are rated for over 100,000 hours of operation, significantly reducing the need for frequent bulb replacements.
- Cleaning: Periodically clean the exterior of the fixture with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
- Inspection: Regularly inspect the fixture and its mounting hardware for any signs of damage or wear. Address any issues promptly to ensure safe operation.
- Temperature Range: The fixture is designed to operate in temperatures ranging from -4°F to 122°F (-20°C to 50°C). Ensure the operating environment stays within this range.
Troubleshooting
If you encounter issues with your WareLight Condor Premium LED High Bay, refer to the following common troubleshooting steps:
- No Light:
- Check the power supply to the fixture. Ensure the circuit breaker is on.
- Verify all wiring connections are secure and correct.
- If using a motion sensor or smart control, ensure it is configured correctly and not in an 'off' state.
- Flickering Light:
- Ensure the voltage supply is stable and within the specified range (120-277V).
- If using a dimmer, confirm it is a compatible 0-10V dimmer and functioning correctly.
- Check for loose wiring connections.
- Incorrect Color Temperature:
- Verify the CCT selection switch on the fixture is set to your desired color temperature (4000K or 5000K).
If these steps do not resolve the issue, contact WareLight customer support for further assistance.
Specifications
Detailed technical specifications for the WareLight Condor Premium 2FT LED High Bay 85 Watt fixture:
Image: A visual representation of the fixture's dimensions (23.8"L x 12.6"W x 3.6"H) and key electrical specifications including 85 Watts, 120-277 Volts (AC), 11560 Lumens, and 4000K/5000K Selectable Temperature.
| Feature | Specification |
|---|---|
| Brand | WareLight |
| Model Number | HBLED85W/2CCTFR |
| Wattage | 85 Watts |
| Brightness | 11560 Lumens |
| Color Temperature | 4000K/5000K Selectable |
| Voltage | 120-277 Volts (AC) |
| Lifespan | 100,000 Hours |
| Product Dimensions | 23.8"L x 12.6"W x 3.6"H |
| Item Weight | 10.68 pounds |
| Material | Metal |
| Finish Type | Matte |
| Installation Type | Hanging (V-clips included) |
| Indoor/Outdoor Usage | Indoor use only |
| Operating Temperature | -4°F to 122°F (-20°C to 50°C) |
| Certifications | UL Listed, DLC Premium |
Warranty and Support
The WareLight Condor Premium LED High Bay is backed by a 5-year warranty, providing assurance of quality and performance. This warranty covers defects in materials and workmanship under normal use and service.
The fixture is UL Listed and DLC Premium certified, indicating compliance with high standards for safety and energy efficiency.
For technical support, warranty claims, or any questions regarding your product, please contact WareLight customer service through their official channels or visit their website.
Image: The WareLight brand logo with the slogan 'Lighting Built to Last', emphasizing product durability and reliability.
