Important Safety Instructions
Read all instructions before using this appliance. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Always ensure the appliance is unplugged before filling or emptying the water tank.
- Do not leave the steam mop unattended while it is plugged in or operating.
- Keep children and pets away from the appliance when it is in use.
- Use only distilled or demineralized water in the steam mop to prevent mineral buildup.
- Do not use the steam mop on unsealed wood floors, unglazed ceramic, or any surface that is sensitive to heat or moisture.
- Always allow the appliance to cool down completely before storing.
Product Overview
The Black+Decker FSM13E1 Steam Mop is designed for efficient and hygienic cleaning of sealed hard floors. Its powerful steam action eliminates 99.9% of household germs without the need for harsh chemicals.
Figure 1: Front view of the Black+Decker FSM13E1 Steam Mop, showcasing its sleek design and handle.
Figure 2: Angled view of the steam mop, highlighting the water tank and control buttons.
Setup
- Assemble the Handle: Insert the handle into the main body of the steam mop until it clicks securely into place.
- Attach the Microfiber Pad: Place the microfiber cleaning pad onto the bottom of the mop head, ensuring it is centered and securely attached. The pad is designed for easy attachment and removal.
- Fill the Water Tank: Open the water tank cap. Using a measuring cup, fill the water tank with clean, distilled or demineralized water. Do not overfill. Close the cap securely. The tank capacity is approximately 380 milliliters.
- Plug In: Plug the power cord into a grounded electrical outlet.
Figure 3: Demonstrates the process of filling the water tank with water, ensuring proper hydration for steam generation.
Operating Instructions
- Power On: Press the power button. The steam mop will heat up and be ready for use in approximately 25 seconds.
- Begin Cleaning: Once heated, move the steam mop across the sealed hard floor surface. The 180° swivel foot allows for easy maneuverability around furniture and into corners.
- Steam Output: The mop provides continuous high-temperature steam for effective cleaning and sanitization.
- Refilling: If the water tank becomes empty during use, unplug the unit, allow it to cool slightly, and refill as per step 3 in the Setup section.
- Power Off: When finished cleaning, press the power button to turn off the unit and unplug it from the electrical outlet.
Figure 4: A user operating the steam mop on a hard floor, demonstrating its ease of use.
Figure 5: The steam mop reaching under furniture, showcasing its flexible design.
Maintenance
- Cleaning the Microfiber Pad: The microfiber pad can be easily removed and is machine washable. Wash with similar colors and air dry for best results. Do not use bleach or fabric softeners.
- Emptying the Water Tank: After each use, empty any remaining water from the tank. This helps prevent mineral buildup and prolongs the life of the appliance.
- Descaling (Periodic): Depending on water hardness, periodic descaling may be necessary. Consult the full product manual for detailed descaling instructions.
- Storage: Store the steam mop in a dry, cool place. Ensure the power cord is neatly wrapped.
Figure 6: Illustration of how to easily remove the microfiber cleaning pad from the mop head for washing.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No steam produced. | Water tank is empty. Appliance not plugged in or not powered on. Unit not heated up. | Refill water tank. Ensure unit is properly plugged in and power button is pressed. Wait approximately 25 seconds for the unit to heat. |
| Mop leaves streaks. | Microfiber pad is dirty. Too much water/steam. | Clean or replace microfiber pad. Ensure pad is not oversaturated. |
| Appliance not turning on. | No power to the outlet. Power cord damaged. | Check power outlet with another appliance. Do not use if power cord is damaged; contact customer support. |
Specifications
- Model: FSM13E1
- Power: 1300 Watts
- Voltage: 230 Volts
- Water Tank Capacity: Approximately 380 Milliliters
- Heat-up Time: Approximately 25 seconds
- Weight: 1.75 Kilograms
- Dimensions (L x W x H): 70.2 x 19.3 x 11.7 cm
- Features: Lightweight, Portable, 180° Swivel Foot
Warranty and Support
BLACK+DECKER products are manufactured to high quality standards and are guaranteed for professional and domestic use. For detailed warranty information, product registration, or technical support, please visit the official BLACK+DECKER website or contact their customer service department.
Online Support: www.blackanddecker.com
Customer Service: Refer to your regional BLACK+DECKER contact information for phone support.
