Introduction
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your ELG Fixed TV Wall Mount, Model N01V4. Please read all instructions carefully before beginning installation to ensure correct setup and to prevent damage or injury.
Safety Information
- Weight Capacity: Do not exceed the maximum weight capacity of 110.2 lbs (50 kg).
- TV Size: Compatible with most TVs from 26 to 65 inches.
- Wall Type: Suitable for installation on wood studs, concrete, and brick walls. DO NOT INSTALL ON DRYWALL ALONE.
- Professional Installation: If you are unsure about the installation process, consult a qualified professional.
- Children: Wall-mounting your TV can help eliminate tip-over risks associated with freestanding TVs. Ensure all components are securely fastened.
Package Contents
Verify that all components are present and undamaged before installation. If any parts are missing or damaged, contact ELG customer support.
- 1 x TV Wall Mount Support
- 1 x Installation Manual
- 1 x Accessory Kit (includes bubble level, spacers, and various screws/anchors)
Specifications
| Feature | Detail |
|---|---|
| Mounting Type | Wall Mount |
| Movement Type | Fixed |
| Material | Metal |
| Color | Black |
| Compatible TV Sizes | 26 - 65 inches (Minimum 32 inches, Maximum 77 inches) |
| Maximum Load Capacity | 110.2 lbs (50 kg) |
| VESA Compatibility | 100x100mm to 400x400mm |
| Wall Distance (Slim Profile) | 1.18 inches (3cm), up to 1.77 inches (4.5cm) with spacers |
| Item Weight | 1.2 kg |
Setup and Installation
The ELG Fixed TV Wall Mount N01V4 is designed for quick and easy installation. It comes pre-assembled and includes all necessary hardware.
1. Determine VESA Compatibility
Before installation, identify the VESA pattern on the back of your TV. VESA refers to the distance in millimeters (mm) between the four screw holes where the mount will attach. You can find this information in your TV's manual or by measuring the distance between the screw holes horizontally and then vertically.
Image: Diagram illustrating how to measure VESA mounting holes on the back of a television.
2. Install Parts on the Back of Your TV
Attach the TV brackets to the back of your television using the appropriate screws and spacers from the accessory kit. Ensure they are securely fastened.
3. Choose Ideal Height and Install Wall Plate
Select the desired height for your TV on the wall. Use the included bubble level to mark the drilling points accurately. Drill pilot holes and securely attach the wall plate to wood studs, concrete, or brick walls using the provided anchors and screws. Remember, do not install on drywall alone.
Image: A person installing the wall mount bracket onto a wall, using a bubble level to ensure it is straight.
4. Hang Your TV
Carefully lift your TV and align the brackets on the back of the TV with the wall plate. Engage the easy lock system for secure attachment. The pull-down straps allow for quick release when needed.
Image: A three-step diagram illustrating the installation process: 1. Install parts on TV, 2. Install parts on wall, 3. Hang TV.
Installation Video Guide
Video: A detailed guide demonstrating the installation process for the ELG Fixed TV Wall Mount, including mounting the bracket to the wall and attaching the TV.
Video: An instructional video showcasing the features and installation of the ELG Fixed TV Wall Mount for various TV sizes.
Operating the Mount
Once installed, the ELG Fixed TV Wall Mount provides a secure, low-profile solution for your television. As a fixed mount, it does not offer tilt or swivel adjustments.
Attaching the TV
- Ensure the TV brackets are securely attached to the back of your TV.
- Carefully lift the TV and hook the top of the TV brackets onto the top edge of the wall plate.
- Lower the TV until the bottom of the TV brackets engage with the wall plate, and the automatic locking mechanism clicks into place.
- Gently pull on the bottom of the TV to confirm it is securely locked.
Removing the TV
- Locate the pull-down straps at the bottom of the TV brackets.
- Pull both straps downwards simultaneously to disengage the locking mechanism.
- While holding the straps, carefully lift the TV upwards and away from the wall plate.
Maintenance
The ELG Fixed TV Wall Mount is constructed from durable materials with an electrostatic epoxy coating and anti-corrosion treatment, requiring minimal maintenance.
- Cleaning: Wipe the mount with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
- Periodic Checks: Periodically check all screws and connections to ensure they remain tight and secure.
- Damage: If any part of the mount appears damaged or worn, discontinue use and contact customer support.
Troubleshooting
TV Not Level
- Ensure the wall plate was installed perfectly level using the bubble level. If not, you may need to re-adjust the wall plate.
- Some mounts allow for minor post-installation leveling adjustments. Refer to the specific design of your mount for any such features.
TV Not Securely Attached
- Verify that the TV brackets are correctly seated on the wall plate and the automatic locking mechanism has engaged.
- Ensure all screws attaching the brackets to the TV and the wall plate to the wall are tightened appropriately.
Missing Parts or Damaged Components
- Do not proceed with installation if parts are missing or damaged.
- Contact ELG customer support for replacement parts.
Warranty and Support
ELG products are engineered for quality and precision. This product is backed by over 23 years of experience in AV mounting solutions.
For support, technical assistance, or to inquire about warranty claims, please contact ELG customer service through their official website or the retailer where the product was purchased. A 30-day return policy is typically offered by retailers.
For more information, visit the ELG Store on Amazon.