1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your TMEZON 1080P Video Intercom System. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
2. Safety Information
- Ensure all power is disconnected before installation or maintenance.
- Installation should be performed by qualified personnel if you are unsure about electrical wiring.
- Do not expose the outdoor unit to extreme temperatures or direct water immersion.
- Use only the power adapters supplied with the system.
- Keep the monitor away from high humidity and heat sources.
3. Package Contents
Verify that all items are present in your package:
- 2 x 7-inch LCD Indoor Monitors
- 1 x 1080P Outdoor Doorbell Camera
- Power Adapters for Monitors
- Mounting Brackets and Screws
- Wiring Connectors (4-pin)
- User Manual
4. Product Overview
The TMEZON Video Intercom System provides secure and convenient communication with visitors. It includes indoor monitors and an outdoor doorbell camera.
Image 4.1: TMEZON 1080P Video Intercom System components.
Image 4.2: Dimensions of the indoor monitor (236mm x 143mm x 16mm) and outdoor doorbell camera (128mm x 48mm x 29mm).
5. Key Features
- 1080P HD Camera: High-definition video for clear visitor identification.
- 7-inch LCD Monitor: Color display with a user-friendly interface.
- Two-Way Audio: Communicate with visitors from your indoor monitor.
- Night Vision: Infrared LEDs provide clear visibility in low-light conditions.
- Motion Detection: Automatically captures snapshots or records video when motion is detected.
- Automatic Recording/Snapshot: Records video or takes pictures of visitors when the doorbell rings or motion is detected. Supports external SD card (up to 64GB, sold separately) for storage. Internal memory stores approximately 80 images.
- One-Key Unlock: Remotely unlock an electronic door lock from the indoor monitor.
- Multiple Intercoms: Supports up to 4 indoor monitors and 2 doorbell cameras. Allows communication between monitors.
- Multi-Device Connection: Can connect with 2 additional 1080P CCTV cameras, 2 PIR alarms, and 2 electronic locks.
- IP65 Weatherproof: Outdoor doorbell camera is designed to withstand various weather conditions.
Image 5.1: Overview of advanced video door phone features.
Image 5.2: Demonstration of HD 1080P clarity and infrared night vision.
Image 5.3: The doorbell camera's IP65 weatherproof design.
6. Setup
6.1 Wiring Diagram
The system uses a 4-wire connection between the indoor monitor and the outdoor doorbell camera. Extension cables are not included but 4-pin connectors are provided. You can use RVV4 (4-conductor cable) / Cat5 / Cat6 cable for extensions up to 100-200 meters.
Image 6.1: System wiring diagram for connecting multiple devices.
6.2 Installation Steps
- Mount the Outdoor Doorbell Camera: Choose a suitable location at your entrance, typically at eye level. Use the provided mounting bracket and screws to secure the doorbell camera. Ensure it is protected from direct heavy rain if possible, despite its weatherproof rating.
- Mount the Indoor Monitors: Select desired locations inside your home. Attach the mounting brackets to the wall using screws.
- Connect Wiring:
- Connect the 4-wire cable from the outdoor doorbell to the designated port on the indoor monitor.
- If using multiple monitors, connect them in series or parallel as per the wiring diagram.
- Connect power adapters to the indoor monitors.
- If connecting additional CCTV cameras, PIR alarms, or electronic locks, follow the specific wiring instructions for those devices and connect them to the appropriate ports on the monitor.
- Power On: Once all connections are secure, plug in the power adapters for the indoor monitors. The system should power on automatically.
- Initial Configuration: Follow the on-screen prompts on the indoor monitor to set up basic settings such as language, date, and time.
7. Operating Instructions
7.1 Basic Functions
- Answering a Call: When a visitor presses the doorbell, the indoor monitor will ring and display the visitor's image. Press the 'Talk' button on the monitor to communicate.
- Unlocking the Door: During a call or monitoring, press the 'Unlock' button on the monitor to open a connected electronic door lock.
- Monitoring: Press the 'Monitoring' button on the indoor monitor to view the live feed from the outdoor doorbell camera at any time.
- Ending a Call: Press the 'Hang up' button to end communication.
Image 7.1: Two-way audio and one-key unlock functionality.
7.2 Menu Navigation
The 7-inch LCD monitor features a graphical user interface for easy navigation.
Image 7.2: Monitor's main menu for system settings and functions.
- Settings: Adjust system parameters such as language, date/time, display brightness, and recording preferences.
- Ring: Select doorbell melodies and adjust volume levels.
- Mode: Configure operating modes, including motion detection sensitivity.
- Memory: View available storage on the SD card (if installed) and internal memory.
- Files: Access recorded videos and snapshots.
- About: Display system information and firmware version.
7.3 Recording and Playback
The system automatically records video or takes snapshots when the doorbell is pressed or motion is detected.
Image 7.3: Video record and playback feature.
- Accessing Files: Navigate to the 'Files' menu on the monitor to browse recorded events.
- Playback: Select a file to play back recorded video or view snapshots.
- SD Card: For extended storage, insert a micro SD card (up to 64GB, not included) into the monitor's slot.
7.4 Intercom Communication
The system supports internal communication between multiple indoor monitors.
Image 7.4: Multiple intercom conversation feature.
- Initiating a Call: From one indoor monitor, select the desired monitor to call and press the 'Transfer Call' button.
- Answering an Internal Call: The receiving monitor will ring. Press the 'Talk' button to establish communication.
8. Maintenance
- Cleaning: Use a soft, dry cloth to clean the monitor screen and doorbell camera lens. Do not use abrasive cleaners or solvents.
- Firmware Updates: Check the manufacturer's website periodically for any available firmware updates to ensure optimal performance and security.
- Cable Inspection: Regularly inspect all wiring for any signs of damage or wear.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on monitor | Loose wiring connection; Power issue; Camera malfunction. | Check all cable connections. Ensure power adapter is properly plugged in. Contact support if issue persists. |
| No audio during communication | Microphone/speaker issue; Volume too low; Wiring problem. | Check volume settings on the monitor. Verify wiring connections. |
| Doorbell not ringing | Doorbell button malfunction; Wiring issue; Ringtone volume too low. | Check doorbell wiring. Adjust ringtone volume in monitor settings. |
| Door lock not unlocking | Incorrect wiring to electronic lock; Lock malfunction; Power supply issue to lock. | Verify electronic lock wiring and power supply. Ensure the lock is compatible. |
| Motion detection not working | Sensitivity settings too low; Obstruction in camera view. | Adjust motion detection sensitivity in monitor settings. Clear any obstructions. |
10. Specifications
- Brand: TMEZON
- Model Number: HM-VDP-739EM/2M1C/EU
- Indoor Monitor: 7-inch LCD, Touch Button
- Outdoor Doorbell Camera: 1080P HD, 120-degree viewing angle, Night Vision, IP65 Weatherproof
- Connectivity: 4-wire system
- Storage: Supports external Micro SD card up to 64GB (not included), internal memory for approx. 80 images
- Dimensions (Monitor): 236 x 143 x 16 mm
- Dimensions (Doorbell): 128 x 48 x 29 mm
- Operating Temperature: -30°C to 50°C (for outdoor unit)
11. Warranty and Support
For technical assistance, warranty information, or any inquiries regarding your TMEZON Video Intercom System, please contact our support team:
Email: support@tmezon.com
Please provide your model number (HM-VDP-739EM/2M1C/EU) and a detailed description of your issue when contacting support.
