Freestyle Lite Blood Glucose Test Strips

1. Introduction

This manual provides essential instructions for the proper use and care of Freestyle Lite Blood Glucose Test Strips. These test strips are designed for use with compatible Freestyle Lite blood glucose monitoring systems to measure glucose levels in whole blood.

Accurate blood glucose monitoring is crucial for managing diabetes. Please read this manual thoroughly before using the test strips to ensure correct procedure and reliable results.

2. Safety Information

• Keep out of the reach of children.
• For in vitro diagnostic use only. Do not ingest.
• Do not use test strips past their expiration date.
• Store test strips in their original vial with the cap tightly closed.
• Avoid exposing test strips to direct sunlight, heat, or moisture.
• Consult your healthcare professional for interpretation of results and treatment decisions.

3. Product Overview

Freestyle Lite Blood Glucose Test Strips are advanced strips designed for ease of use and accuracy. Key features include:

• Tiny Sample Size: Requires only 0.3 µL of blood, minimizing discomfort.
• Patented ZipWik Tabs: Designed for quick and easy blood application.
• 60-Second Re-application Time: Allows up to 60 seconds to re-apply blood to the same strip, reducing wasted strips.
• No Coding Required: Eliminates a step in the testing process, simplifying use.

Image Description: This image displays the product packaging for Freestyle Lite Blood Glucose Test Strips. The packaging clearly indicates 'FreeStyle Lite Blood Glucose Test Strips' and highlights key features such as 'No Coding Required'. It also lists compatible monitoring systems: FreeStyle Freedom, FreeStyle Lite, FreeStyle Freedom Lite, FreeStyle InsuLinx, and FreeStyle Navigator. A single test strip is partially visible on the left side of the packaging.

4. Compatible Monitoring Systems

Freestyle Lite Blood Glucose Test Strips are specifically designed for use with the following FreeStyle blood glucose monitoring systems:

• FreeStyle Lite
• FreeStyle Freedom Lite
• FreeStyle Freedom
• FreeStyle InsuLinx
• FreeStyle Navigator

Ensure your meter is compatible before use. These test strips are not intended for use with other blood glucose monitoring systems.

5. Setup and Preparation

1. Gather Supplies: Ensure you have your Freestyle Lite Blood Glucose Meter, a Freestyle Lite Test Strip, a lancing device, and a new lancet.
2. Wash Hands: Wash your hands thoroughly with warm, soapy water. Rinse and dry them completely. This helps prevent infection and ensures an accurate sample.
3. Prepare Lancing Device: Load a new lancet into your lancing device according to its instructions.
4. Select Test Site: Depending on your monitoring system, you can test on your finger, hand, forearm, upper arm, calf, or thigh. For alternate site testing, rub the chosen site vigorously for a few seconds until it feels warm to bring fresh blood to the surface.

6. Operating Instructions (Performing a Blood Glucose Test)

1. Insert Test Strip: Remove a test strip from the vial and immediately close the vial cap tightly. Insert the test strip into the meter. Most meters will turn on automatically. If not, power on your meter.
2. Check Coding (if applicable): For meters that require coding, ensure the code displayed on the meter screen matches the code on the test strip vial. Refer to your meter's Owner's Booklet for coding instructions if they do not match. Note: Freestyle Lite Test Strips typically do not require coding.
3. Obtain Blood Sample: When the meter prompts you to apply a blood sample, use your lancing device to obtain a drop of blood from your prepared test site.
4. Apply Blood Sample: Gently touch one sample application area of the test strip to the blood sample. The strip will draw the blood in. Do not apply the sample to both edges of the strip, and do not put the sample on top of the sample application area.
5. Re-apply (if needed): If the strip does not fill completely, you have up to 60 seconds to re-apply blood to the same area of the test strip.
6. Wait for Result: Once the strip is full, the meter will typically "beep" or display moving lines, indicating it is processing the sample. Your blood glucose result will appear on the screen.
7. Record Result: Record your blood glucose result as advised by your healthcare professional.
8. Dispose of Strip and Lancet: Safely dispose of the used test strip and lancet in a sharps container or according to local regulations.

7. Storage and Maintenance

• Store test strips in their original vial only. Do not transfer them to another container.
• Keep the vial cap tightly closed immediately after removing a test strip to protect them from air and moisture.
• Store test strips at room temperature, away from direct sunlight and heat. Refer to the vial label for specific temperature ranges.
• Do not refrigerate or freeze test strips.
• Check the expiration date on the vial. Discard any expired test strips.

8. Troubleshooting Common Issues

For further troubleshooting, please refer to your Freestyle Lite Blood Glucose Monitoring System's Owner's Booklet or contact customer support.

9. Product Specifications

• Brand: Freestyle Lite
• Manufacturer: NovoFine
• Product Dimensions: 2 x 2 x 2.25 inches
• Product Weight: 0.32 ounces
• Number of Pieces: 50 (per package)
• Special Features: Disposable, Instant Result, Self Test
• Test Type: Blood Glucose
• Specific Uses: Blood Glucose Test
• ASIN: B075VD1JTW
• Date First Available: September 22, 2017

10. Legal Disclaimer

Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

11. Warranty and Support

For information regarding product warranty, technical support, or to report any issues, please refer to the contact information provided with your Freestyle Lite Blood Glucose Monitoring System or visit the official Freestyle Lite website.

It is recommended to keep your purchase receipt for warranty purposes.