1. Introduction
Thank you for choosing the HROOME Tall Wood Floor Lamp. This unique and adjustable floor lamp is designed to provide both illumination and a distinctive decorative element to your living space. Crafted from plywood, its articulated design allows for various poses, making it a versatile addition to bedrooms, living rooms, kids' rooms, or offices. This manual provides essential information for safe assembly, operation, and maintenance of your new lamp.
2. Safety Information
- Always unplug the lamp from the power outlet before cleaning, changing the light bulb, or performing any maintenance.
- Ensure the lamp is placed on a stable, level surface to prevent tipping.
- This lamp is designed for indoor use only. Do not expose it to moisture or extreme temperatures.
- Use only E26 base bulbs with a maximum wattage of 60 watts. Using a bulb with higher wattage may cause overheating and fire hazard.
- Keep the power cord away from heat sources, sharp edges, and heavy objects. Do not place the cord under rugs or furniture.
- Do not attempt to modify or repair the lamp yourself. Contact qualified service personnel for repairs.
3. Package Contents
Carefully unpack all components and check against the list below. If any parts are missing or damaged, please contact HROOME customer support.
- Plywood body pieces (base, legs, torso, arms, head)
- Fabric lamp shade (unassembled)
- Light socket (E26)
- Power cord with push-button switch
- LED bulb
- Assembly hardware (bolts, washers)
- Allen wrenches
- White gloves (for handling components during assembly)
Figure 3.1: All components included in the HROOME Tall Wood Floor Lamp package.
4. Setup and Assembly Instructions
Assembly of the HROOME Tall Wood Floor Lamp is straightforward. Please follow these steps carefully. It is recommended to wear the provided white gloves to prevent smudges on the wood finish.
- Assemble the Base and Legs: Attach the leg pieces to the base using the provided bolts and washers. Ensure all connections are secure but allow for slight movement if you wish to adjust the leg positions later.
- Assemble the Torso and Arms: Connect the torso and arm pieces using the remaining bolts and washers. Ensure all connections are tightened sufficiently to hold desired poses, but not so tight as to prevent movement.
- Attach the Head Piece: Secure the head piece, which holds the light socket, to the top of the torso.
- Install the Lamp Shade: The fabric lamp shade comes in three pieces. Assemble the shade by attaching the fabric to the metal rings using the Velcro strips. Once assembled, secure the shade to the head piece.
- Install the Light Bulb: Carefully screw the provided LED bulb into the E26 light socket.
- Route the Power Cord: Guide the power cord along the lamp's body, securing it as needed to maintain the desired aesthetic and prevent tangling.
Video 4.1: Official HROOME assembly guide for the Modern Contemporary Decorative Wood Floor Lamp. This video demonstrates the step-by-step process of putting together the lamp's wooden components, attaching the lampshade, and installing the light bulb.
Figure 4.2: The adjustable joints of the lamp allow for various creative positions.
5. Operating Instructions
To operate your HROOME Tall Wood Floor Lamp:
- Power On/Off: Plug the lamp into a standard AC power outlet. Use the push-button switch located on the power cord to turn the lamp on or off.
- Adjusting Poses: The lamp's body, arms, and legs are designed with adjustable joints. To change a pose, gently loosen the corresponding bolts with the provided Allen wrench, reposition the limb, and then re-tighten the bolts to secure the new position. Ensure all bolts are sufficiently tightened to maintain stability.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your lamp.
- Cleaning: Dust the lamp regularly with a soft, dry cloth. For the wooden parts, avoid using abrasive cleaners or harsh chemicals that could damage the finish. The fabric shade can be gently spot cleaned with a damp cloth if necessary.
- Bulb Replacement: Ensure the lamp is unplugged before replacing the bulb. Allow the old bulb to cool completely. Unscrew the old bulb and screw in a new E26 base LED bulb (maximum 60 watts).
- Joint Tightness: Periodically check the tightness of all bolts in the adjustable joints. If any joint feels loose, use the provided Allen wrench to tighten it.
7. Troubleshooting
If you encounter any issues with your lamp, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on | 1. Lamp unplugged 2. Bulb loose or faulty 3. Power switch off | 1. Ensure lamp is securely plugged into a working outlet. 2. Check if the bulb is screwed in tightly. Replace bulb if necessary. 3. Press the push-button switch on the cord to turn on. |
| Lamp joints are loose and do not hold position | Bolts are not tightened sufficiently | Use the provided Allen wrench to tighten all bolts at the joints until the desired stiffness is achieved. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | HROOME |
| Model Number | ATFLP003B |
| Material | Plywood |
| Finish Type | Plywood |
| Color | Ash |
| Product Dimensions | 6.71"D x 30.32"W x 62.21"H |
| Item Weight | 9.93 Pounds |
| Light Source Type | LED |
| Bulb Base | E26 |
| Wattage | 60 watts (Max) |
| Switch Type | Push Button |
| Voltage | 110 Volts |
| Indoor/Outdoor Usage | Indoor |
| Assembly Required | Yes |
9. Warranty and Support
HROOME is committed to ensuring your satisfaction. We offer full support for our products. If your lamp has any defect or stops working, or if you encounter any problems, please contact the HROOME Service Team. We guarantee a response within 24 hours during working days and are dedicated to making things right for your purchasing experience.
For support, please refer to the contact information provided with your purchase or visit the official HROOME store on Amazon: HROOME Store