Product Overview
The DEEIRAO Keyhole Motion Sensor LED Light is a battery-powered, wireless lighting solution designed to illuminate keyholes, hallways, kitchens, stairways, and other dark areas. It features an infrared (PIR) motion sensor and a light sensor for automatic operation, ensuring light is provided only when needed in low-light conditions.
Image: Overview of the DEEIRAO Keyhole Motion Sensor LED Light, highlighting its key features: LED light, movement detection, built-in light sensor, automatic on/off, and overlong standby.
Package Contents
- 1x DEEIRAO Keyhole Motion Sensor LED Light
- 1x Double-sided adhesive tape
- 1x User manual
Image: The package contents, including the LED light unit, double-sided adhesive tape, and user manual.
Setup
1. Battery Installation
- Gently push and pull back the cover of the light unit to access the battery compartment.
- Insert 1x AA battery (not included) into the compartment, ensuring correct polarity (+/-).
- Slide the cover back into place until it clicks securely.
Image: The back of the light unit with the cover removed, revealing the battery compartment for a single AA battery and the designated area for double-sided adhesive.
Image: A close-up showing the process of installing the AA battery into the light unit.
2. Power On/Off
Locate the small switch on the side of the unit. Slide it to the 'ON' position to activate the light's functions.
Image: The side of the light unit, indicating the power switch for turning the device on or off, and the screw holes for alternative mounting.
3. Mounting
The light offers two installation methods:
- Adhesive Mounting: Clean the desired smooth surface. Peel off the backing from the double-sided adhesive tape and firmly press the light unit onto the surface.
- Screw Mounting: For a more permanent installation, use screws (D3x20cm recommended, not included) through the designated holes on the back plate.
Image: Visual representation of the two installation options: using the strong double-sided adhesive or securing the unit with screws.
Operating Instructions
The DEEIRAO Keyhole Motion Sensor LED Light operates automatically based on ambient light and motion detection.
- Automatic On/Off: The light will automatically turn on in dark environments when motion is detected. It will automatically turn off when strong light is present or after a period of no motion.
- Motion Sensor: The integrated PIR sensor detects human body movement within its range.
- Light Sensor: The light sensor ensures the unit only activates in low-light conditions, conserving battery life during the day.
Image: Examples of where the light can be used, including keyholes, kitchen cabinets, hallways, and stairways.
Video: Official product video demonstrating the DEEIRAO Keyhole Auto Sensor Motion Detector LED Light in various settings.
Maintenance
- Battery Replacement: When the light output diminishes, replace the AA battery following the installation steps.
- Cleaning: Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Insufficient darkness; batteries are dead or incorrectly installed; power switch is off. | Ensure the environment is dark enough for activation. Check battery orientation and replace if necessary. Verify the power switch is in the 'ON' position. |
| Motion sensor is not sensitive. | Strong ambient light interfering with the sensor. | The motion sensor is less sensitive in brighter conditions. Use the light in dark areas for optimal performance. |
| Light turns off too quickly. | Standard operating behavior. | The light is designed to turn off after a short period (typically 5-8 seconds) of no detected motion to conserve battery. |
Specifications
- Brand: DEEIRAO
- Model Number: L0403
- Color: Silver
- Material: Plastic, Acrylonitrile Butadiene Styrene
- Light Source: 4x LED bulbs
- Power Source: 1x AA Battery (1.5 Volts)
- Control Method: Motion Sensor, Light Sensor
- Indoor/Outdoor Usage: Indoor
- Mounting Type: Adhesive, Screw
- Item Dimensions (L x W x H): 3.19" x 1.81" x 1.18"
- Item Weight: 0.11 Pounds
Image: Diagram illustrating the length, width, and height of the light unit in centimeters and inches.
Warranty and Support
This product comes with a one-year manufacturer's warranty. For warranty claims or support, please contact the seller or manufacturer directly. Additionally, a 30-day money-back guarantee or free replacement is offered.