WORX WG322 20V Power Share 10" Cordless Chainsaw Instruction Manual

Introduction

This manual provides essential information for the safe and effective operation, maintenance, and care of your WORX WG322 20V Power Share 10" Cordless Chainsaw. Please read all instructions carefully before use and retain this manual for future reference.

Figure 1: The WORX WG322 10-inch cordless chainsaw, showcasing its compact design.

Safety Information

Operating a chainsaw requires strict adherence to safety guidelines to prevent injury. Always wear appropriate personal protective equipment (PPE) including safety glasses, gloves, hearing protection, and sturdy footwear. Ensure the work area is clear of bystanders and obstacles.

• Always use two hands: Maintain a firm grip with both hands on the chainsaw handles during operation.
• Check chain tension: Ensure the chain is properly tensioned before each use.
• Proper lubrication: Always ensure the oil tank is filled with chain oil before operating the chainsaw. Run the chain for a few seconds without cutting to ensure proper lubrication.
• Secure work piece: Ensure the material you are cutting is stable and cannot shift unexpectedly.
• Avoid kickback: Be aware of the chainsaw's tip and avoid contact with hard objects or the ground to prevent sudden kickback.

What's Included

Your WORX WG322 package typically includes the following components:

• 10" Chainsaw Unit
• 20V Battery (1 included)
• Battery Charger
• Blade Protection Cover

Figure 2: Visual representation of the items included in the WORX WG322 package.

Setup

Follow these steps to prepare your chainsaw for first use:

1. Charge the Battery: Insert the 20V battery into the provided charger and plug it into a power outlet. Allow the battery to fully charge before initial use.
2. Install the Battery: Slide the fully charged battery into the battery compartment on the chainsaw until it clicks securely into place.
3. Fill Oil Tank: Locate the oil tank cap and remove it. Carefully fill the tank with appropriate chain oil (sold separately). Ensure the cap is tightened securely to prevent leakage.
4. Check Chain Tension: The chainsaw features an automatic, tool-free chain tension system. Verify the chain is properly tensioned by checking for slight give when pulled away from the bar.

Figure 3: Key features for easy setup and maintenance, including auto-lubrication and tool-less chain adjustment.

Operating Instructions

Before operating, ensure all safety precautions are understood and followed. The chainsaw is designed for fast, clean cuts with minimal effort.

1. Starting the Chainsaw: Engage the safety switch and then press the trigger to start the chain.
2. Cutting: Position the chainsaw firmly against the material to be cut. Apply steady, even pressure. The 12.5 ft/s chain speed and auto-tension system ensure smooth, efficient cuts.
3. Power Share System: This chainsaw is part of the WORX Power Share family, meaning its 20V battery is interchangeable with over 75+ other WORX 20V, 40V, and 80V tools.

Figure 4: Chainsaw in action, cutting through wood with ease.

Operational Videos

Maintenance

Regular maintenance ensures the longevity and optimal performance of your chainsaw.

• Chain Lubrication: The automatic chain lubrication system ensures smoother cuts and extends tool life. Monitor the oil level indicator and refill as needed.
• Cleaning: After each use, clean sawdust and debris from the chain, bar, and motor housing.
• Chain Tension: Periodically check and adjust chain tension using the tool-free system.
• Oil Cap Security: Ensure the oil tank cap is always tightly secured to prevent oil leakage, especially when storing the chainsaw on its side.

Figure 5: Auto-tension and auto-lubrication systems simplify maintenance.

Maintenance Video

Troubleshooting

If you encounter issues with your chainsaw, consider the following common solutions:

• Chainsaw not starting: Ensure the battery is fully charged and properly inserted. Check that the safety switch is disengaged.
• Poor cutting performance: Verify the chain is sharp and properly tensioned. Ensure the oil tank is filled and the automatic lubrication system is functioning.
• Oil leakage: Confirm the oil tank cap is securely tightened. Store the chainsaw upright when not in use to minimize potential leaks.

Specifications

Warranty and Support

Your WORX WG322 20V Power Share 10" Cordless Chainsaw comes with a 3-Year Limited Warranty for the tool. For battery-related issues, a separate warranty may apply. For detailed warranty information, troubleshooting assistance, or to purchase replacement parts, please visit the official WORX website or contact customer support.

You can also visit the WORX Store on Amazon for additional products and support.