Introduction
This manual provides essential information for the proper use and care of your Panasonic RP-HT161-K Wired Over-Ear Headphones. Please read these instructions thoroughly before using the product to ensure optimal performance and longevity.
Image: Panasonic RP-HT161-K Over-Ear Headphones, black, showing the full design with earcups and headband.
Package Contents
Verify that all items are present in the package:
- Panasonic RP-HT161-K Over-Ear Headphones
Image: Retail packaging for the Panasonic RP-HT161-K headphones, displaying the product image and model number.
Setup
Follow these steps to set up your headphones for first use:
- Adjust the Headband: Gently extend or retract the headband to fit comfortably over your head. The earcups should fully cover your ears.
- Connect the Audio Cable: Insert the 3.5mm audio jack into the headphone port of your audio device (e.g., smartphone, laptop, tablet, TV).
Image: Close-up of a 3.5mm audio jack, illustrating the standard connector for these headphones and compatible devices.
Note: An adapter may be required for devices without a 3.5mm audio output. Adapters are not included.
Operating Instructions
These headphones are designed for straightforward audio playback. There are no integrated controls on the headphones themselves.
- Volume Control: Adjust the volume directly on your connected audio device.
- Audio Playback: Control playback (play, pause, skip) using your connected audio device.
- Comfort: The plush-padded earpads are designed for extended listening comfort. Ensure the earcups are positioned correctly over your ears for optimal sound isolation and comfort.
Image: Diagram highlighting key features of the Panasonic RP-HT161-K headphones, including balanced sound, 30mm drivers, padded earpads, and the 6.5 ft cord.
Maintenance and Care
Proper maintenance ensures the longevity and performance of your headphones:
- Cleaning:
- Wipe the exterior surfaces of the headphones with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or strong detergents.
- Avoid getting moisture into the earcup grilles or the 3.5mm jack.
- Storage:
- Store headphones in a clean, dry place away from extreme temperatures and direct sunlight.
- Avoid tangling the cord. Gently coil it for storage.
- Handling:
- Do not pull on the cord to disconnect the headphones from a device; always grasp the plug.
- Avoid dropping or subjecting the headphones to strong impacts.
Troubleshooting
If you encounter issues with your headphones, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or low volume |
|
|
| Distorted sound |
|
|
| Headphones are uncomfortable |
|
|
If the problem persists after trying these solutions, please contact Panasonic customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | RP-HT161-K |
| Brand | Panasonic |
| Ear Placement | Over-Ear |
| Connectivity Technology | Wired |
| Headphones Jack | 3.5 mm Jack |
| Audio Driver Size | 30 Millimeters |
| Frequency Range | 10 Hz–27,000 Hz |
| Impedance | 32 Ohm |
| Sensitivity | 98 dB |
| Noise Control | Passive Noise Cancellation |
| Cable Length | 6.5 Feet |
| Item Weight | 10.2 ounces |
| Special Feature | Bass Boost, Lightweight |
| Compatible Devices | Android, iOS (via 3.5mm jack) |
| Recommended Uses | Gaming, Music, Movies |
Warranty and Support
For warranty information and customer support, please refer to the official Panasonic website or the documentation included with your purchase. Specific warranty terms may vary by region and retailer.
Panasonic Customer Support:
- Visit the official Panasonic website for support resources, FAQs, and contact information.
- Keep your purchase receipt for warranty claims.
