Kiven Wall Lamp BD0208 User Manual

Introduction

This manual provides instructions for the safe installation, operation, and maintenance of your Kiven BD0208 1-Light Plug-in Wall Sconce. Please read this manual thoroughly before installation and retain it for future reference.

The Kiven BD0208 is a plug-in wall lamp featuring a matte black finish and a chrome gooseneck design, suitable for indoor use. It includes a UL Listed bulb and a 6-foot black cord with a push-button switch.

Image: Four different views of the Kiven Wall Lamp BD0208, showcasing its matte black conical shade, brass-colored socket, and curved gooseneck arm with a wall-mounted base.

1. Setup and Installation

Safety First: Always ensure the power source is disconnected before attempting any installation or maintenance. If you are unsure about connecting electrical cables safely, consult a professional electrician.

1.1 Unpacking

• Carefully remove all components from the packaging.
• Verify that all included components are present: 1 lamp (with plug-in switch cord), mounting screws, wire holder, and light bulb.
• Inspect the lamp for any damage during transit. Do not install if damaged.

1.2 Mounting the Lamp

1. Choose a suitable indoor location for wall mounting. Ensure the surface can support the lamp's weight (approximately 1.5 kg).
2. Mark the desired position for the wall mount base.
3. Drill pilot holes if necessary, then secure the lamp's wall mount base to the wall using the provided screws.
4. Ensure the lamp is firmly attached to prevent accidental detachment.

Image: Kiven Wall Lamp BD0208 with dimensions. The image shows the lamp with measurements: 10cm for the wall mount diameter, 20cm for the shade width, and 25cm for the total height from the wall mount to the top of the gooseneck curve.

1.3 Bulb Installation

• Carefully screw the included light bulb into the lamp's socket. Do not overtighten.
• The lamp is designed for incandescent bulbs and operates at 110-240V.

Image: Close-up view of the Kiven Wall Lamp's brass-colored socket and matte black conical shade, showing the connection point and the bulb opening.

1.4 Power Connection

• Plug the 6-foot power cord into a standard 110V-240V wall outlet.
• Use the provided wire holder to manage the cord neatly along the wall, if desired.

2. Operating Instructions

The Kiven BD0208 wall lamp is simple to operate.

• To turn the lamp ON, press the push-button switch located on the power cord.
• To turn the lamp OFF, press the push-button switch again.

Note: This lamp is not dimmable and operates as a simple ON/OFF fixture.

3. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Kiven wall lamp.

3.1 Cleaning

• Always unplug the lamp before cleaning.
• Wipe the lamp's metal surfaces with a soft, dry cloth.
• For stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth.
• Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.

3.2 Bulb Replacement

• Ensure the lamp is unplugged and the bulb has cooled completely before attempting replacement.
• Unscrew the old bulb counter-clockwise.
• Screw in a new incandescent bulb (110-240V) clockwise until snug. Do not overtighten.

4. Troubleshooting

If you encounter issues with your Kiven wall lamp, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact customer support.

5. Specifications

6. Warranty and Support

For any questions regarding installation, electrical issues, or product support, please contact Kiven customer service. While specific warranty details are not provided in this manual, Kiven is committed to assisting customers with their products.

Refer to your purchase documentation or the retailer's website for specific warranty terms applicable to your region.

Contact: Please refer to the seller's contact information on the platform where the product was purchased for direct support.