Teac LPR660USBPB User Manual

Introduction

Thank you for purchasing the Teac LPR660USBPB LP-Cassette to CD Recorder/USB Home Theater Receiver. This versatile audio system allows you to enjoy and digitize your favorite music from various sources, including vinyl records, cassette tapes, and radio. It also features a CD recorder to transfer your analog music to digital CD-R/RW discs and a USB audio output for PC connectivity.

Key features include:

• 3-speed Turntable (33-1/3, 45, 78rpm) with Auto return
• Built-in Cassette Player
• CD-R/RW Recording from Phono, Tape, Tuner, AUX
• AM/FM Tuner
• USB Audio Out from Phono, CD, Tape, Tuner, AUX to PC
• Built-in Speakers
• Rec Level Control for Analog Source Recording

Image: The Teac LPR660USBPB unit, showcasing its turntable, cassette deck, CD player/recorder, and control panel with built-in speakers. The unit is black with a clear dust cover over the turntable.

Setup

Unpacking and Placement

• Carefully remove the unit from its packaging.
• Place the unit on a flat, stable, and level surface away from direct sunlight, heat sources, and excessive dust or moisture.
• Ensure adequate ventilation around the unit.

What's in the Box

• Teac LPR660USBPB Main Unit
• USB Cable

Power Connection

Connect the AC power cord to the unit's power input and then to a standard wall outlet.

Antenna Connection

For optimal AM/FM reception, connect the supplied antennas to their respective jacks on the rear of the unit.

USB Connection to PC

To use the USB audio output feature, connect the supplied USB cable from the unit's USB port to an available USB port on your computer. Ensure your computer meets the supported operating system requirements (Windows 7, 8, 8.1, 10; Mac OS X Snow Leopard (10.6) to macOS Sierra (10.12)).

Operating Instructions

General Operation

• Power On/Off: Press the Power button to turn the unit on or off.
• Volume Control: Use the VOLUME knob to adjust the overall output volume.
• Source Selection: Use the FUNCTION buttons (PHONO/TAPE/AUX, CD, FM/AM) to select the desired audio source.

Turntable Operation

1. Open the dust cover.
2. Place a record on the turntable platter.
3. Select the appropriate speed (33-1/3, 45, or 78rpm) using the speed selector switch. For 45rpm records, place the included adapter on the spindle.
4. Gently lift the tonearm and position the stylus over the desired track on the record.
5. Lower the tonearm slowly onto the record. Playback will begin.
6. At the end of the record, the auto-return feature will lift the tonearm and return it to its rest position.

Cassette Player Operation

1. Insert a cassette tape into the cassette deck.
2. Press the PLAY button to start playback.
3. Use the FAST FORWARD and REWIND buttons to navigate the tape.
4. Press the STOP button to stop playback. Press the EJECT button to remove the tape.

CD Player/Recorder Operation

1. Press the OPEN/CLOSE button to open the CD tray.
2. Place a CD (audio CD, CD-R, or CD-RW) onto the tray with the label side up.
3. Press the OPEN/CLOSE button again to close the tray.
4. Press the PLAY/PAUSE button to start or pause playback.
5. Use the SKIP buttons to navigate between tracks.
6. Recording to CD-R/RW:
   • Insert a blank CD-R or CD-RW disc.
   • Select the desired input source (Phono, Tape, Tuner, or AUX).
   • Adjust the REC LEVEL control to prevent distortion during recording.
   • Press the RECORD button to begin recording. Press it again to stop.
   • Finalize the CD-R/RW disc after recording to make it playable on other CD players. Refer to the on-screen prompts or detailed manual for finalization steps.
7. CD Playback Modes: The unit supports Repeat (1/ALL), Shuffle, and 32-track Program Play. Refer to the display and control buttons for these functions.

AM/FM Tuner Operation

1. Press the FM/AM button to select the radio band.
2. Use the TUNING knobs or buttons to manually tune to a station.
3. For automatic tuning, press and hold the TUNING button.
4. To preset stations, tune to the desired station, then follow the instructions on the display to save it to a preset number.

USB Audio Out to PC

With the unit connected to your PC via USB, you can record audio from the Phono, CD, Tape, Tuner, or AUX sources directly to your computer. Use audio recording software on your PC to capture the audio stream from the Teac LPR660USBPB.

Maintenance

Cleaning the Unit

• Always unplug the unit from the power outlet before cleaning.
• Wipe the exterior surfaces with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly.
• Do not use abrasive cleaners, waxes, or solvents.

Turntable and Stylus Care

• Keep the dust cover closed when not in use to prevent dust accumulation.
• Clean the stylus regularly with a soft brush designed for stylus cleaning, brushing from back to front.
• Replace the stylus when sound quality deteriorates or after approximately 500 hours of use.

Cassette Deck Care

• Periodically clean the tape heads and pinch rollers with a cotton swab lightly dampened with isopropyl alcohol.
• Demagnetize the tape heads occasionally to maintain sound quality.

CD Drive Care

• Use a soft, lint-free cloth to clean the CD tray.
• Do not insert damaged or warped discs into the CD drive.

Troubleshooting

If you experience issues with your Teac LPR660USBPB, please refer to the following common problems and solutions before seeking professional service.

• No Power:
  • Ensure the power cord is securely plugged into the unit and the wall outlet.
  • Check if the wall outlet is functioning by plugging in another device.
• No Sound:
  • Check the volume level.
  • Ensure the correct audio source is selected (PHONO/TAPE/AUX, CD, FM/AM).
  • If using headphones, ensure they are properly connected and the volume is adjusted.
• Turntable Not Spinning / Poor Sound:
  • Ensure the speed setting matches the record.
  • Check if the stylus is clean and properly seated.
  • Verify the record is clean and free of debris.
• CD Playback Issues:
  • Ensure the CD is clean and free of scratches or smudges.
  • Try a different CD to confirm the issue is not with the disc.
• Recording to CD Fails:
  • Ensure you are using a blank CD-R or CD-RW disc.
  • Check the REC LEVEL setting to ensure it's not too low or too high.
  • Ensure the disc is finalized after recording if you want to play it on other devices.

Specifications

Warranty and Support

For detailed warranty information, please refer to the warranty card included with your product or visit the official Teac website. If you require technical assistance or have questions not covered in this manual, please contact Teac customer support.

You can often find support contact information on the manufacturer's official website or within the product packaging.