SportDOG Brand Contain + Train System User Manual

1. Setup

The SportDOG Brand Contain + Train System provides a comprehensive solution for keeping your dog safely within designated boundaries. Proper setup is crucial for effective operation.

1.1 System Components

• Containment Transmitter: The central unit that generates the boundary signal.
• 1,000 Feet of 20-Gauge Wire: Used to create the boundary loop.
• 100 Boundary Flags: Visual aids for training your dog to recognize the boundary.
• Collar Receiver: Worn by your dog, it receives the signal from the boundary wire and remote.
• Remote Transmitter: Used for remote training commands (tone, vibrate, static stimulation).
• Charging Adaptors: For recharging the collar and remote.
• Contact Points: Standard and Long, for different coat lengths.
• Test Light Tool: To verify static stimulation.

Image: Overview of the SportDOG Contain + Train System components, including the main transmitter unit, rolls of boundary wire, boundary flags, the dog collar receiver, and the remote training transmitter.

1.2 Installing the Boundary Wire

Plan your desired containment area carefully. The system can cover up to 1 1/3 acres with the included wire and is expandable up to 100 acres with additional wire. Bury the boundary wire approximately 1-3 inches deep around the perimeter of your desired containment area. Ensure the wire forms a continuous loop connected back to the Containment Transmitter.

Image: A visual representation of the system's capability to contain a dog within a large area, up to 100 acres, with a table showing wire length requirements for various yard sizes.

1.3 Customizable Layouts

The system allows for various customizable layouts to suit your property's needs. You can create simple perimeters, double loops for lake access, or protect specific areas like pools and gardens by running the wire around them.

Image: Examples of flexible boundary configurations, including a simple perimeter, a double loop for water access, and exclusion zones around landscaping or pools.

1.4 Initial System Activation

Connect the Containment Transmitter to a standard electrical outlet. The 'Power' and 'Loop' indicator lights should illuminate, confirming the system is active and the boundary loop is complete. Adjust the range setting on the transmitter to control the width of the warning zone.

Video: An official SportDOG video demonstrating the overall setup and functionality of the In-Ground Fence Contain + Train system, highlighting its key features and benefits for pet owners.

2. Operating Your System

The Contain + Train System offers versatile operating modes and stimulation options to effectively manage and train your dog.

2.1 Collar Receiver Functions

The waterproof collar receiver fits dogs 10 lbs. or larger and features an OLED display for easy programming. It offers Tone (beep), Vibration (Buzz), and seven levels of static stimulation. The collar is rechargeable and designed for durability.

Image: Detailed view of the collar receiver, highlighting its size suitability, display, and various stimulation options (tone, vibrate, 7 levels of static stimulation), along with its waterproof and rechargeable features.

2.2 Remote Transmitter Functions

The remote transmitter allows you to control the collar with Tone, Continuous Static Stimulation, and Momentary Static Stimulation. It also features an Increase/Decrease Intensity dial and a V/T (Vibe/Tone) button for quick adjustments. The remote is also rechargeable.

Image: A detailed look at the remote transmitter, illustrating its controls for tone, continuous and momentary static stimulation, intensity adjustment, and charging port. It also highlights its waterproof and multi-dog training capabilities.

2.3 Operating Modes

The system offers three distinct operating modes for flexible training and containment:

• Containment & Training Mode: The collar responds to both the fence boundary and remote operations, allowing you to train your dog while keeping them confined.
• Containment Mode: The collar responds only to the fence boundary, solely for keeping your dog confined.
• Training Only: The collar responds only to the remote, enabling you to train your dog anywhere, outside the boundary.

Image: Visual explanation of the three collar modes: combined containment and training, containment only, and training only, illustrating the versatility of the system.

3. Maintenance and Care

Proper maintenance ensures the longevity and optimal performance of your SportDOG Contain + Train System.

3.1 Charging Your System

Both the collar receiver and remote transmitter are rechargeable. For the first charge and all subsequent charges, ensure they are fully charged for approximately 2 hours. The battery indicator light will turn green when charging is complete. During charging, keep the units in an open, well-ventilated area.

Video: An official SportDOG video detailing the process of charging both the collar receiver and the remote transmitter for the Contain + Train System, including indicator light meanings.

3.2 Long-Term Storage

If storing the system for long periods, periodically give the batteries a full charge. This should be done every 3 to 4 months to maintain battery health.

4. Troubleshooting

This section addresses common issues you might encounter with your Contain + Train System.

4.1 Wire Break Alarm

The Containment Transmitter is equipped with a wire break alarm. If the boundary wire is cut or disconnected, the 'Loop' indicator light will turn off and an audible alarm will sound. Inspect your boundary wire for any visible damage or disconnections and repair as necessary.

4.2 Lightning Protector

The system includes a built-in lightning protector to safeguard against power surges. In the event of a severe electrical storm, it is recommended to unplug the Containment Transmitter from the wall outlet.

4.3 Dog Not Responding to Boundary

• Ensure the collar receiver is properly fitted and the contact points are making good contact with your dog's skin.
• Verify the collar is charged and turned on.
• Check the range setting on the Containment Transmitter; increase if necessary.
• Retest the boundary with the test light tool to ensure the signal is active.
• Review training procedures to reinforce boundary awareness.

5. Product Specifications

6. Warranty and Customer Support

Your SportDOG Brand Contain + Train System is backed by a 2-Year Manufacturer's Warranty, ensuring quality and reliability.

For any questions, troubleshooting assistance, or warranty claims, please contact our US-based customer care center. You can also refer to the comprehensive User Manual (PDF) for detailed information.