Godox SL-100 LED Video Light User Manual

1. Introduction

This manual provides detailed instructions for the safe and effective operation of your Godox SL-100 LED Video Light. The SL-100 is a daylight-balanced, 5600K COB LED light designed for high-quality video and photography applications. It offers precise brightness control and is compatible with Bowens S-mount accessories.

Please read this manual thoroughly before using the product to ensure proper function and to prevent damage.

2. Safety Information

• Do not disassemble or modify the product. Unauthorized repairs will void the warranty.
• Keep the product dry. Do not handle with wet hands or immerse in water.
• Do not operate in the presence of flammable gases or liquids.
• Ensure the power cord is securely connected and not damaged. A loose connection may lead to power loss.
• Unplug the power cord before cleaning or when not in use for extended periods.
• Do not block the ventilation openings. Adequate airflow is essential for heat dissipation.
• Avoid direct eye exposure to the LED light.
• This product is not water resistant. Avoid exposure to rain or moisture.

3. Package Contents

Verify that all items are included in your package:

• Godox SL-100 LED Video Light
• Power Cord
• Standard Reflector
• User Manual (this document)
• Note: The RC-A5 remote control is not included and must be purchased separately.

4. Product Overview

Familiarize yourself with the components of your Godox SL-100 LED Video Light.

Figure 4.1: Front-side view of the Godox SL-100 LED Video Light, showing the COB LED and heat sink fins.

Figure 4.2: Rear view of the Godox SL-100 LED Video Light, highlighting the LCD display, control dial, power switch, and power input.

• COB LED: High-power daylight-balanced LED chip.
• Heat Sink: Metal fins designed for efficient heat dissipation.
• Bowens S-Mount: Standard mount for attaching light modifiers like reflectors and softboxes.
• Mounting Bracket: Adjustable bracket for attaching the light to a light stand.
• LCD Display: Shows current settings such as brightness, channel, and group.
• Control Dial: Used to adjust brightness (10-100%) and navigate menu options.
• Power Switch: On/Off toggle for the unit.
• Power Input: AC 100-240V 50/60Hz input for the power cord.
• CH/GRP Button: Button to switch between channel and group settings.
• SET Button: Button to confirm selections or enter settings mode.

5. Setup

1. Attach to a Light Stand:

   Secure the Godox SL-100 onto a compatible light stand using the mounting bracket. Ensure the locking knob is tightened to prevent accidental movement.

2. Connect Power:

   Insert the power cord into the power input port on the rear of the light. Connect the other end of the power cord to a suitable AC power outlet (AC 100-240V 50/60Hz). Ensure the connection is firm.

3. Attach Light Modifier (Optional):

   To attach the included standard reflector or other Bowens S-mount accessories (e.g., softbox), align the modifier with the Bowens S-mount on the front of the light. Rotate clockwise until it clicks into place. To remove, press the release button and rotate counter-clockwise.

   

   Figure 5.1: Godox SL-100 with the standard reflector attached.

6. Operating Instructions

1. Power On/Off:

   Flip the red power switch on the rear of the unit to the "I" position to turn the light on. Flip it to the "O" position to turn it off.
2. Adjusting Brightness:

   Once powered on, rotate the control dial to adjust the light intensity. The brightness can be adjusted from 10% to 100%. The current brightness level will be displayed on the LCD screen.

   

   Figure 6.1: Close-up of the LCD display showing operational settings.

3. Setting Channel and Group (Optional, for remote control):

   If using an optional wireless remote control (e.g., RC-A5), you can set the channel (CH) and group (GRP) of the light to match your remote. Press the "CH/GRP" button to toggle between channel and group selection. Rotate the control dial to change the values. Press "SET" to confirm.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the light body. For the LED and protective cover, use a lens cleaning cloth. Do not use abrasive cleaners or solvents.
• Storage: Store the light in a cool, dry place away from direct sunlight and excessive humidity.
• Ventilation: Ensure the ventilation openings are clear of dust and debris to maintain optimal cooling performance.
• Temperature Control: The unit has a built-in fan and temperature control function. Allow the fan to operate as needed to prevent overheating. The safe operating temperature is less than or equal to 70°C.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information and technical support, please contact Godox customer service or visit the official Godox website. Keep your purchase receipt as proof of purchase for warranty claims.

Godox Official Website: www.godox.com

For additional support or inquiries, refer to the contact information provided with your product or on the manufacturer's website.