Martin Svensson Home 91001

Martin Svensson Home Elegant TV Stand (Model 91001) Instruction Manual

For Antique Teal-Green, 63" W x 35" H

1. Introduction

Thank you for choosing the Martin Svensson Home Elegant TV Stand. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

2. Important Safety Information

  • Weight Limit: Do not exceed the maximum weight capacity of 200 pounds for the top surface.
  • Assembly: Assembly requires two people. Ensure all parts are securely fastened before use.
  • Anti-Tip Kit: An anti-tip kit is included. It is highly recommended to install this kit to prevent accidental tipping, especially in homes with children or pets.
  • Placement: Place the TV stand on a flat, level surface.
  • Ventilation: Ensure adequate ventilation around electronic devices stored within the stand.
  • Cleaning: Wipe with a damp cloth. Avoid harsh chemicals.

3. Parts List

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

  • Assembly Parts of the TV Stand
  • Legs (6 pcs)
  • Doors (4 pcs)
  • Door Handles (4 sets)
  • Adjustable Shelves (2 pcs)
  • Anti-Tip Set
  • Hardware (Screws, etc.)

4. Setup and Assembly Instructions

This TV stand features a no-tool assembly design for most major components, requiring only a Phillips screwdriver for certain parts like door handles. It is recommended to have two people for assembly due to the size and weight of the components.

4.1 Unpacking

Carefully unpack all components from the box. Lay them out on a soft, clean surface to prevent scratches. Verify all parts against the parts list.

4.2 Main Body Assembly

Follow the pictorial instructions provided with your product. The main body components are designed to interlock. Ensure each piece is aligned correctly and firmly pressed into place until the locking mechanisms engage. Some locking bits may require a small mallet to fully secure.

4.3 Attaching Legs

Screw the six bun feet and two square feet into the pre-installed metal sleeves on the base of the stand. Ensure they are tightened securely.

4.4 Installing Doors and Handles

The doors come pre-assembled with tempered glass and hinges. Attach the decorative door handles using a Phillips screwdriver. Note that the handle pieces may have an 'upside' and 'downside' to ensure proper alignment.

Front view of the assembled Martin Svensson Home Elegant TV Stand in Antique Teal-green, showcasing the four glass-paneled doors with decorative handles.

Image: Front view of the assembled TV stand, highlighting the design and door handles.

4.5 Installing Adjustable Shelves

Insert the adjustable shelves into the desired positions within the cabinets. The shelves are removable, allowing for flexible configurations to accommodate various audio, video, and gaming gear.

Back view of the Martin Svensson Home Elegant TV Stand, showing the two vertical cutouts for cable management.

Image: Back view of the TV stand, illustrating the cable management cutouts.

4.6 Anti-Tip Kit Installation

Secure the TV stand to a wall using the provided anti-tip kit. Follow the specific instructions included with the kit for proper installation to prevent tipping hazards.

5. Operation

The Martin Svensson Home Elegant TV Stand is designed to accommodate flat-panel televisions up to 65 inches. The spacious cabinets and adjustable shelves provide ample storage for media devices, gaming consoles, and other accessories. Vertical cutouts in the back panel allow for seamless wire management, keeping cables tidy and organized.

Dimensions of the Martin Svensson Home Elegant TV Stand: 18 inches deep, 63 inches wide, and 35 inches high.

Image: Product dimensions for planning placement.

6. Maintenance and Care

  • Cleaning: For general cleaning, wipe the surfaces with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or polishes that may damage the finish.
  • Spills: Immediately wipe up any spills to prevent staining or damage to the wood.
  • Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration.
  • Heat: Do not place hot items directly on the surface. Use coasters or protective pads.
  • Inspections: Periodically check all fasteners and connections to ensure they remain tight. Re-tighten if necessary.

7. Troubleshooting

ProblemPossible CauseSolution
Stand is wobbly or unstable.Uneven floor; loose connections; improperly installed legs.Ensure the stand is on a level surface. Check and tighten all screws and leg connections. Verify legs are fully screwed into their sleeves.
Doors do not close properly.Misaligned hinges; obstruction; loose door handles.Check hinge alignment and adjust if necessary. Ensure nothing is blocking the door's path. Tighten door handles.
Scratches or minor damage to finish.Normal wear and tear; accidental impact.For minor scratches, touch-up paint may be available from the manufacturer or a suitable furniture repair kit can be used.

8. Product Specifications

  • Brand: Martin Svensson Home
  • Model Name: Elegant
  • Model Number: 91001
  • Color: Antique Teal-green
  • Product Dimensions: 18"D x 63"W x 35"H
  • Item Weight: 126 Pounds
  • Weight Limit: 200 Pounds (top surface)
  • Material: Engineered Wood, Glass, Pine
  • Finish Type: Painted
  • Number of Shelves: 2 (adjustable)
  • Number of Doors: 4 (tempered glass)
  • Special Feature: Corded (cable management cutouts)
  • Assembly Required: Yes (minimal tools)

9. Warranty and Customer Support

This product comes with a 1-year limited manufacturer warranty. For warranty claims, missing parts, or any other inquiries, please contact Martin Svensson Home customer support. Refer to your purchase documentation for specific contact details or visit the Martin Svensson Home Store on Amazon.

Customer Support is available for assistance. Please have your model number (91001) and purchase date ready when contacting support.

© 2024 Martin Svensson Home. All rights reserved.

Related Documents - 91001

Preview Assembly Instructions for Martin Svensson Home Fluted Door Corner Entertainment Center
Detailed assembly instructions for the Martin Svensson Home 909220 Rustic Oak and 909226 Smoked Oak Fluted Door Corner Entertainment Centers. Includes parts list, step-by-step guide, and replacement part form.
Preview Martin Svensson Home Chairside End Table with USBC Assembly Instructions & Replacement Parts
Comprehensive assembly instructions for the Martin Svensson Home Chairside End Table with USBC (Models 860174, 860176, 860177), including a replacement part request form.
Preview Assembly Instructions: Martin Svensson Home TV Stand (Models 90920, 90921, 90925, 90926)
Step-by-step assembly instructions for Martin Svensson Home TV Stand models 90920, 90921, 90925, and 90926. Includes parts list, hardware requirements, and support contact information.
Preview Assembly Instructions for 8706764 Oval End Table - Prairie Oak
Detailed assembly instructions for the 8706764 Oval End Table in Prairie Oak finish by Martin Svensson Home. Includes parts list, hardware, step-by-step guidance, and a replacement part request form.
Preview Strand NEO Lighting Control Console User's Manual - Comprehensive Guide
User's Manual for the Strand NEO Lighting Control Console. Learn about installation, operation, software features, DMX control, and advanced programming for professional lighting applications. Includes details on NEO PC, Playback Wings, and Submaster Wings.
Preview HR HiPower AGM Car Battery 12V 50Ah - Instruction Manual and Data Sheet
Technical specifications, maintenance, and installation guide for the HR HiPower AGM 12V 50Ah car battery. Learn about charging, safety, and proper handling.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.