Fossil FS5377

Fossil Analog Multi-Colour Dial Men's Watch FS5377

User Instruction Manual

1. Introduction

This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Fossil Analog Multi-Colour Dial Men's Watch, model FS5377. Please read this manual carefully to ensure proper use and care of your timepiece.

The Fossil FS5377 is a quartz movement watch featuring a round, multi-colour dial and a durable stainless steel band. It is designed for everyday wear with a water resistance rating of 50 meters.

2. Setup

2.1 Initial Activation

To activate your watch, locate the small plastic stopper around the crown (the knob on the side of the watch case). Gently pull out and remove this plastic piece. Push the crown back into its normal position to start the watch movement.

Side view of Fossil FS5377 watch showing the crown

Image: Side view of the watch, highlighting the crown for initial activation and time setting.

2.2 Setting the Time

  1. Pull the crown out to the first position.
  2. Rotate the crown clockwise or counter-clockwise to set the hour and minute hands to the correct time.
  3. Once the time is set, push the crown back into its normal position to engage the movement and start the watch.

2.3 Adjusting the Band

The stainless steel band can be adjusted for a comfortable fit. This typically involves removing or adding links. It is recommended to have this adjustment performed by a professional watchmaker or jeweler to prevent damage to the band or clasp mechanism.

Fossil FS5377 watch on a wrist

Image: The Fossil FS5377 watch worn on a wrist, demonstrating how the band fits.

3. Operating Your Watch

3.1 Timekeeping

Your Fossil FS5377 watch is an analog timepiece that displays hours, minutes, and seconds. Once the time is set, the quartz movement ensures accurate timekeeping.

Front view of Fossil FS5377 watch with multi-colour dial

Image: Front view of the Fossil FS5377 watch, showcasing the multi-colour dial and hands.

3.2 Water Resistance

This watch has a water resistance rating of 50 meters (5 ATM). This means it is suitable for short periods of recreational swimming, showering, or exposure to rain and splashes. It is not suitable for diving, snorkeling, or high-impact water sports. Avoid operating the crown while the watch is wet or submerged to prevent water intrusion.

4. Maintenance and Care

4.1 Cleaning

  • Case and Crystal: Wipe the watch case and crystal with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and drying thoroughly.
  • Stainless Steel Band: Clean the stainless steel band with a soft brush and mild soapy water to remove dirt and debris from the links. Rinse thoroughly and dry immediately to prevent water spots.

4.2 Battery Replacement

The watch is powered by one CR2 battery. When the watch stops or the time becomes inaccurate, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.

4.3 General Care

  • Avoid exposing your watch to extreme temperatures (hot or cold) or sudden temperature changes.
  • Keep the watch away from strong magnetic fields, as these can affect the accuracy of the quartz movement.
  • Avoid direct contact with solvents, detergents, perfumes, and cosmetics, as these can damage the case, band, or seals.
  • Store your watch in a dry, safe place when not in use, preferably in its original packaging or a watch box.

5. Troubleshooting

ProblemPossible CauseSolution
Watch not runningPlastic stopper still in crown; depleted battery; crown not pushed in.Remove plastic stopper; push crown fully in; replace battery.
Time is inaccurateDepleted battery; exposure to strong magnetic fields; internal movement issue.Replace battery; keep away from magnets; contact service if issue persists.
Condensation inside crystalWater intrusion due to damaged seal or improper crown operation.Immediately contact an authorized service center. Do not attempt to open the watch.

6. Specifications

FeatureDetail
Model NumberFS5377
BrandFossil
Movement TypeQuartz
Display TypeAnalog
Dial ColorMulti-Colour
Case MaterialStainless Steel
Case ShapeRound
Case Diameter44 Millimeters
Band MaterialStainless Steel
Band ColorGunmetal
Water Resistance Depth50 Metres (5 ATM)
Battery Type1 CR2 (included)
Item Weight249 Grams
Product Dimensions7.2 x 9.2 x 9 Centimeters
Back view of Fossil FS5377 watch showing case back details

Image: Rear view of the watch, displaying the stainless steel case back with model and water resistance markings.

7. Warranty Information

Your Fossil FS5377 watch comes with a 2-year manufacturer warranty covering manufacturing defects. This warranty is provided by the manufacturer, FOSSIL INDIA PVT LTD. Please retain your proof of purchase for warranty claims.

The warranty typically covers defects in materials and workmanship under normal use. It does not cover damage resulting from accidents, improper use, unauthorized repairs, normal wear and tear, or battery replacement.

8. Customer Support

For further assistance, warranty claims, or service inquiries regarding your Fossil FS5377 watch, please contact Fossil customer service. You can find contact information and additional resources on the official Fossil website or by visiting an authorized Fossil retailer.

For more information about Fossil products, you may visit the official Fossil Store on Amazon.

Fossil watch tin packaging box

Image: The Fossil watch tin packaging, which often contains warranty information and user guides.

© 2023 Fossil. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.