Sammy's 8058957-25 Vertically Threaded Rod Anchor User Manual

1. Product Overview

The Sammy's 8058957-25 Rod Hanger is a specialized fastener designed to provide a secure anchor for threaded rods in concrete structures. It features a 1/4 inch female fitting on the screw head, allowing for direct attachment of threaded rods. The coarse threads ensure a strong grip in overhead or ground-level concrete bases, establishing a tight and reliable connection.

This anchor is engineered for durability and ease of use, making it an ideal solution for suspending various fixtures such as sprinklers, pipes, electrical components, and HVAC equipment from cast-in-place concrete, precast concrete, and open web joists.

Figure 1: Sammy's 8058957-25 Vertically Threaded Rod Anchors (25 Pack) with product packaging.

2. Key Features

• Vertical Application: Specifically designed for hanging threaded rods to all vertical concrete structures, including ceilings and walls.
• Economical and Efficient: Offers a more cost-effective and time-efficient alternative compared to traditional anchoring methods.
• Durable Construction: Manufactured from case-hardened, heat-treated steel with a zinc coating, ensuring ultimate quality, high strength, and excellent corrosion resistance, even in high-stress environments.
• Reduced Over-Torque: Engineered to minimize the risk of over-torque and screw failure when installed with compatible Sammy's #14 black nut driver.
• Versatile Use: Ideal for anchoring into concrete, brick, and block materials.

Figure 2: The anchor features a Blue Climaseal Coating for enhanced corrosion resistance and a 304 Stainless Steel cap for durability.

3. Specifications

Figure 3: Detailed dimensions of the Vertical Rod Anchor Super Screw, including thread screw diameter, screw head diameter, and rod diameter.

4. Installation Guide

Proper installation is crucial for the secure and reliable performance of the Sammy's Vertically Threaded Rod Anchor. Always wear appropriate safety gear, including eye protection, during installation.

Required Tools:

• Rotary Hammer Drill
• 1/4 inch Concrete Drill Bit
• Sammy's #14 Black Nut Driver (recommended for optimal installation)
• Safety Glasses

Installation Steps:

1. Step 1: Drill Pilot Hole

   Using a rotary hammer drill and a 1/4 inch concrete drill bit, drill a pilot hole into the concrete, brick, or block surface. The depth of the hole should be sufficient to accommodate the full length of the anchor's screw portion (1-3/4 inches). Ensure the hole is clean of debris.

   

   Figure 4: The first step involves drilling a 1/4 inch pre-drilled pilot hole into the concrete surface.

2. Step 2: Drive the Anchor

   Attach the Sammy's #14 Black Nut Driver to your drill. Insert the Sammy's anchor into the pre-drilled hole. Drive the anchor into the hole using the drill. The nut driver is designed with a unique spin-off feature that ensures a fast and safe installation. Continue driving until the nut driver spins free, indicating the anchor is fully seated and securely fastened.

   

   Figure 5: The anchor is quickly installed using the Sammy's Nut Driver, which features a spin-off mechanism for secure fastening.

   

   Figure 6: Example of vertical installation into concrete, showing the anchor securely holding a pipe hanger.

3. Step 3: Attach Threaded Rod

   Once the anchor is securely installed, thread your 1/4 inch threaded rod into the female fitting on the anchor head. Tighten the rod until it is snug.

Important Safety Note: Eye protection must be worn during installation to prevent injury from flying debris.

Figure 7: The Sammy's anchor is applicable for installation in Block, Brick, and Concrete, offering versatility for various construction needs.

5. Maintenance

The Sammy's 8058957-25 Vertically Threaded Rod Anchor is designed for long-term, maintenance-free performance. Its case-hardened, heat-treated steel construction with a zinc coating provides excellent corrosion resistance, minimizing the need for regular maintenance.

Periodically inspect installed anchors for any signs of damage or loosening, especially in high-vibration or high-stress environments. If any issues are observed, consult a qualified professional for assessment and potential re-installation or replacement.

6. Troubleshooting

• Anchor Not Seating Properly:

  Ensure the pilot hole is drilled to the correct diameter (1/4 inch) and depth (1-3/4 inches). The hole must be clear of dust and debris. Verify that you are using a compatible Sammy's #14 nut driver, which is designed to prevent over-torque and ensure proper seating.

• Difficulty Driving Anchor:

  Confirm that the drill is set to the appropriate setting for concrete drilling (hammer drill function). The pilot hole might be too shallow or not wide enough. Do not force the anchor; re-drill the hole if necessary.

• Anchor Spinning in Hole:

  This indicates the pilot hole may be too large or the concrete material is compromised. The anchor relies on the coarse threads gripping the concrete. If this occurs, the anchor may not provide the intended load capacity and should be removed and re-installed in a new, properly drilled location.

7. Warranty and Support

Information regarding product warranty and customer support for the Sammy's 8058957-25 Vertically Threaded Rod Anchor is not provided within this manual. For warranty details, technical assistance, or further inquiries, please refer to the official Sammy's website or contact their customer service directly through the contact information provided on the product packaging or their official channels.

You can visit the Sammy's Store on Amazon for more information: Sammy's Store