Product Overview
The Ideal Standard S454536 Contour 21 Schools Toilet Seat is designed for durability and hygiene in educational environments. Manufactured from heavy-duty polypropylene, this seat is built to withstand rigorous daily use. It is specifically designed to be compatible with Armitage Shanks Contour 21 Splash toilet bowls with a ceramic height of 355mm. This product meets BS 1254:1981 standards for WC seats.
Image 1: Top-down view of the Ideal Standard S454536 Contour 21 Schools Toilet Seat in blue.
Key Features:
- Compatible with Armitage Shanks Contour 21 Splash 355mm high bowls.
- Toilet Seat ring only (does not include lid).
- Constructed from heavy-duty polypropylene for enhanced durability.
- Available in various bright color options.
- Includes a 5-year warranty.
Setup and Installation
Proper installation ensures the stability and longevity of your toilet seat. Please follow these steps carefully.
Required Tools (Not Included):
- Screwdriver (appropriate for mounting hardware)
- Adjustable wrench (if bolts require tightening)
Installation Steps:
- Unpack Components: Carefully remove the toilet seat and any included mounting hardware from its packaging. Verify all parts are present.
- Prepare Toilet Bowl: Ensure the toilet bowl is clean and dry before installation. Locate the two mounting holes at the rear of the toilet bowl.
- Position the Seat: Place the toilet seat onto the toilet bowl, aligning the seat's hinge posts with the mounting holes on the bowl.
- Secure Mounting Hardware: Insert the mounting bolts through the hinge posts and the toilet bowl holes. From underneath the bowl, attach and hand-tighten the nuts onto the bolts.
- Adjust and Tighten: Adjust the seat position to ensure it is centered and aligned with the bowl. Once satisfied, use a screwdriver or wrench to fully tighten the mounting bolts. Do not overtighten, as this may damage the seat or bowl.
Image 2: The blue toilet seat installed on a white ceramic toilet bowl, demonstrating proper fit.
Image 3: Technical drawing illustrating the dimensions of the toilet seat for accurate measurement and compatibility.
Operating Instructions
The Ideal Standard S454536 toilet seat is designed for straightforward use.
- Usage: Use the toilet seat as a standard WC seat.
- Lowering: Always lower the seat gently to prevent damage to the seat or the toilet bowl. Avoid dropping the seat forcefully.
Image 4: The blue toilet seat shown in a closed position, highlighting its design.
Maintenance and Care
Regular cleaning and proper care will help maintain the appearance and hygiene of your toilet seat.
- Cleaning: Clean the toilet seat regularly with a soft cloth, warm water, and a mild, non-abrasive soap.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, scouring pads, strong acids, alkalis, or organic solvents, as these can damage the polypropylene surface and finish.
- Drying: After cleaning, wipe the seat dry with a soft cloth to prevent water spots.
- Check Fittings: Periodically check the mounting bolts and hinges to ensure they remain tight. Retighten if necessary to prevent the seat from shifting.
Troubleshooting
Here are solutions to common issues you might encounter.
- Seat is Loose or Shifts:
Solution: The mounting bolts may have loosened over time. Carefully lift the seat to access the bolts and tighten them with an appropriate screwdriver or wrench. Do not overtighten. - Stains on Seat Surface:
Solution: For most stains, a mild soap and water solution should suffice. For more stubborn marks, use a non-abrasive bathroom cleaner specifically designed for plastic surfaces. Always test cleaners on an inconspicuous area first. - Seat Does Not Fit Properly:
Solution: Ensure the toilet seat is compatible with your toilet bowl model. This seat is designed for Armitage Shanks Contour 21 Splash 355mm high bowls. Refer to the technical drawing in the Setup section for dimensions.
Specifications
| Attribute | Detail |
|---|---|
| Brand | Ideal Standard |
| Model Number | S454536 |
| Material | Heavy-duty Polypropylene |
| Color | Blue |
| Style | Contour |
| Shape | Oval |
| Product Dimensions | 17.32"L x 14.76"W (440mm L x 375mm W) |
| Item Weight | 1.85 pounds (0.84 kg) |
| Included Components | Toilet Seat (ring only) |
| Compatibility | Armitage Shanks Contour 21 Splash 355mm high bowls |
Warranty Information
This Ideal Standard S454536 Contour 21 Schools Toilet Seat comes with a 5-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use and service. Please retain your proof of purchase for any warranty claims. The warranty does not cover damage resulting from improper installation, misuse, abuse, or the use of abrasive cleaners.
Customer Support
For further assistance, technical support, or inquiries regarding spare parts, please contact Ideal Standard customer service. You can find contact information on the official Ideal Standard website or through your local distributor.
When contacting support, please have your product model number (S454536) and date of purchase available.
