Introduction
This user manual provides detailed instructions for the installation, operation, and maintenance of your Alcatel TEMPORIS 880 compact corded telephone. Please read this manual carefully before using the device to ensure proper functionality and to maximize its features. The TEMPORIS 880 is designed for reliable communication in various environments, offering essential features for both home and office use.
Figure 1: Front view of the Alcatel TEMPORIS 880 telephone.
The Alcatel TEMPORIS 880 is compatible with various telecommunication infrastructures, making it suitable for diverse setups:
- Analog PBX systems
- Analog Telephone Adapters (ATA)
- Routers with FXS Ports
- Public Switched Telephone Network (PSTN) lines from telecommunications operators
Figure 2: Compatibility overview for the Alcatel TEMPORIS 880, showing support for analog PBX, ATA, FXS port routers, and PSTN lines.
Setup and Installation
Follow these steps to set up your Alcatel TEMPORIS 880 telephone.
1. Package Contents
Before starting, ensure all components are present:
- Alcatel TEMPORIS 880 telephone base
- Handset
- Coiled handset cord
- Telephone line cord
- User Manual (this document)
2. Connecting the Telephone
- Connect the Handset: Plug one end of the coiled handset cord into the handset and the other end into the jack labeled with a handset icon on the side of the telephone base.
- Connect the Telephone Line: Plug one end of the telephone line cord into the jack labeled with a telephone line icon on the back of the telephone base. Plug the other end into your wall telephone jack.
Figure 3: Side view showing handset and line cord connections.
Note: The Alcatel TEMPORIS 880 is line-powered and does not require an external power adapter for basic operation. However, AAA batteries (not included) may be required for certain display functions.
3. Wall Mounting (Optional)
The TEMPORIS 880 can be wall-mounted. To do so:
- Locate the wall mounting holes on the back of the telephone base.
- Install two screws (not supplied) into the wall, spaced appropriately for the mounting holes.
- Slide the telephone onto the screws, ensuring it is securely fastened.
Figure 4: Back view of the telephone, showing wall mounting points.
Operating Instructions
Making and Receiving Calls
- To Make a Call: Lift the handset or press the Hands-Free button. Dial the desired number.
- To Receive a Call: Lift the handset or press the Hands-Free button when the phone rings.
- To End a Call: Place the handset back on the cradle or press the Hands-Free button again if in hands-free mode.
Hands-Free Function
The telephone features a hands-free speakerphone function:
- During a call, press the Hands-Free button to activate the speakerphone.
- To switch back to the handset, lift the handset.
- To adjust the hands-free volume, use the volume control buttons (usually up/down arrows) during a hands-free call.
Headset Operation
The TEMPORIS 880 includes an RJ9 headset jack for convenient hands-free communication with a compatible headset (not included).
- Plug your RJ9 headset into the dedicated headset jack on the side of the phone.
- To answer or make a call using the headset, press the Headset button (if available) or the Hands-Free button.
- To end a call, press the Headset button again.
Direct Memory Keys (M1-M10)
The phone has 10 direct memory keys (M1 to M10) for storing frequently dialed numbers.
To Store a Number:
- Lift the handset or press the Hands-Free button.
- Press the Store button (if available, or refer to specific key for programming).
- Dial the telephone number you wish to store.
- Press the Store button again.
- Press the desired memory key (M1-M10) to save the number.
To Dial a Stored Number:
- Lift the handset or press the Hands-Free button.
- Press the desired memory key (M1-M10). The stored number will be dialed automatically.
Figure 5: Close-up of the keypad, highlighting the M1-M10 memory keys, Mute button, and other features.
Mute Function
During a call, press the Mute button to temporarily disable your microphone. The other party will not hear you. Press the Mute button again to resume conversation.
Message Waiting Indicator (MWI)
The MWI light on the telephone will illuminate or flash to indicate that you have new voicemail messages, provided this service is supported by your telephone service provider.
Volume Control
Use the volume control buttons (up/down arrows) to adjust the listening volume during a call (handset or hands-free mode) or to adjust the ringer volume when the phone is idle.
Maintenance
To ensure the longevity and optimal performance of your Alcatel TEMPORIS 880 telephone, follow these simple maintenance guidelines:
- Cleaning: Use a soft, slightly damp cloth to clean the telephone's surface. Avoid using abrasive cleaners, solvents, or strong chemicals, as these can damage the finish.
- Environment: Keep the telephone away from direct sunlight, excessive heat, and moisture. Do not expose it to extreme temperatures.
- Handling: Handle the handset and cords with care. Avoid pulling on the cords forcefully, which can damage the connections.
- Storage: If storing the telephone for an extended period, disconnect it from the telephone line and store it in a cool, dry place.
Troubleshooting
If you encounter any issues with your Alcatel TEMPORIS 880, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No dial tone | Telephone line cord is disconnected or faulty. | Ensure the telephone line cord is securely plugged into both the phone and the wall jack. Test with another phone or line cord if available. |
| Cannot hear caller / Caller cannot hear me | Handset cord is loose or faulty; volume is too low; Mute function is active. | Check handset cord connections. Adjust volume using the volume buttons. Ensure the Mute button is not active. |
| Phone does not ring | Ringer volume is set to minimum or off. | Adjust the ringer volume using the volume control buttons when the phone is idle. |
| Display is blank or unreadable | No batteries or low batteries (if display requires them). | Check if AAA batteries are installed and replace them if necessary. |
If the problem persists after trying these solutions, please contact customer support.
Specifications
Below are the technical specifications for the Alcatel TEMPORIS 880 telephone:
- Model Number: ATL1417258
- Color: Black
- Display: 4-line alphanumeric display
- Special Features: Volume control, Integrated memory (for contacts/logs), Classic telephone design
- Material: Plastic
- Power Source: Line-powered (no external power adapter required)
- Dialer Type: Single keypad
- Dimensions (L x W x H): 24.3 x 20.8 x 6 centimeters
- Answering System Type: Digital (refers to MWI/voicemail integration)
- Headset Port: RJ9 jack
- Memory Keys: 10 direct memory keys
- Compatibility: Analog PBX, ATA, Router with FXS Port, PSTN line
- Wall Mountable: Yes
- Batteries: AAA batteries required for certain display functions (not included)
- Country of Origin: China
Warranty and Support
Manufacturer's Warranty
The Alcatel TEMPORIS 880 comes with a three-year warranty against manufacturing defects. Please retain your proof of purchase for warranty claims.
Customer Support
For further assistance, technical support, or warranty inquiries, please refer to the contact information provided with your purchase documentation or visit the official Alcatel support website. Please have your model number (ATL1417258) and purchase date ready when contacting support.