Introduction
This manual provides essential instructions for the safe and effective use of your Digipartspower AC Power Cord. This power cord is designed to provide reliable power to compatible Sony CFD series CD Player Radio/Cassette-Recorder models.
Safety Information
- Before connecting, ensure the power cord's tip size and connector type are compatible with your device. Refer to your device's manual for specific power input requirements.
- When in use, ensure the power cord is placed in a well-ventilated area to prevent overheating. Avoid covering the cord or placing it under carpets.
- Do not place the power cord on or near skin products, as certain chemicals may degrade the cable material over time.
- If you observe any abnormal conditions, such as excessive heat, smoke, or unusual odors, immediately disconnect the power cord from both the wall outlet and the device. Contact customer support for assistance.
- This product is certified CE / FCC / RoHS, indicating compliance with health, safety, and environmental protection standards.
- The power cord includes Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to safeguard your device.
Setup Instructions
- Inspect the Cord: Uncoil the power cord and inspect it for any visible damage, kinks, or frayed wires. Do not use if damaged.
- Identify Connectors: The power cord has two ends: a standard two-prong AC wall plug (NEMA 1-15P) and a figure-8 (C7) connector designed to plug into your device.
- Connect to Device: Carefully insert the figure-8 connector into the power input port of your Sony CFD series CD Player Radio/Cassette-Recorder. Ensure a snug fit.
- Connect to Power Outlet: Plug the two-prong AC wall plug into a standard, grounded electrical wall outlet.
- Verify Power: Once connected, your device should receive power. Refer to your device's manual for instructions on powering it on.
Image showing the Digipartspower AC power cord fully extended, displaying the two-prong wall plug on one end and the figure-8 device connector on the other. This illustrates the two distinct connection points of the cable.
Operating the Power Cord
The Digipartspower AC Power Cord functions as a passive power delivery component. Once properly connected, it supplies electrical power from the wall outlet to your compatible Sony CFD series device. There are no operational controls on the power cord itself. Device operation is managed through the controls on your Sony unit.
Care and Maintenance
- Cleaning: Disconnect the power cord from both the wall and the device before cleaning. Wipe the cord with a dry, soft cloth. Do not use liquid cleaners or solvents.
- Storage: When not in use, coil the power cord loosely. Avoid tight coiling or bending at sharp angles, which can damage the internal wires. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Always grasp the plug when inserting or removing the cord from an outlet or device. Do not pull on the cable itself.
Troubleshooting
If your device does not power on after connecting the Digipartspower AC Power Cord, consider the following:
- No Power:
- Ensure both ends of the power cord are securely connected to the device and the wall outlet.
- Verify that the wall outlet is functional by plugging in another known working appliance.
- Check for any visible damage to the power cord. If damaged, discontinue use and replace.
- Confirm that your device's power switch is in the "On" position.
- Intermittent Power:
- Check for loose connections at both the device and the wall outlet.
- Ensure the power cord is not pinched or stressed.
If issues persist, refer to your device's specific troubleshooting guide or contact customer support.
Product Specifications
| Feature | Detail |
|---|---|
| Brand | Digipartspower |
| Connector Type | Male-to-Male (NEMA 1-15P to IEC C7) |
| Compatibility | Sony CFD-775, CF-460S, CFD-D73, CFD-D75, CFD-DW83, CFD-G70, CFD-S22, CFD-E95 AM-FM CD Player Radio/Cassette-Recorder Series |
| Certifications | CE / FCC / RoHS |
| Protection Features | OVP, OCP, SCP |
| UPC | 753038403502 |
Image showing the Digipartspower AC power cord neatly coiled, with both the two-prong wall plug and the figure-8 device connector visible. This view highlights the compact form factor of the cord when stored.
Warranty and Customer Support
Warranty: This Digipartspower product is backed by a 30-Day Money Back Guarantee, a 60-Day Free Exchange with a paid return label, and a 360-Day Worry-Free Warranty.
Customer Support: For any questions, concerns, or abnormal conditions during use, please stop using the product immediately and contact our customer service center.
How to Contact Us: You can reach us directly through your purchase platform. Locate your order and use the "Problem with this order?" or "Contact Seller" option. We aim to resolve any issues within 24 hours.
Close-up image of the Digipartspower AC power cord, clearly showing the details of the two-prong wall plug and the figure-8 device connector. This view emphasizes the specific connector types for compatibility verification.
