Crazepony 1S LiPo Battery USB Charger (Model V1601575T270281) Instruction Manual

1. Product Overview

The Crazepony 1S LiPo Battery USB Charger is designed for convenient and efficient charging of 1S LiPo batteries (3.7V/4.20V). It features six independent charging channels, supporting both Micro 1.25 (mCX) and JST-PH 2.0 (mCPX) connectors. Users can select between 0.2A and 0.6A charge currents for each channel, providing flexibility for different battery capacities and charging needs. The compact USB-powered design makes it ideal for charging on the go.

2. Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in fire, personal injury, or property damage.

• Battery Compatibility: ONLY support LiPo 3.7V/4.20V 1S batteries. Do not attempt to charge other battery types or voltages.
• Supervision: Never leave charging batteries unattended. Always charge in a fire-safe area.
• Overcharging: Do not overcharge batteries. Disconnect batteries once fully charged.
• Current Selection: Select the appropriate charge current (0.2A or 0.6A) based on your battery's capacity. Using an excessively high current can damage the battery.
• Connector Polarity: Ensure correct battery polarity when connecting to the charger. Incorrect connection can cause damage to the charger and battery.
• Physical Damage: Do not use damaged batteries or chargers. Inspect for any signs of damage before use.
• Ventilation: Ensure adequate ventilation during charging. Do not cover the charger or batteries.
• USB Power Source: Use a reliable USB power source (5V±5% on 0.5-2.4A, suggested 2.4A or above).

3. Product Features

• Supports LiPo 3.7V/4.20V 1S batteries only.
• Selectable charge current: 0.2A or 0.6A via switch button. (Recommended: 0.2A for charging six batteries simultaneously, 0.6A for charging two or fewer).
• USB interface input: Suggested range 5V±5% on 0.5-2.4A (2.4A or above recommended).
• Multiple connector types: Micro 1.25 (mCX) and JST-PH 2.0 (mCPX).
• Simultaneous charging: Charges up to 6 batteries at once (consider battery width).
• Independent LED indicators: 6 LED lights show the charging state of each channel independently.

4. Package Contents

• 1 x Crazepony 1S LiPo Battery USB Charger

5. Setup

1. Connect the USB plug of the charger to a compatible USB power source (e.g., computer USB port, USB wall adapter, power bank).
2. The LED indicators on the charger will flash green when powered on and no battery is connected, indicating standby mode.

Image: The Crazepony 1S LiPo Battery USB Charger connected to a USB power source, illustrating its compact design and USB input.

6. Operating Instructions

1. Select Charging Current: For each charging port, use the small switch to select either 0.2A or 0.6A. It is recommended to use 0.2A if charging six batteries simultaneously, and 0.6A if charging two or fewer.
2. Connect Batteries: Carefully connect your 1S LiPo batteries to the appropriate Micro 1.25 (mCX) or JST-PH 2.0 (mCPX) ports on the charger. Ensure correct polarity.
3. Monitor Charging: The LED indicator for each connected battery will turn solid green, indicating that charging is in progress.
4. Charging Complete: Once a battery is fully charged, its corresponding LED indicator will turn off. Disconnect the battery promptly.

Image: Close-up view of the Crazepony 1S LiPo Battery USB Charger, highlighting the switches for selecting 0.2A or 0.6A charging current for JST-PH 2.0 or Micro JST 1.25 connectors.

Image: The Crazepony 1S LiPo Battery USB Charger with six 1S LiPo batteries connected and charging, demonstrating its multi-port capability.

7. LED Indicators

• Green Flash: Charger power on (standby, no battery connected).
• Green Solid: Battery is currently charging.
• LED Off: Battery is fully charged.

Image: Diagram illustrating the LED indicator states on the Crazepony 1S LiPo Battery USB Charger: green flash for power on, green solid for charging, and LED off for full charge.

8. Media Integration

Product Images

Main product image of the Crazepony 1S LiPo Battery USB Charger.

The Crazepony 1S LiPo Battery USB Charger demonstrating compatibility with various USB power sources like laptops, wall adapters, and power strips.

Image showing the solid bottom cover of the Crazepony 1S LiPo Battery USB Charger, providing protection.

The Crazepony 1S LiPo Battery USB Charger displayed on a digital scale, showing its lightweight design (12.5 grams).

9. Maintenance

• Keep the charger clean and free from dust and debris.
• Store the charger in a dry place away from direct sunlight and extreme temperatures.
• Avoid dropping or subjecting the charger to heavy impacts.
• Regularly inspect the charging ports and switches for any signs of wear or damage.

10. Troubleshooting

• No LED activity: Ensure the charger is properly connected to a functioning USB power source. Try a different USB port or adapter.
• Battery not charging (LED off): Check if the battery is properly connected to the correct port with correct polarity. The battery might already be fully charged.
• Slow charging: Ensure your USB power source provides sufficient current (2.4A or above recommended). Check the selected charge current (0.2A vs. 0.6A).
• Overheating: Discontinue use immediately if the charger or batteries become excessively hot. This may indicate a faulty battery or charger.

11. Specifications

• Product Dimensions: 2.87 x 3.94 x 0.39 inches (0.39"D x 0.98"W x 2.87"H)
• Item Weight: 0.441 ounces (12.5 Grams)
• Output Voltage: 4.2 Volts
• Input Voltage: 5V (via USB)
• Charge Current: Selectable 0.2A / 0.6A
• Battery Type: 1S LiPo (3.7V/4.20V)
• Connectors: Micro 1.25 (mCX), JST-PH 2.0 (mCPX)
• Model Number: V1601575T270281
• Manufacturer: Crazepony
• Date First Available: August 7, 2017

12. Warranty and Support

For warranty information or technical support, please contact Crazepony customer service through the retailer where the product was purchased. Please retain your proof of purchase for any warranty claims.