1. Product Overview
The FISCHER Pedale MTB Kunststoff are durable plastic pedals designed for various bicycle types, particularly mountain bikes. They feature a non-slip design for enhanced grip and integrated reflectors for improved visibility and safety, complying with German Road Traffic Licensing Regulations.
Key Features:
- Suitable for all bicycle types.
- Non-slip and non-slip special design for secure foot placement.
- Equipped with reflectors for increased visibility.
- Approved by German Road Traffic Licensing Regulations (StVZO).
- Lightweight plastic construction.
2. Setup and Installation
Proper installation of your new pedals is crucial for safety and performance. Please follow these steps carefully.
Required Tool:
- Pedal wrench (recommended item 85526) or a 15mm open-end wrench.
Installation Steps:
- Identify Left and Right Pedals: Pedals are typically marked with 'L' for left and 'R' for right. The right pedal (drive side) has a standard thread, while the left pedal has a reverse thread. This means the left pedal tightens counter-clockwise and loosens clockwise.
- Prepare Crank Arms: Ensure the threads on your bicycle's crank arms are clean and free of debris. Applying a small amount of bicycle grease to the pedal threads can prevent seizing and make future removal easier.
- Install Right Pedal: Insert the 'R' pedal into the right crank arm. Turn clockwise by hand to start threading. Once finger-tight, use your pedal wrench to firmly tighten the pedal. Do not overtighten, but ensure it is secure to prevent loosening during use.
- Install Left Pedal: Insert the 'L' pedal into the left crank arm. Turn counter-clockwise by hand to start threading (reverse thread). Once finger-tight, use your pedal wrench to firmly tighten the pedal.
- Final Check: After installation, ensure both pedals spin freely and are securely attached to the crank arms.
Figure 2.1: FISCHER Pedale MTB Kunststoff, showing the non-slip surface and integrated reflectors.
3. Operating Guidelines
These pedals are designed for general cycling use, offering a stable and secure platform for your feet.
- Foot Placement: Position your foot so the ball of your foot is over the pedal spindle for optimal power transfer and comfort.
- Non-Slip Design: The textured surface and molded pins provide excellent grip, even in wet conditions.
- Reflectors: The integrated reflectors enhance your visibility to others, especially in low-light conditions. Ensure they are clean and unobstructed.
- Regular Checks: Periodically check that the pedals are still securely tightened to the crank arms before each ride.
4. Maintenance
Regular maintenance will prolong the life and performance of your pedals.
- Cleaning: Clean the pedals with a damp cloth and mild soap. Avoid harsh chemicals that could damage the plastic.
- Inspection: Regularly inspect the pedal body for cracks or damage. Check the reflectors for cleanliness and ensure they are not broken.
- Spindle Check: Listen for any unusual noises (e.g., squeaking, grinding) from the pedal spindle, which might indicate worn bearings. While these pedals are not designed for user-serviceable bearings, excessive play or noise may indicate a need for replacement.
- Tightness: Re-check the tightness of the pedals on the crank arms periodically, especially after the first few rides.
5. Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Pedal feels loose or wobbly. | Pedal not tightened sufficiently. | Tighten the pedal firmly with a pedal wrench. Ensure correct threading (left pedal is reverse threaded). |
| Squeaking or grinding noise from pedal. | Worn internal bearings or lack of lubrication. | These pedals are generally not user-serviceable for bearings. If noise persists after ensuring tightness, consider replacing the pedals. |
| Foot slipping on pedal. | Mud/debris on pedal surface; worn non-slip features. | Clean the pedal surface. If the non-slip features are significantly worn, replacement may be necessary. |
6. Specifications
| Brand | FISCHER |
| Model Name | Pedale MTB Kunststoff |
| Part Number | 85836 |
| Bike Type | Mountain Bike (suitable for all bicycle types) |
| Color | Black |
| Material | Plastic |
| Item Weight | 0.3 Kilograms |
| Thread Size | 9/16 inches |
| Age Range | Adult (Unisex) |
7. Warranty and Support
For warranty information or technical support, please refer to the retailer or manufacturer's official website. Keep your proof of purchase for any warranty claims.
Manufacturer: FISCHER
