CURREN Men's Quartz Wristwatch Instruction Manual

1. Introduction

Thank you for choosing the CURREN Men's Quartz Wristwatch, Model 4331786451. This manual provides essential information for the proper setup, operation, and maintenance of your watch. Please read these instructions carefully to ensure optimal performance and longevity of your timepiece.

Image 1.1: Front view of the CURREN Men's Quartz Wristwatch.

This watch features a reliable quartz movement, an analog display, and a date function. The sub-dials and push buttons on this model are decorative and do not provide additional functionality.

2. Setup

2.1 Setting the Time

1. Locate the crown on the right side of the watch case.
2. Gently pull the crown out to its outermost position (Position 2).
3. Rotate the crown clockwise or counter-clockwise to move the hour and minute hands until the correct time is displayed.
4. Once the time is set, push the crown back into its original, innermost position (Position 0) to start the watch movement.

2.2 Setting the Date

1. Gently pull the crown out to the first click position (Position 1).
2. Rotate the crown clockwise or counter-clockwise to adjust the date display.
3. Once the correct date is displayed, push the crown back into its original, innermost position (Position 0).

Note: To avoid damaging the date mechanism, do not set the date between 9:00 PM and 3:00 AM. If the date needs adjustment during this period, first set the time outside this range, adjust the date, and then reset the time.

3. Operating the Watch

3.1 Basic Timekeeping

Your CURREN watch is powered by a precise quartz movement, ensuring accurate timekeeping. Once the time and date are set, the watch will operate continuously until the battery requires replacement.

3.2 Water Resistance

This watch is rated for 30 meters (3 ATM) water resistance. This means it is suitable for daily use and can withstand splashes, rain, or brief immersion in water. It is not recommended for swimming, showering, diving, or any water sports where it may be subjected to high-pressure water or prolonged immersion. Always ensure the crown is fully pushed in to maintain water resistance.

4. Maintenance

4.1 Cleaning

To maintain the appearance of your watch, wipe the case and crystal with a soft, dry cloth. For the leather strap, use a slightly damp cloth and allow it to air dry. Avoid using chemical cleaners, as they may damage the watch's finish or strap material.

4.2 Battery Replacement

The watch is powered by a battery (e.g., SONY battery, as shown in movement image). When the watch stops or the second hand begins to skip, it indicates a low battery. Battery replacement should be performed by a qualified watch technician to ensure proper sealing and maintain water resistance.

Image 4.1: Example of the watch's internal movement and battery.

4.3 Strap Care

The watch features a leather strap. To prolong its life, avoid prolonged exposure to direct sunlight, extreme temperatures, and moisture. If the strap becomes wet, dry it thoroughly with a soft cloth and allow it to air dry naturally. Avoid bending or twisting the strap excessively.

5. Troubleshooting

• Watch Not Running: Check if the crown is fully pushed in. If it is, the battery may need replacement.
• Incorrect Time/Date: Refer to Section 2 for instructions on how to set the time and date correctly.
• Condensation Inside Crystal: This may indicate a loss of water resistance. Avoid further contact with water and have the watch inspected by a professional.

6. Specifications

Image 6.1: Rear view of the watch case, displaying key markings.

7. Warranty and Support

For any questions, concerns, or warranty inquiries regarding your CURREN watch, please contact the seller or the point of purchase. Retain your proof of purchase for any potential warranty claims.