LONDAFISH 10L Solar/Battery Fish Feeder

1. Introduction and Overview

The LONDAFISH 10L Solar/Battery Fish Feeder is an intelligent, weatherproof automatic feeder designed for outdoor pond environments. It offers precise and programmable feeding schedules to ensure your fish receive optimal nutrition without overfeeding. With its dual-mode power supply (solar and battery), it provides reliable operation year-round.

This feeder is equipped with a 120-degree wide-angle dispersion system, ensuring feed is spread evenly across the pond. Its large 10-liter hopper minimizes the need for frequent refills, making it ideal for busy pond owners.

2. Product Features

• Dual-Mode Power Supply: Operates on both solar power and battery, ensuring continuous functionality for 365 days.
• Programmable Feeding: Supports up to 4 feedings per day with precise portion control, preventing overfeeding and promoting fish health.
• 120° Wide-Angle Dispersion: Patented oblique thrower ensures even feed distribution across the entire pond, minimizing fish injury.
• High-Capacity Hopper: A massive 10-liter tank (holds up to 10kg of feed) reduces the frequency of refills.
• Adjustable Feed Amount: Micro-adjustable dial control allows for precise feeding from 50g to 1400g per day, suitable for various fish species and sizes.
• Weatherproof Design: Constructed to withstand outdoor elements, ensuring durability and reliable performance.
• Rat-Proof Design: Engineered to deter pests from accessing the feed.

3. Components and Parts

Familiarize yourself with the main components of your LONDAFISH Pond Feeder:

• Control Panel: Located inside the lid for easy access to programming buttons and LCD display.
• Feeder Container (Hopper): The main compartment for storing fish feed. It has a built-in baffle that can be adjusted based on feed size.
• Discharge Port: Where the feed is ejected from the storage box.
• Battery Compartment: Located at the bottom of the unit, requiring four C-type alkaline batteries (not supplied).
• Solar Panel: Integrated on top for charging the internal battery (if applicable) or supplementing power.

4. Setup

1. Battery Installation: Open the battery compartment at the bottom of the feeder. Insert four new C-type alkaline batteries, ensuring correct polarity. Close the compartment securely.
2. Fill the Hopper: Open the lid of the feeder and fill the hopper with dry pellet fish feed. This feeder is designed for pellet feed up to 5mm in diameter. Do not use sticks or flake food as they may cause blockages.
3. Placement: Place the feeder on a stable surface at the edge of your pond or quarantine tank. Ensure the discharge port is positioned to allow feed to disperse into the water. For optimal solar charging, place the feeder where the solar panel receives direct sunlight for several hours a day. Avoid locations with prolonged direct sunlight if the unit is prone to overheating in extreme heat.
4. Secure Mounting: Ensure the feeder is securely mounted or placed to prevent it from being dislodged by wind or animals.

5. Operating Instructions

The feeder allows for precise programming of local time and feeding schedules.

5.1. Programming Local Time:

1. Press the 'SET' button. The hours display will blink.
2. Press the '+' button to set the correct hour.
3. Press the 'SET' button again. The minutes display will blink.
4. Press the '+' button to set the correct minutes.

5.2. Programming Feeding Time:

The feeder supports up to 4 feeding times per day.

1. Press the 'FEED' button. The LCD will display '1---'. This indicates you are entering Program Feeding Time 1.
2. Press the 'SET' button. The hours display will blink.
3. Press the '+' button to set the desired feeding hour.
4. Press the 'SET' button again. The minutes display will blink.
5. Press the '+' button to set the desired feeding minutes.
6. After setting Feeding Time 1, press the 'FEED' button sequentially to cycle through and program Feeding Times 2, 3, and 4. The procedure for setting subsequent feeding times is the same as for Feeding Time 1.

5.3. Adjusting Dispensing Amount:

The feeder has a dial control for adjusting the amount of feed dispensed per feeding. Refer to the included feeding guide for recommended amounts based on your fish species and pond size. Adjust the dial to increase or decrease the quantity.

5.4. Cancelling a Programmed Feeding:

If you wish to cancel a specific programmed feeding time, navigate to that feeding time (e.g., '1---') using the 'FEED' button, then press the '+' button until '----' appears on the LCD for that specific feeding time.

6. Maintenance

• Cleaning: Regularly clean the feeder, especially the hopper and discharge port, to prevent feed buildup and blockages. The manufacturer recommends hand washing. Ensure the unit is completely dry before refilling with feed.
• Battery Check: Check the battery level periodically. Replace all four C-type alkaline batteries when the power is low or if the feeder's performance declines. Do not use rechargeable batteries, as they may not provide sufficient power. A single set of batteries typically lasts about 3 months.
• Feed Inspection: Ensure the feed used is dry and free of moisture to prevent clumping and blockages. Only use pellet feed up to 5mm in diameter.
• Environmental Check: Periodically inspect the feeder's placement to ensure it remains stable and free from obstructions. Clear any debris from the solar panel to ensure efficient charging.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For any product inquiries, technical support, or warranty claims, please contact LONDAFISH customer service. Refer to the product packaging or the official LONDAFISH brand store for contact information.

Visit the official LONDAFISH Store: LONDAFISH Brand Store