Acoustic Audio by Goldwood AA15LBS
Acoustic Audio by Goldwood 1000W Bluetooth Speaker Set
Model: AA15LBS
Introduction
This user manual provides comprehensive instructions for the Acoustic Audio by Goldwood 1000W Bluetooth Speaker Set. This portable PA sound system is designed for various events, offering powerful audio performance and versatile connectivity options. Please read this manual thoroughly before operating the device to ensure proper setup and optimal performance.
Image: The Acoustic Audio by Goldwood 1000W Bluetooth Speaker Set, including the main speaker unit, an adjustable speaker stand, a wired microphone, and a remote control.
What's Included
Upon unboxing your Acoustic Audio by Goldwood 1000W Bluetooth Speaker Set, please ensure all the following components are present:
- Active Speaker Unit (15" Woofer)
- MP3 Remote Control
- Wired Microphone with Cable
- Adjustable Speaker Stand
- Power Cable
- Instruction Manual (this document)
Image: A visual representation of the included user manual, remote control, and wired microphone.
Setup Instructions
Follow these steps for initial setup and Bluetooth connection:
- Plug in the Speaker: Connect the power cable to the speaker's AC input and then to a standard 110V grounded wall outlet.
- Select Input: Press the small grey button to select the desired input: USB, SD, or Bluetooth.
- Turn on the Speaker: Locate the AC POWER switch on the back panel and turn it to the "ON" position.
- Adjust Volume: Turn the Line Level and Master Volume knobs to approximately halfway to avoid sudden loud sounds.
- Enter Bluetooth Mode: Press the "MODE" button until the speaker announces "Bluetooth Ready".
- Pair Device: On your Bluetooth-enabled device (smartphone, tablet, etc.), search for available devices and select "LS" to pair. Once connected, the speaker will confirm.
Image: Visual steps for connecting your device via Bluetooth, including plugging in the speaker, selecting input, powering on, adjusting volume, selecting Bluetooth mode, and pairing.
Operating the Speaker
The Acoustic Audio by Goldwood speaker offers multiple ways to play your audio:
- Bluetooth Connectivity: Stream audio wirelessly from your smartphone, tablet, or other Bluetooth-enabled devices.
- USB/SD Player: Insert a USB drive or SD card into the designated slots to play MP3 files directly. Use the included remote control for navigation.
- FM Tuner: Utilize the built-in FM tuner to listen to your favorite radio stations.
- Wired Inputs: Connect external audio sources using the RCA, 1/4 inch microphone, or 3.5mm AUX inputs. This is ideal for microphones, instruments, or other audio players.
- Microphone Usage: Plug the wired microphone into one of the 1/4 inch microphone inputs. Adjust the microphone volume and echo controls as needed.
- LED Light Display: The speaker features a multi-colored LED flashing light display on the woofer. There is an ON/OFF switch to control this feature, allowing you to match the mood of any event. For a brighter light show, increase the master volume.
- Equalizer: Use the 5-band slide graphic equalizer to fine-tune the audio output to your preference.
- Linking Speakers: The RCA line level outputs allow you to link this speaker to another powered speaker for an expanded sound system.
Image: An overview of the speaker's key features, including its powerful output, Bluetooth capability, graphic equalizer, LED woofer, and various media playback options.
Image: A detailed view of the speaker's multi-colored LED woofer, showcasing its vibrant lighting effects.
Note: No official product videos from the seller were available for embedding in this manual.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the speaker. Avoid using abrasive cleaners or solvents.
- Storage: When not in use, store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Always use the easy-to-grip handles and rolling rear wheels for transport. Ensure the speaker stand is properly adjusted and secured before placing the speaker on it.
- Power Cord: Regularly inspect the power cord for any damage. Do not use if the cord is frayed or damaged.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected; Power switch off; Outlet not working. | Ensure power cable is securely plugged in. Turn the AC POWER switch to "ON". Test the outlet with another device. |
| No sound output | Volume too low; Incorrect input selected; Device not paired (Bluetooth); Audio cable faulty. | Increase Master Volume and Line Level. Press MODE to select correct input. Re-pair Bluetooth device. Check audio cables for secure connection and damage. |
| LED lights not working | LED POWER switch is off. | Ensure the LED POWER switch on the back panel is in the "ON" position. Increase master volume for brighter lights. |
| Bluetooth connection issues | Device too far; Interference; Speaker not in pairing mode. | Move device closer to the speaker. Avoid obstacles. Ensure speaker is in "Bluetooth Ready" mode. Forget device on your phone and re-pair. |
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | AA15LBS |
| Output Wattage | 1000 Watts |
| Woofer Size | 15 inches |
| Tweeter Size | 2 inches |
| Frequency Response | 20Hz-20kHz |
| Noise Level | 102 dB |
| Impedance | 4 Ohm |
| Connectivity Technology | RCA, Bluetooth, USB, AUX |
| Power Source | AC (110V grounded wall plug) |
| Product Dimensions (L x W x H) | 14 x 16 x 27 inches |
| Item Weight | 37 Pounds |
| Material | Rubber |
| Color | Black |
| UPC | 849155047771 |
Image: A visual representation of the speaker's dimensions (16" x 14" x 27") and weight (37 lbs).
Warranty and Support
For detailed warranty information and customer support, please refer to the official user manual PDF or contact Acoustic Audio by Goldwood customer service.
You can download the full user manual here.
For additional product information and support, visit the Acoustic Audio by Goldwood Store.