1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Kadision LED Wall Pack with Dusk-to-Dawn Photocell. This high-performance outdoor lighting fixture is designed for commercial and residential applications, offering energy-efficient illumination with automatic dusk-to-dawn functionality.
Please read this manual thoroughly before installation and retain it for future reference.
2. Safety Information
WARNING: Risk of electric shock. Installation must be performed by a qualified electrician in accordance with the National Electrical Code and local electrical codes and ordinances.
- Disconnect power at the circuit breaker or fuse box before installation or servicing.
- Ensure the supply voltage is compatible with the fixture's requirements (100-277V AC).
- Do not install if the product is damaged. Inspect before installation.
- Wear appropriate personal protective equipment (PPE), including safety glasses and gloves.
- Ensure all connections are secure and properly insulated.
- This fixture is rated IP65 for wet locations; however, ensure all seals and gaskets are properly seated during installation to maintain water resistance.
3. Package Contents
Verify that all components are present before beginning installation:
- Kadision LED Wall Pack Fixture (1)
- Conduit Entry Plug (1)
- Protective Pad (1)
- Wire Nuts (3)
Figure 3.1: Product dimensions and included components.
4. Product Features
- High Performance: Delivers 7,800 lumens at 5000K daylight, replacing 150-200W HPS/MH fixtures with a high luminous efficacy of 130lm/W.
- Dusk-to-Dawn Photocell: Built-in photocell automatically turns the light ON at dusk and OFF at dawn, providing energy-efficient operation.
- Durable Construction: Features robust, anti-rust aluminum housing and a shatter-resistant polycarbonate (PC) lens.
- Weatherproof Design: IP65 waterproof rating ensures durability against various weather conditions.
- Long Lifespan: Designed for over 50,000 hours of operation.
- Certifications: ETL/cETL certified for safety and quality.
- Versatile Installation: Can be mounted over an electrical junction box or directly on the wall surface using conduit entries.
Figure 4.1: Built-in Dusk-to-Dawn Photocell.
Figure 4.2: Durability features of the LED Wall Pack.
5. Specifications
| Attribute | Value |
|---|---|
| Brand | kadision |
| Model Number | WP-60B-277-50K-P |
| Wattage | 60 Watts |
| Brightness | 7800 Lumens |
| Color Temperature | 5000K (Daylight) |
| Input Voltage | 100-277V AC |
| Material | Aluminum (Housing), Polycarbonate (Shade) |
| Color | Bronze |
| Product Dimensions | 14.2"L x 7.36"W x 9.25"H |
| Item Weight | 4.52 Pounds |
| Water Resistance Level | IP65 Waterproof |
| Light Source Type | LED |
| Special Features | Dusk-to-Dawn Photocell Auto On/Off, Energy Efficient, Hardwired |
| Certifications | ETL/cETL Listed |
| Warranty | 5-Year Limited Warranty |
6. Setup and Installation
The Kadision LED Wall Pack can be installed using either a junction box mount or a surface conduit mount.
Installation Steps:
- Prepare for Installation: Ensure power is disconnected at the circuit breaker. Open the fixture by unlatching the side clips and swinging the front cover open.
- Mounting Options:
- Junction Box Mount: Align the fixture with your existing electrical junction box. Use the center hole or appropriate knockouts on the back of the fixture for wiring access. Secure the fixture to the junction box using appropriate screws (not included).
- Surface Conduit Mount: Utilize one of the 1/2" conduit entry holes on the sides or back of the fixture. If using a side entry, remove the conduit entry plug. Secure the fixture directly to the wall surface using appropriate mounting hardware (not included).
- Wiring: Connect the electrical wires from your supply to the fixture's wires using the provided wire nuts:
- Connect the Black wire (Live/Hot) from the supply to the Black wire of the fixture.
- Connect the White wire (Neutral) from the supply to the White wire of the fixture.
- Connect the Green wire (Ground) from the supply to the Green wire of the fixture.
- Close Fixture: Carefully close the front cover, ensuring no wires are pinched. Latch the side clips to secure the cover.
- Restore Power: Restore power at the circuit breaker. The light should illuminate if it is dark, or remain off if it is daytime, due to the photocell.
Figure 6.1: Internal wiring and mounting options.
Figure 6.2: Suggested Installation Height for optimal lighting coverage.
7. Operating Instructions
This LED Wall Pack features a built-in dusk-to-dawn photocell for automatic operation.
- The light will automatically turn ON when the ambient light levels drop below approximately 20 lux (dusk).
- The light will automatically turn OFF when the ambient light levels rise (dawn).
Photocell Placement and Disabling:
- Ensure the photocell is located in an area that receives direct daylight and is not obstructed or too close to reflective surfaces, which could interfere with its operation.
- The photocell can be disabled by unplugging its wire connector inside the fixture, if manual control via a switch is desired.
- If necessary, the photocell can be relocated using one of the conduit entry holes for optimal light sensing.
Figure 7.1: Dusk-to-Dawn Photocell Sensor operation.
8. Maintenance
The Kadision LED Wall Pack is designed for minimal maintenance due to its durable construction and long-life LED components.
- Cleaning: Periodically clean the lens and housing with a soft, damp cloth to remove dirt, dust, or debris that may accumulate and affect light output or photocell performance. Do not use abrasive cleaners or solvents.
- Inspection: Annually inspect the fixture for any signs of damage, loose connections, or wear. Ensure all seals and gaskets remain intact to maintain the IP65 rating.
- No User-Serviceable Parts: There are no user-serviceable parts inside the fixture. Do not attempt to open or repair the LED module or driver.
9. Troubleshooting
If you experience issues with your LED Wall Pack, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn ON | No power supply Faulty wiring Photocell sensing too much light | Check circuit breaker/fuse. Verify all wire connections are secure. Ensure photocell is not obstructed or exposed to artificial light sources. Test at night or cover photocell. |
| Light does not turn OFF | Photocell not sensing enough light Photocell malfunction | Ensure photocell is exposed to sufficient daylight. Relocate photocell if necessary. If problem persists, contact customer support. |
| Light flickers or dims | Unstable power supply Loose wiring connection | Consult a qualified electrician to check power supply stability. Verify all wire connections are secure. |
If the issue persists after attempting these solutions, please contact Kadision customer support.
10. Warranty and Support
Kadision stands behind its products with a hassle-free 5-Year Limited Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical assistance, or any questions regarding your LED Wall Pack, please contact Kadision customer support directly via Amazon's Buyer-Seller Messaging Service. Please have your product model number (WP-60B-277-50K-P) and purchase information ready when contacting support.
