1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your ECO-WORTHY 24V 120W Submersible Well Pump. Please read these instructions thoroughly before using the product and retain them for future reference.
Image 1.1: ECO-WORTHY 24V 120W Submersible Well Pump. This image displays the stainless steel pump unit with its attached power cable.
2. Safety Information
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury or property damage.
- Ensure the power source matches the pump's voltage requirements (24V DC).
- Do not operate the pump with damaged cords or wires.
- Never pump flammable liquids such as gasoline or petroleum products.
- Ensure proper grounding for all electrical connections.
- Keep children and unauthorized personnel away from the pump during operation.
- Always disconnect power before performing any maintenance or installation.
3. Product Overview
The ECO-WORTHY 24V 120W Submersible Well Pump is designed for remote watering needs, utilizing DC power sources like solar panels and batteries. It features a durable stainless steel construction and is suitable for various applications.
Key Features:
- Durable Construction: Made from 304 stainless steel for corrosion resistance.
- Efficient Operation: Designed for DC power, offering fast startup and stable performance.
- High Lift Capability: Maximum lift of 230 feet (70 meters).
- Wide Application: Ideal for garden irrigation, farm use, tank filling, and other remote water supply needs.
- Easy Connectivity: Compatible with solar panels and 24V battery systems.
Image 3.1: Detailed view of pump components, highlighting the 304 stainless steel filter, upgraded brush motor, 3M 12AWG corrosion-resistant copper core cable, double lifting ring, and thickened base.
Image 3.2: Internal comparison showing a pure copper motor versus general motors, and precision bearings versus ordinary bearings, indicating quality components.
4. Specifications
| Specification | Value |
|---|---|
| Model | L07030101006-1 (SPX-24) |
| Voltage | 24V DC |
| Max Current | 5.0A |
| Power | 120W |
| Flow Rate (Max) | 12 LPM / 3.2 GPM |
| Max Lift | 230 ft (70 m) |
| Max Submersion | 100 ft (30 m) |
| Cable Length | 10 ft (3 m) |
| Material | Stainless Steel |
| Product Dimensions | 4.09"L x 4.09"W x 13"H |
| Item Weight | 6.39 Pounds |
Image 4.1: Visual representation of key specifications including voltage, power, max flow, and max head.
Image 4.2: Diagram illustrating the physical dimensions of the submersible pump, including diameter and height.
5. Setup & Installation
Proper installation is crucial for the pump's performance and longevity. Follow these steps carefully.
5.1 Electrical Connections
- Identify the positive and negative wires. The white wire is positive, and the black wire is negative.
- Connect the pump directly to a 24V DC power source (e.g., solar panel array, battery bank).
- Ensure all connections are secure and insulated to prevent water ingress and short circuits.
Image 5.1: Close-up of the pump's power cable, showing the positive (+) and negative (-) wire indicators for correct electrical connection.
5.2 Plumbing Connections
- Attach a suitable discharge hose to the pump's outlet. Ensure a tight, leak-free connection.
- The pump features a water input filter and a water output connection.
Image 5.2: Close-up of the pump's label and the top section, showing the water input screen and the hose barb for water output.
5.3 Deployment
- Lower the pump into the well or water source using a strong rope or cable attached to the lifting rings.
- Ensure the pump is fully submerged but not resting on the bottom to avoid drawing sediment.
- The maximum submersion depth is 100 feet (30 meters).
Image 5.3: Diagram illustrating a typical solar water pump system setup, including solar panel, controller, battery, submersible pump in a well, and a storage tank for agricultural irrigation.
Video 5.1: This video demonstrates the setup and operation of the ECO-WORTHY 24V Stainless Steel Well Pump, showing its components and how it pumps water.
6. Operating Instructions
Once installed, the pump operates by receiving power from its DC source. Ensure the power source is active and providing the correct voltage.
- Connect the pump to a 24V DC power supply.
- The pump will begin to operate, drawing water from the source and discharging it through the connected hose.
- Monitor the water flow and ensure the pump is not running dry. Running dry can damage the pump.
Image 6.1: Examples of maximum flow rate applications, such as watering a garden, filling a pool, or providing water for livestock, demonstrating the pump's capacity.
Image 6.2: Collage showing diverse applications of the pump, including farmland irrigation, water tower supply, livestock watering, household use, fishpond circulation, and general well pumping.
7. Maintenance
Regular maintenance helps ensure optimal performance and extends the pump's lifespan.
- Clean the Filter: Periodically inspect and clean the stainless steel filter screen to prevent clogging and maintain efficient water intake.
- Inspect Cables: Regularly check the power cable for any signs of wear, damage, or corrosion. Replace if necessary.
- Winterization: In freezing climates, remove the pump from the water source and store it in a dry, frost-free location to prevent damage.
Image 7.1: Diagram highlighting the corrosion-resistant copper core cable and the stainless steel deciduous debris double-layer filter, both important for pump protection and maintenance.
8. Troubleshooting
Refer to the following table for common issues and their potential solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump does not start | No power, incorrect wiring, low voltage | Check power supply, verify wiring (positive/negative), ensure adequate voltage. |
| Low water flow | Clogged filter, air in system, low water level, discharge hose kinked | Clean filter, bleed air from system, check water source, straighten hose. |
| Pump runs but no water | Pump not submerged, water source depleted, severe air lock | Ensure pump is fully submerged, check water level, prime the pump if necessary. |
| Pump cycles on/off rapidly | Low voltage, thermal overload, faulty controller | Check power supply, allow pump to cool, inspect controller if applicable. |
9. Warranty & Support
ECO-WORTHY products are designed for reliability and performance. For warranty information, technical support, or replacement parts, please contact ECO-WORTHY customer service directly. Always provide your product model number (L07030101006-1) and purchase details when seeking support.
You can visit the official ECO-WORTHY store for more information: ECO-WORTHY Store