1. Introduction
This manual provides detailed instructions for the safe and effective use of your SVAKOM Winni Vibrating Ring with Remote. Please read this manual thoroughly before first use and retain it for future reference. The SVAKOM Winni is designed for personal use, featuring body-safe silicone, multiple vibration modes, and a wireless remote control.
2. Safety Information
- Material Safety: The Winni is made of body-safe silicone. If you experience any irritation, discontinue use immediately.
- Cleaning: Always clean the device before and after each use with warm water and a mild, toy-safe cleaner.
- Waterproof: The device is completely waterproof. However, ensure the charging port is dry before charging. Avoid submerging the device for extended periods or in extreme depths.
- Charging: Use only the provided charging cable. Do not use the device while it is charging.
- Storage: Store in a cool, dry place away from direct sunlight and out of reach of children.
- Disposal: Do not dispose of the device with household waste. Follow local regulations for electronic waste disposal.
3. Product Overview
The SVAKOM Winni consists of two main components: the vibrating ring unit and the wireless remote control.
Image 3.1: SVAKOM Winni Vibrating Ring and Remote Control. The image displays the main vibrating ring unit on the left, which is purple with a silver control panel, and the smaller, oval-shaped wireless remote control on the right, also purple with control buttons.
Components:
- Vibrating Ring Unit: The primary device, made of body-safe silicone, containing the motor and rechargeable battery.
- Wireless Remote Control: Used to operate the vibrating ring unit from a distance.
- USB Charging Cable: For recharging both the vibrating ring and the remote control.
4. Setup
4.1 Initial Charging
Before first use, fully charge both the vibrating ring unit and the wireless remote control.
- Locate the charging port on both the vibrating ring unit and the remote control. This is typically a small, discreet port.
- Connect the USB charging cable to the charging ports of both devices.
- Plug the other end of the USB cable into a standard USB power adapter (not included) or a computer's USB port.
- The indicator light on the device will illuminate during charging.
- Charging typically takes approximately 1 hour for the main unit. The indicator light will change or turn off once fully charged.
Note: The main unit has a 430 mAh lithium battery, providing approximately 0.67 hours of continuous use on a full charge.
5. Operating Instructions
5.1 Power On/Off
- To Power On: Press and hold the power button on the vibrating ring unit or the 'S' button on the remote control for 2-3 seconds until the device vibrates briefly.
- To Power Off: Press and hold the power button on the vibrating ring unit or the 'S' button on the remote control for 2-3 seconds until the device stops vibrating.
5.2 Vibration Modes and Intensity
The SVAKOM Winni features 5 distinct vibration modes, each with 5 intensities, plus an intelligent mode, offering a total of 26 different settings.
Image 5.1: Diagram illustrating the five vibration modes of the SVAKOM Winni: Normal Mode, Caressing Mode, Joyous Mode, Passionate Mode, and Climax Mode. The image also shows the main unit and remote with concentric circles indicating vibration.
- Changing Modes: Press the 'S' button on the remote control or the mode button on the main unit to cycle through the 5 vibration modes.
- Adjusting Intensity: Use the '+' and '-' (or up/down arrow) buttons on the remote control to increase or decrease the vibration intensity within the selected mode.
- SVAKOM Intelligent Mode: This mode automatically adjusts vibration patterns and intensities. Activate it by cycling through the standard modes until you reach the intelligent mode setting.
5.3 Wireless Remote Control Usage
The remote control allows for convenient operation of the Winni device.
Image 5.2: An image depicting the quiet operation of the SVAKOM Winni, with a finger held to lips, and the remote control emitting wireless signals to the main unit. This highlights the discreet and remote-controlled functionality.
- Ensure both the main unit and the remote are charged and powered on.
- The remote control operates wirelessly, allowing for discreet adjustments of modes and intensities.
- Maintain a reasonable distance between the remote and the main unit for optimal signal transmission.
6. Maintenance and Care
6.1 Cleaning
Proper cleaning ensures hygiene and prolongs the lifespan of your device.
- After each use, wash the vibrating ring unit with warm water and a mild, toy-safe soap or specialized cleaner.
- Rinse thoroughly to remove all soap residue.
- Dry the device completely with a lint-free cloth before storage.
- The remote control can be wiped clean with a damp cloth. Do not submerge the remote control.
6.2 Storage
- Store the SVAKOM Winni in a clean, dry, and cool place.
- Keep it away from direct sunlight, extreme temperatures, and dust.
- Avoid storing with other materials that could damage the silicone, such as petroleum-based lubricants or certain plastics.
7. Troubleshooting
If you encounter issues with your SVAKOM Winni, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery; device not properly charged. | Ensure the device is fully charged. Check charging cable and power source. |
| Vibrations are weak or inconsistent. | Low battery; selected intensity is too low. | Recharge the device. Increase the intensity using the remote or device buttons. |
| Remote control is not responding. | Remote battery low; remote not paired; interference. | Charge the remote control. Ensure both devices are powered on and within range. Try powering both devices off and on again. |
| Device turns on by itself or standby mode is erratic. | Internal malfunction. | Ensure the device is fully powered off when not in use. If the issue persists, contact customer support. |
| Water ingress despite being waterproof. | Damage to the device; improper sealing of charging port. | Inspect the device for any visible damage. Ensure the charging port cover (if any) is securely closed. Discontinue use if water is suspected inside and contact customer support. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 3155622 |
| Material | Body-safe Silicone |
| Color | Violet |
| Battery Type | Lithium Polymer (Main Unit) |
| Battery Capacity | 430 mAh (Main Unit) |
| Charging Time | Approx. 1 hour |
| Usage Time | Approx. 0.67 hours (continuous) |
| Vibration Modes | 5 modes + SVAKOM Intelligent Mode (26 total settings) |
| Waterproof Rating | Fully Waterproof |
| Product Dimensions (L x W x H) | 4.6 x 2.2 x 5.7 inches |
| Weight | 7.36 ounces |
| Manufacturer | Prodyne Corporation (as per Amazon listing) |
9. Warranty and Support
9.1 Warranty Information
SVAKOM products typically come with a limited warranty covering manufacturing defects. Please refer to the warranty card included with your product or visit the official SVAKOM website for specific warranty terms and conditions, as these may vary by region and product.
9.2 Customer Support
For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact SVAKOM customer support through their official website or the contact information provided with your purchase. When contacting support, please have your product model number (3155622) and proof of purchase available.
