SAMSUNG DVD-V9700 DVD/VCR Combo Recorder Instruction Manual

1. Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your SAMSUNG DVD-V9700 HiFi Stereo DVD & VCR Combo Recorder. This unit combines a DVD/CD player with a 4-head Hi-Fi Stereo VHS cassette tape player and digital VCR recorder. It features HDMI output, DIVX compatibility, DTS Surround, and Dolby Digital audio support.

2. Setup

2.1 Unpacking the Unit

Carefully remove the DVD-V9700 unit and all accessories from the packaging. Ensure all components are present: the main unit, remote control, and AV connector cords.

2.2 Connecting to Your Television

The DVD-V9700 offers multiple connection options for video and audio output. Choose the connection type that best suits your television and desired quality.

Figure 1: Rear view of the SAMSUNG DVD-V9700 unit, showing various input/output ports and the power cord connected.

HDMI Connection (Recommended for best quality)

For optimal video and audio quality, connect an HDMI cable (not included) from the HDMI OUT port on the rear of the DVD-V9700 to an HDMI IN port on your television.

Component Video Connection

Connect component video cables (red, green, blue) from the COMPONENT VIDEO OUT ports on the rear of the DVD-V9700 to the corresponding COMPONENT VIDEO IN ports on your television. Also, connect the red and white audio cables from the LINE OUT AUDIO ports to your TV's audio input.

Composite Video Connection

Connect a composite video cable (yellow) from the VIDEO OUT port on the rear of the DVD-V9700 to the VIDEO IN port on your television. Connect the red and white audio cables from the LINE OUT AUDIO ports to your TV's audio input.

Figure 2: Close-up view of the rear panel of the DVD-V9700, highlighting the HDMI, Component Video, Composite Video, and Audio output ports.

2.3 Power Connection

Plug the power cord into the AC inlet on the rear of the unit, then plug the other end into a standard wall outlet.

3. Operating Instructions

3.1 Powering On/Off

Press the POWER button on the front panel or the remote control to turn the unit on or off.

3.2 Playing a DVD/CD

1. Press the DVD button on the front panel or remote to select DVD mode.
2. Press the OPEN/CLOSE button to open the DVD tray.
3. Place a DVD or CD disc onto the tray with the label side facing up.
4. Press the OPEN/CLOSE button again to close the tray. The disc will load automatically.
5. Press the PLAY button to begin playback.

3.3 Playing a VHS Tape

1. Press the VCR button on the front panel or remote to select VCR mode.
2. Insert a VHS cassette tape into the VCR slot. The unit will automatically load the tape.
3. Press the PLAY button to begin playback.

3.4 Recording to VHS

The DVD-V9700 is a digital VCR recorder without an internal tuner. This means it cannot record broadcast TV channels directly. To record, you must connect an external source (e.g., a cable box, satellite receiver, or another video player) to the unit's LINE IN 1 or LINE IN 2 (if available) ports on the rear panel.

1. Connect your external video source to the LINE IN ports (yellow for video, red/white for audio) on the rear of the DVD-V9700.
2. Insert a recordable VHS cassette tape into the VCR slot.
3. Select the appropriate input source on your TV and the DVD-V9700 (e.g., AV1, L1).
4. Begin playback on your external source.
5. Press the REC button on the front panel or remote control to start recording.
6. Press the STOP button to end recording.

3.5 Front Panel Controls

The front panel provides basic controls for both DVD and VCR functions:

• POWER: Turns the unit on/off.
• DVD OPEN/CLOSE: Opens and closes the DVD tray.
• DVD PLAY/PAUSE/STOP: Controls DVD playback.
• VCR PLAY/PAUSE/STOP: Controls VCR playback.
• VCR REW/FFWD: Rewinds and fast-forwards VHS tapes.
• VCR REC: Initiates VHS recording.
• AUDIO/VIDEO INPUTS (Front): For temporary connection of external devices like camcorders.

3.6 Remote Control

The included remote control provides full functionality for both DVD and VCR operations, including menu navigation, chapter/track selection, volume control (if connected to a TV via HDMI and TV supports CEC), and input selection.

4. Maintenance

4.1 Cleaning the Unit

• Always disconnect the power cord before cleaning.
• Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or aerosol sprays.
• For the DVD tray, use a soft, lint-free cloth. Avoid touching the lens inside the tray.
• For the VCR head, use a specialized VHS head cleaning tape sparingly, as overuse can cause wear.

4.2 Disc and Tape Care

• Handle discs by their edges to avoid fingerprints and scratches.
• Store discs in their cases when not in use.
• Keep VHS tapes away from strong magnetic fields and direct sunlight.
• Rewind tapes fully before storing them.

5. Troubleshooting

If you encounter issues with your DVD-V9700, refer to the following common problems and solutions:

6. Specifications

7. Warranty and Support

For warranty information and technical support, please refer to the documentation included with your product or visit the official SAMSUNG support website. Keep your purchase receipt as proof of purchase for any warranty claims.