GROHE Lineare Bath Spout 13383001 Instruction Manual

1. Product Overview

The GROHE Lineare Bath Spout 13383001 is a wall-mounted bath filler designed with a minimalist and contemporary aesthetic. It features a composition of cylindrical bodies and thin rectangular forms, creating a harmonious design suitable for modern bathrooms.

Key Features:

• High pressure performance (over 1.0 bar)
• Scratch-resistant and easy-to-clean chrome finish
• Effortless installation and maintenance
• Water-saving technology, reducing consumption by up to 50%
• Smooth movement for precise control

Image 1.1: Front view of the GROHE Lineare Bath Spout.

2. Setup and Installation

This bath spout is designed for wall-mount, single-hole installation. Ensure you have the necessary tools and plumbing connections before beginning. Professional installation is recommended.

Required Components (not included):

• UK Compression Adaptors 15 mm x 3/8 Inch (GROHE 46914000 recommended)

Installation Steps:

1. Ensure the main water supply is turned off.
2. Prepare the wall opening according to the dimensions provided in the technical drawing. The connection is G 1/2.
3. Install the necessary plumbing connections within the wall, ensuring they are securely fastened and leak-free.
4. Mount the bath spout to the wall connection, ensuring a tight and secure fit. Use appropriate sealing materials as required.
5. Carefully tighten all connections. Avoid over-tightening to prevent damage.
6. Turn on the main water supply and check for any leaks.

Image 2.1: Technical drawing showing dimensions and G 1/2 connection for installation. Diameter is 70mm, projection from wall is 170mm, and wall plate thickness is 5mm.

3. Operating Instructions

The GROHE Lineare Bath Spout operates with a single handle (if part of a mixer system, otherwise it is a simple on/off spout). To operate:

• Water Flow: Turn the handle to initiate water flow.
• Water Temperature: Adjust the handle position to achieve the desired water temperature (if connected to a mixer).
• Water Shut-off: Return the handle to the closed position to stop the water flow.

The design ensures smooth movement for total control over water flow and temperature.

4. Maintenance

To ensure the longevity and appearance of your GROHE Lineare Bath Spout, follow these maintenance guidelines:

• Cleaning: Clean the chrome finish regularly with a soft cloth and a mild, non-abrasive cleaner. Avoid using harsh chemicals, abrasive pads, or acidic cleaners, as these can damage the scratch-resistant surface.
• Water Spots: Wipe the spout dry after each use to prevent water spots and mineral buildup, especially in hard water areas.
• Inspection: Periodically check all connections for any signs of leaks or wear. Address any issues promptly to prevent further damage.

5. Troubleshooting

If you encounter issues with your bath spout, consider the following common troubleshooting steps:

• Low Water Flow: Check if the main water supply is fully open. Ensure there are no blockages in the water lines or the spout's aerator (if applicable).
• Leaks: Inspect all connections for tightness. If leaks persist, turn off the water supply and consult a qualified plumber.
• No Water: Verify that the main water supply to your home and to the bathroom is turned on.

For persistent problems, contact GROHE customer support or a certified plumber.

6. Specifications

7. Warranty Information

The GROHE Lineare Bath Spout 13383001 comes with a Five (5) Years Manufacturer's Warranty. This warranty covers defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.

For full details regarding warranty terms and conditions, please refer to the official GROHE warranty documentation or contact GROHE customer support.

8. Customer Support

For further assistance, technical support, or warranty claims, please contact GROHE customer service:

• Visit the official GROHE website for contact information specific to your region.
• Refer to the packaging or included documentation for direct support contacts.

When contacting support, please have your product model number (13383001) and proof of purchase readily available.