Introduction
Thank you for choosing the Orbit 96005 Oscillating Sprinkler. This manual provides essential information for the proper setup, operation, and maintenance of your new sprinkler. Designed for efficient and uniform watering of large rectangular areas, this sprinkler is built with high-quality, impact-resistant plastic for durability.
Please read this manual thoroughly before first use to ensure optimal performance and longevity of your product.
Product Features
- Durable Construction: Made from high-quality, impact-resistant plastic, designed for outdoor use with cold water only.
- Adjustable Coverage: Features a remote adjustment mechanism allowing adaptation to various lengths and widths for rectangular irrigation.
- Multiple Spray Patterns: Offers 4 adjustment possibilities: Center, Left, Right, and Full coverage.
- Uniform Water Distribution: Equipped with 17 pressure jet nozzles to ensure even water distribution across the watering area.
- Wide Coverage Area: Capable of covering up to 279 square meters (approximately 3000 sq. ft.).
- Easy Maintenance: Includes a removable cleaning cap on the end for convenient nozzle maintenance.
- Standard Connection: Features an automatic plastic connector for easy hose attachment.
Figure 1: Main view of the Orbit 96005 Oscillating Sprinkler, showcasing its green body and oscillating spray bar.
Setup
- Unpack the Sprinkler: Carefully remove the sprinkler from its packaging. Inspect for any visible damage.
- Positioning: Place the sprinkler on a flat, stable surface within the area you wish to water. Ensure the oscillating bar has clear movement without obstructions.
- Connect Water Hose: Attach a standard garden hose to the automatic plastic connector located at one end of the sprinkler. Hand-tighten the connection to prevent leaks.
Figure 2: Detail of the water inlet connector, where the garden hose attaches.
- Water Supply: Ensure your water supply is cold water only.
Operating Instructions
The Orbit 96005 offers four distinct spray patterns to customize your watering area. Use the adjustment dial to select the desired pattern.
Figure 3: The adjustment dial for selecting spray patterns.
- Full Coverage: Rotate the dial to the "Full" position for maximum watering area, covering up to 279 square meters.
- Center Coverage: Select "Center" to water only the central portion of the sprinkler's range.
- Left Coverage: Choose "Left" to direct water primarily to the left side of the sprinkler.
- Right Coverage: Select "Right" to direct water primarily to the right side of the sprinkler.
Once the desired pattern is set, slowly turn on the water supply. Adjust water pressure as needed to achieve the desired spray distance and coverage.
Maintenance
Regular maintenance ensures optimal performance and extends the life of your sprinkler.
- Nozzle Cleaning: Over time, mineral deposits or debris can clog the nozzles, leading to uneven spray. The sprinkler features 17 pressure jet nozzles. To clean, gently wipe the nozzles with a soft brush or cloth.
- End Cap Cleaning: The sprinkler is equipped with a cleaning cap on the end of the oscillating bar. Unscrew this cap to flush out any accumulated debris from inside the bar. Re-tighten the cap securely after cleaning.
- Winter Storage: Before freezing temperatures, disconnect the sprinkler from the hose and drain all water from it. Store the sprinkler in a dry, protected area to prevent damage from freezing.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Uneven spray or reduced coverage | Clogged nozzles; Low water pressure | Clean nozzles and flush the oscillating bar using the end cap. Ensure adequate water pressure from your supply. |
| Sprinkler not oscillating | Debris in the oscillation mechanism; Insufficient water pressure | Flush the sprinkler thoroughly. Check water pressure. If the issue persists, the internal mechanism may be damaged. |
| Leaks at hose connection | Loose connection; Damaged hose washer | Ensure the hose is tightly connected. Check and replace the hose washer if damaged. |
Specifications
| Attribute | Detail |
|---|---|
| Product Dimensions (LxWxH) | 14 x 47.5 x 9 cm (5.5 x 18.7 x 3.5 inches) |
| Weight | 310 grams (0.68 lbs) |
| Model Number | 96005 |
| Material | Plastic |
| Color | Green |
| Coverage Area | Up to 279 square meters (approx. 3000 sq. ft.) |
| Number of Nozzles | 17 |
| Manufacturer | S&M (as per product data) |
Warranty and Support
Orbit products are manufactured to high-quality standards. For specific warranty information, please refer to the packaging or contact Orbit customer support directly. Keep your purchase receipt as proof of purchase.
For technical assistance, replacement parts, or further inquiries, please visit the official Orbit website or contact their customer service department. Contact information can typically be found on the product packaging or the brand's official website.
