Introduction
The VIVO DESK-V000DB is a deluxe height-adjustable standing desk converter designed to transform your existing desk into an active workstation. This unit allows you to effortlessly switch between sitting and standing positions throughout your workday, promoting better posture, reducing muscle tension, and enhancing productivity. Its spacious surface accommodates single and dual monitor setups, along with a laptop and other essential accessories.

Image: The VIVO DESK-V000DB standing desk converter in a typical office setup, featuring two monitors and a keyboard on its surfaces.
Safety Information
Please read all safety instructions carefully before assembly and use to prevent injury or damage to the product. Keep this manual for future reference.
- Weight Capacity: Do not exceed the maximum weight capacity of 15 kg (33 lbs) for the desktop surface and 2 kg (4.4 lbs) for the keyboard tray. Overloading can cause instability and damage.
- Stable Surface: Always place the desk converter on a flat, stable, and level surface capable of supporting the combined weight of the converter and your equipment.
- Pinch Points: Be aware of pinch points during height adjustment. Keep hands and fingers clear of moving parts and the scissor lift mechanism.
- Clearance: Ensure adequate clearance around the desk converter when adjusting its height to avoid collisions with other objects or walls.
- Children and Pets: Keep children and pets away from the desk converter during operation and adjustment.
Package Contents
Verify that all components are present and in good condition before beginning assembly. If any parts are missing or damaged, please contact VIVO customer support.
- Main Desk Riser Unit (Pre-assembled)
- Removable Keyboard Tray
- Hardware for Keyboard Tray Attachment
- Instruction Manual
Setup and Assembly
The VIVO DESK-V000DB is designed for minimal assembly, allowing you to set it up quickly and begin using it.
- Unpack the Unit: Carefully remove all components from the packaging. Retain packaging materials for future transport or storage if needed.
- Position the Main Unit: Place the main desk riser unit onto your existing desk or workstation. Ensure it is centered and stable.
- Attach the Keyboard Tray: Align the keyboard tray with the designated attachment points on the main unit. Secure it using the provided hardware. Refer to the included hardware diagram for specific screw types and locations.
- Organize Your Workstation: Place your monitors, laptop, keyboard, mouse, and other accessories onto the desk converter surfaces. Route cables neatly to prevent interference with the lifting mechanism.

Image: A diagram illustrating the dimensions of the desk converter and its weight capacities for both the desktop and keyboard tray.
Operating Instructions
The DESK-V000DB features a pneumatic spring lift assist system for smooth height adjustments.
- Adjusting Height: To raise or lower the desk converter, simultaneously press and hold the two levers located on either side of the desktop surface.
- Raising the Desk: While holding the levers, gently lift the desktop surface upwards. The pneumatic springs will assist in the movement. Release the levers at your desired height to lock the desk in place.
- Lowering the Desk: While holding the levers, gently push the desktop surface downwards. Apply slight pressure to overcome the pneumatic spring resistance. Release the levers at your desired height to lock the desk in place.
- Height Range: The desk converter offers an adjustment range from a minimum height of 15 cm (6 inches) to a maximum height of 50 cm (19.5 inches) from your existing desk surface.

Image: A side view demonstrating the smooth height adjustment motion of the VIVO desk converter, transitioning from a lower to a higher position.

Image: The VIVO standing desk converter shown at its maximum extended height, ready for standing use.
Maintenance
Regular maintenance will help ensure the longevity and optimal performance of your desk converter.
- Cleaning: Wipe surfaces with a soft, damp cloth. For stubborn marks, use a mild, non-abrasive cleaner. Avoid harsh chemicals that may damage the finish.
- Inspection: Periodically check all screws and connections to ensure they are tight. Re-tighten if necessary.
- Moving Parts: Keep the scissor lift mechanism free of dust and debris. Do not lubricate the pneumatic springs unless specifically instructed by VIVO support.
Troubleshooting
If you encounter issues with your VIVO DESK-V000DB, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Difficulty lifting/lowering the desk. | Overload, levers not fully engaged, or uneven weight distribution. | Ensure total weight on the desk does not exceed capacity. Press both levers fully and simultaneously. Distribute weight evenly on the desktop. |
| Desk feels unstable or wobbly. | Not placed on a flat surface, loose connections, or uneven load. | Verify the underlying desk surface is flat and stable. Check and tighten all assembly screws. Redistribute items on the desk. |
| Keyboard tray screws scratching the underlying desk. | Exposed screw heads on the underside of the keyboard tray. | Consider applying protective pads (not included) over the screw heads on the underside of the keyboard tray to prevent surface damage to your main desk. |
If the problem persists after attempting these solutions, please contact VIVO customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | VIVO |
| Model Number | DESK-V000DB |
| Colour | Black |
| Product Dimensions (L x W x H) | 90.17 cm x 59.18 cm x 15.24 cm (at lowest height) |
| Material | Plastic (Desktop), Alloy Steel (Base) |
| Item Weight | 22.5 kg |
| Height Adjustment Range | 15 cm to 50 cm (6 inches to 19.5 inches) |
| Desktop Weight Capacity | 15 kg (33 lbs) |
| Keyboard Tray Weight Capacity | 2 kg (4.4 lbs) |
| Compatible Models | Laptops, Monitors |
| Date First Available | June 9, 2017 |
Warranty and Support
VIVO stands behind the quality of its products. The DESK-V000DB is backed by a 3-year Manufacturer Warranty.
For technical assistance, troubleshooting, or warranty claims, please contact VIVO customer support:
- Phone: 1-309-278-5303 Ext. 1
- Online: Visit the official VIVO store on Amazon for more information and support resources: VIVO Store
No relevant official product videos were found for this model with a 'Seller' creator type.