STAR WARS VD01ROW

STAR WARS Sphero BB-9E App-Enabled Droid Instruction Manual

Model: VD01ROW | Brand: STAR WARS

Introduction

The Sphero BB-9E is a menacing astromech droid of the First Order, designed for interactive control via a smart device. This app-enabled droid offers an immersive experience within the Star Wars galaxy, allowing users to control its movements, engage in holographic simulations with the Droid Trainer, and observe its interactions with other Sphero Star Wars App-enabled Droids. BB-9E also features signature LED lights in its dome and can react while viewing films from the Star Wars saga.

What's Included

  • BB-9E App-Enabled Droid
  • Inductive charging base with USB charging cable
  • Droid Trainer
  • Quick Start guide

Setup Guide

1. Charging Your BB-9E Droid

Before first use, ensure your BB-9E Droid is fully charged. Place the BB-9E Droid onto its inductive charging base. Connect the USB charging cable from the base to a compatible USB power source. The droid's indicator lights will show charging status. A full charge typically takes approximately 3 hours.

Sphero BB-9E Droid on its inductive charging base

Image: The BB-9E Droid resting on its inductive charging base, connected via a USB cable for power.

2. Downloading and Connecting the App

To control your BB-9E, you will need to download the Sphero App. Search for "Sphero App" in your device's app store (iOS or Android). Once installed, open the app and follow the on-screen instructions to connect to your BB-9E Droid via Bluetooth. Ensure your device's Bluetooth is enabled.

Operating Your BB-9E Droid

Authentic Movement

Control BB-9E's movements directly from your smart device. The app provides intuitive controls to drive the droid, allowing it to roll and move authentically, mimicking its on-screen counterpart.

Holographic Simulation with Droid Trainer

Place BB-9E on its Droid Trainer accessory. Use the app to explore the Star Wars galaxy through augmented reality. The Droid Trainer enhances the interactive experience by projecting holographic simulations.

Sphero BB-9E Droid on its Droid Trainer

Image: The BB-9E Droid positioned on its Droid Trainer, ready for holographic simulations.

Droid-to-Droid Experience

If you own other Sphero Star Wars App-enabled Droids, BB-9E can interact with them. Place multiple droids in proximity and observe their unique responses and communication within the app.

Watch With Me Feature

View films from the Star Wars saga with BB-9E by your side. The droid will react to key moments in the movies, enhancing your viewing experience with its movements and sounds.

Signature LEDs

BB-9E's dome is equipped with vibrant LED lights that illuminate during operation and interactions, adding to its authentic appearance.

Person controlling Sphero BB-9E with a tablet

Image: A person using a tablet to control the Sphero BB-9E Droid, demonstrating app interaction.

Maintenance

Cleaning

To clean your BB-9E, gently wipe the exterior with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the droid's finish. Ensure no moisture enters the charging port or any seams.

Storage

When not in use, store your BB-9E Droid in a cool, dry place away from direct sunlight and extreme temperatures. It is recommended to store the droid on its charging base to maintain battery health, or ensure it has a partial charge if storing for extended periods.

Troubleshooting

App Connectivity Issues

If you experience difficulty connecting your BB-9E to the app:

  • Ensure Bluetooth is enabled on your smart device.
  • Make sure the BB-9E Droid is charged and powered on.
  • Restart the Sphero App and try connecting again.
  • If the issue persists, try restarting your smart device.
  • Verify that you are using the correct and most up-to-date Sphero App. Some older versions of the app may no longer support the BB-9E Droid.

Charging Problems

If your BB-9E Droid is not charging:

  • Check that the USB charging cable is securely connected to both the inductive base and the power source.
  • Try using a different USB port or power adapter.
  • Ensure the droid is correctly seated on the inductive charging base.
  • If the battery does not hold a charge, it may indicate a battery issue.

Technical Specifications

FeatureDetail
Product Dimensions1.94 x 1.13 x 1.4 inches
Item Weight7.9 ounces
Item Model NumberVD01ROW
ManufacturerSphero
Recommended Age18 - 18 months (Note: Safety information suggests not suitable for children under 8 years)
Batteries1 Lithium Polymer battery required (included)

Safety Information

Not suitable for children under 8 years. For use under adult supervision.

Warranty and Support

Specific warranty details are not provided in the product data. For warranty claims, technical support, or further assistance, please contact the manufacturer, Sphero, directly through their official website or customer service channels.

Official Product Videos

No official seller videos are available for this product in the provided data.

Related Documents - VD01ROW

PreviewBB-8 App Enabled Droid User Manual - Safety, Operation, and Warranty Information
Comprehensive user manual for the BB-8 App Enabled Droid by Sphero, detailing safety guidelines, operating instructions, maintenance, warranty information, and disposal procedures. Includes regulatory compliance details.
PreviewSphero BB-8 Head Teardown and Cleaning Guide
Detailed guide on how to disassemble, clean, and reassemble the head of the Sphero BB-8 droid. Learn to access and clean the wheels for optimal performance.
PreviewStar Wars: Legion SWQ28 Miniature Assembly Instructions
Assembly guide for Star Wars: Legion miniatures including General Grievous, Battle Droids, B2 Super Battle Droids, and Droidikas. Features step-by-step instructions and part identification for SWQ28 models from Atomic Mass Games.
PreviewStar Plan Platoon Attack Craft KK20002 Building Instructions
Detailed building instructions for the Star Plan Platoon Attack Craft (KK20002), featuring 2 Droidekas and 32 Battle Droids. Includes step-by-step assembly guidance for the main vehicle and figures.
PreviewD-O Interactive Remote Control Droid Instructions - Star Wars
Official instructions for the D-O Interactive Remote Control Droid from Star Wars. Learn how to set up, pair, charge, and operate your droid, with troubleshooting tips and important safety information.
PreviewT3-DO Droid Build Instructions by MrBaddeley
Comprehensive build instructions for the T3-DO droid, a 3D printable robot project by MrBaddeley. Includes hardware lists, assembly steps, and RC settings for the T3-DO robot.