Syntus D50

Syntus D50 USB Portable Essential Oil Diffuser User Manual

Model: D50 | Brand: Syntus

Product Overview

The Syntus D50 USB Portable Essential Oil Diffuser is a compact device designed to disperse essential oil aromas and provide humidification in various environments such as vehicles, offices, and homes. It features a USB power supply, automatic shut-off, and a 50ml water capacity.

Syntus D50 USB Portable Essential Oil Diffuser

Image: Syntus D50 USB Portable Essential Oil Diffuser. This image displays the compact design of the diffuser.

Key Features:

  • USB Powered: Conveniently powered via any standard USB port.
  • Auto Shut-off: Automatically turns off when water level is low for safety.
  • 50ml Capacity: Provides continuous mist for several hours.
  • Aroma Emission: Effectively diffuses essential oil fragrances.
  • Portable Design: Compact size fits most vehicle cup holders and small spaces.

Setup Instructions

  1. Remove Top Cover: Gently lift the top cover of the diffuser.
  2. Add Water: Fill the water tank with clean tap water. Ensure the water level is between the 'MIN' and 'MAX' lines. Do not exceed the 'MAX' line to prevent malfunction. The capacity is approximately 50ml.
  3. Add Essential Oils: Add a few drops of your preferred essential oil directly into the water tank.
  4. Replace Top Cover: Securely place the top cover back onto the diffuser.
  5. Connect Power: Plug the USB cable into the diffuser and connect the other end to a compatible USB power source (e.g., car USB port, computer, USB wall adapter).
Diffuser water level indicators

Image: Water level indicators on the Syntus D50 diffuser, showing the 'MAX' line. Ensure water is filled between minimum and maximum levels.

Four step guide to filling and operating Syntus D50 diffuser

Image: A visual guide demonstrating the four steps to prepare the diffuser for use: lifting the cover, adding water, adding essential oils, and replacing the cover before powering on.

Operating Instructions

Once the diffuser is filled and connected to power, operate it using the control buttons on the top.

  • Power On/Off: Press the power button once to turn on the diffuser. Press it again to turn it off.
  • Mist Mode Selection: Press the power button twice quickly to switch to intermittent mist mode (30 seconds on, 30 seconds off). Press it once more to return to continuous mist.
  • Light Control: Press the light button once to turn on the color-changing LED lights. Press it again to fix the light to a specific color. Press it a third time to turn off the lights.
  • Automatic Shut-off: The diffuser will automatically turn off when the water level is too low to prevent damage.
Syntus D50 diffuser operating in a car cup holder

Image: The Syntus D50 diffuser emitting mist and glowing in a car's cup holder, demonstrating its portable use.

Syntus D50 diffuser on an office desk next to a laptop

Image: The Syntus D50 diffuser in operation on an office desk, highlighting its suitability for personal workspaces.

Maintenance

  • Cleaning: It is recommended to clean the diffuser after each use to prevent residue buildup and maintain optimal performance. Use a soft cloth and mild detergent.
  • Water Type: Use clean tap water. Avoid using filtered or distilled water, as this may affect the diffuser's mist output.
  • Handling: Handle the diffuser with care, especially when it contains liquids. Ensure the top cover is securely in place to prevent spills. Avoid tilting or shaking the device excessively when full, as water may enter the internal circuitry. If water enters the circuitry, disconnect power immediately, open the device, and allow it to dry completely before reuse.

Troubleshooting

ProblemPossible CauseSolution
No mist or low mist output
  • Water level below MIN or above MAX line.
  • Diffuser is dirty or clogged.
  • Incorrect water type used.
  • Adjust water level to be between MIN and MAX.
  • Clean the diffuser thoroughly.
  • Use clean tap water.
Device is leaking
  • Overfilled water tank.
  • Device tilted or shaken excessively.
  • Manufacturing defect (less common).
  • Ensure water is not above the MAX line.
  • Keep the diffuser upright and stable during operation.
  • If persistent, contact customer support.
Diffuser not turning on
  • No power or loose connection.
  • Internal circuitry damage from water.
  • Check USB connection and power source.
  • If water entered, ensure device is completely dry before attempting to power on. If issue persists, contact customer support.

Specifications

  • Model Number: D50
  • Dimensions: 2.76 x 2.76 x 5.12 inches
  • Weight: 4.9 ounces
  • Water Capacity: 50ml
  • Power Source: USB
  • Special Features: Portable, Auto Shut-off, LED Color-Changing Lights
  • Recommended Uses: Home, Office, Vehicle

Warranty and Support

The Syntus D50 USB Portable Essential Oil Diffuser comes with a standard 12-month warranty. Upon product registration, the warranty period is extended to 18 months.

For technical support or warranty claims, please contact Syntus customer service:

© 2024 Syntus. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.