Ermont Console Table User Manual

1. Product Overview

The Ermont Console Table is a versatile furniture piece designed to enhance your living space. It features a durable black metal frame and a manufactured wood top with a charter oak finish, offering a blend of modern and farmhouse aesthetics. This table is suitable for various uses, including displaying decorative items, organizing entryway essentials, or serving as an accent piece in a dining area.

Figure 1.1: Full view of the Ermont Console Table, showcasing its charter oak top and black metal frame.

2. Safety Information

• Read all instructions carefully before assembly and use.
• Keep all small parts and packaging materials away from children.
• Ensure all connections are securely tightened before placing items on the table.
• Do not overload the table. Refer to the specifications section for weight limits (if available, otherwise use general caution).
• Place the table on a flat, stable surface to prevent tipping.
• Avoid climbing or standing on the table.

3. Parts List

Before beginning assembly, ensure all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

• Table Top (Manufactured Wood, Charter Oak Finish)
• Metal Frame Components (Black Finish)
• Assembly Hardware (Screws, bolts, Allen wrench, etc. - specific items may vary)

Figure 3.1: Detail of the connection between the metal frame and the manufactured wood top.

4. Setup and Assembly Instructions

Assembly typically requires two adults. Please follow these general steps. Specific instructions may vary slightly based on the exact hardware provided.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratches.
2. Identify Parts: Refer to the parts list and diagrams (if provided in your package) to identify each component.
3. Assemble Frame: Connect the metal frame components using the provided hardware. Do not fully tighten screws until the entire frame is assembled.
4. Attach Table Top: Carefully place the manufactured wood top onto the assembled metal frame. Align the pre-drilled holes.
5. Secure Top: Attach the table top to the frame using the remaining hardware.
6. Final Tightening: Once all parts are assembled, gradually tighten all screws and bolts until secure. Do not overtighten.
7. Placement: Carefully move the assembled table to its desired location.

Figure 4.1: Dimensional diagram of the console table, useful for planning placement.

5. Operating and Usage

The Ermont Console Table is designed for indoor use as a decorative and functional surface. Its slim profile makes it ideal for entryways, hallways, behind sofas, or as a serving table in dining areas.

• Placement: Position the table against a wall or behind a sofa for stability and aesthetic appeal.
• Weight Distribution: Distribute weight evenly across the table surface. Avoid concentrating heavy items in one spot.
• Decorative Use: Utilize the surface for displaying lamps, books, photo frames, or other decorative accents.
• Storage: The open design allows for storage underneath with baskets or bins, enhancing organization.

Figure 5.1: The table top displaying decorative items, highlighting its functional use.

6. Maintenance and Care

Proper care will help maintain the appearance and longevity of your console table.

• Cleaning: Wipe the table surface and frame with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
• Spills: Immediately wipe up any spills to prevent staining or damage to the wood finish.
• Heat and Moisture: Use coasters under hot or wet items to protect the table surface.
• Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.
• Periodic Check: Periodically check and tighten all hardware connections to ensure stability.

Figure 6.1: Detail of the charter oak finish on the manufactured wood top, showing its texture.

7. Troubleshooting

If you encounter any issues with your Ermont Console Table, refer to the following common solutions:

• Wobbling Table:
  • Ensure the table is placed on a level surface.
  • Check all screws and bolts; tighten any that are loose.
• Loose Parts:
  • Re-examine the assembly instructions and ensure all hardware is correctly installed and tightened.
• Scratches or Dents:
  • For minor imperfections, touch-up pens or furniture repair kits designed for wood finishes may be used.

Figure 7.1: Detail of the table leg and base, showing the sturdy metal construction.

8. Specifications

9. Warranty and Support

For warranty information or customer support regarding your Ermont Console Table, please refer to the documentation included with your purchase or contact the retailer/manufacturer directly. Ensure you have your purchase receipt and model information (Ermont, LRFY1913) available when contacting support.

Manufacturer: Laurel Foundry Modern Farmhouse