PRO lIGHT 111510
PRO LIGHT 20W LED Dock Light
Model: 111510
Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of your PRO LIGHT 20W LED Dock Light, model 111510. This robust lighting solution is designed for industrial and commercial applications, offering 1700 lumens of bright, energy-efficient illumination.
Please read this manual thoroughly before installation and use, and retain it for future reference.
Safety Information
Observe the following safety precautions to prevent injury or damage to the product:
- Always disconnect power before installing, servicing, or cleaning the fixture.
- Ensure the power source matches the specified voltage (120 Volts).
- Do not operate the light with damaged wiring or components.
- Avoid direct eye exposure to the LED light source, as it can be intensely bright.
- Installation should be performed by a qualified electrician or trained personnel in accordance with local electrical codes.
- Mount the fixture securely to a stable surface capable of supporting its weight.
Package Contents
Verify that all components are present and undamaged upon unpacking:
- 1 x PRO LIGHT 20W LED Dock Light (Model 111510) with integrated arm assembly
Setup and Installation
The PRO LIGHT 20W LED Dock Light is designed for secure wall mounting. Follow these steps for proper installation:
- Select Mounting Location: Choose a sturdy wall or support structure near the dock area that can safely bear the weight of the light and its extended arm. Ensure the location allows for the full 40-inch extension of the arm without obstruction.
- Mount the Arm Assembly: Secure the base of the dock light's arm assembly to the chosen surface using appropriate fasteners (not included) for the wall material. Ensure the mounting is level and robust.
- Connect Power: Plug the light's power cord into a standard 115V/120V AC outlet. Ensure the outlet is properly grounded and protected by a circuit breaker.
- Verify Operation: Once securely mounted and powered, turn on the light using the integrated on/off switch.
Image: The PRO LIGHT 20W LED Dock Light, showing the yellow extendable arm, light head, and power cord with a standard plug. This illustrates the complete unit for installation.
Image: The PRO LIGHT 20W LED Dock Light mounted on a wall, with its arm extended to illuminate a dock area. This demonstrates the typical installed appearance and functionality.
Operating Instructions
The PRO LIGHT 20W LED Dock Light is designed for straightforward operation:
- Power On/Off: Locate the integrated on/off switch on the light fixture. Toggle the switch to turn the light on or off.
- Adjusting the Arm: The articulated arm can extend up to 40 inches and pivot to direct light precisely where needed. Carefully adjust the arm and light head to achieve optimal illumination for your workspace. Ensure all pivot points are secure after adjustment.
Image: Close-up of the PRO LIGHT 20W LED Dock Light, highlighting its rugged IP65 waterproof and dust-tight housing, durable and versatile design, and the location of the on/off switch.
Maintenance
Regular maintenance ensures optimal performance and longevity of your dock light:
- Cleaning: Disconnect power before cleaning. Wipe the exterior of the light and arm with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically inspect the power cord for any signs of damage, fraying, or cuts. Check all mounting hardware and arm pivot points for tightness and wear.
- LED Longevity: The integrated LED bulb has an average life of 50,000 hours, minimizing the need for frequent bulb replacement.
Troubleshooting
If the dock light is not functioning as expected, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the unit | Check power cord connection, wall outlet, and circuit breaker. |
| Light flickers | Loose connection or unstable power supply | Ensure power cord is securely plugged in. Test with a different outlet if possible. |
| Arm does not hold position | Loose pivot points | Tighten the bolts at the arm's pivot points. Do not overtighten. |
Specifications
Detailed technical specifications for the PRO LIGHT 20W LED Dock Light:
- Model Number: 111510
- Wattage: 20 Watts
- Voltage: 120 Volts
- Power Source: 115V AC
- Brightness: 1700 Lumens
- Bulb Type: LED
- LED Life: Approximately 50,000 hours
- Arm Extension: Up to 40 inches
- Lighting Range: 60 feet
- Beam: 60 feet
- Material: Blend (Steel finish)
- Ingress Protection (IP) Rating: IP65 (Waterproof & Dust Tight Housing)
- Product Dimensions: 2.54 x 2.54 x 2.54 cm (approximate base dimensions); 5.1 kg (Item Weight)
- Measured Dimensions (Light Head): Height: 5.25", Length: 8.75", Width: 8.25"
Image: Visual representation of key electrical specifications for the PRO LIGHT 20W LED Dock Light, including 1700 lumens, 20 watts, 120 volts, and 0.18 amps.
Image: Diagram illustrating the measurement specifications of the PRO LIGHT 20W LED Dock Light, showing 5.25 inches height, 8.75 inches length, and 8.25 inches width for the light head.
Warranty and Support
Warranty: Probuilt warrants that this product will be free of defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact the manufacturer directly.
Support: For technical assistance, replacement parts, or further inquiries, please contact the manufacturer, Southwire Company. Retain your purchase receipt for warranty claims.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.