Introduction
The Mobil 1 M1C-253A Extended Performance Oil Filter is engineered to provide superior protection for your engine. Designed with robust components and advanced filtration media, this filter is proven to protect for up to 20,000 miles or one full year, exceeding many auto manufacturers' recommended oil change intervals. It effectively removes over 99% of harmful contaminants, ensuring your engine oil remains cleaner for longer periods.
Key features include:
- Protects for 20,000 Miles or up to 1 year.
- Removes over 99% of contaminants with high-efficiency synthetic blend media.
- Heavy-duty canister designed to withstand 9 times the normal vehicle oil system operating pressure.
- Enhanced nitrile gasket and anti-drain back valve to prevent leaks and dry starts.
What's in the Box
- 1x Mobil 1 M1C-253A Extended Performance Oil Filter
Image: The Mobil 1 M1C-253A Extended Performance Oil Filter shown alongside its retail packaging and accompanying O-rings.
Installation
Proper installation of your Mobil 1 oil filter is crucial for optimal performance and engine protection. Always refer to your vehicle's service manual for specific instructions and safety precautions before beginning any maintenance.
Required Tools and Materials:
- New Mobil 1 M1C-253A Oil Filter
- New engine oil (refer to your vehicle's specifications)
- Oil drain pan
- Wrench for drain plug
- Oil filter wrench (if applicable)
- Funnel
- Gloves and safety glasses
- Rags or shop towels
Installation Steps:
- Prepare the Vehicle: Ensure the engine is cool. Park the vehicle on a level surface and engage the parking brake. For safety, consider using jack stands if lifting the vehicle.
- Drain Old Oil: Place the drain pan under the oil drain plug. Remove the drain plug and allow all the old oil to drain completely. Reinstall the drain plug with a new washer if required by your vehicle's manufacturer.
- Remove Old Oil Filter: Locate the old oil filter. Place the drain pan underneath it to catch any residual oil. Use an oil filter wrench to loosen and remove the old filter. Be prepared for oil to spill.
- Prepare New Filter: Take your new Mobil 1 M1C-253A oil filter. Apply a thin film of new engine oil to the rubber gasket of the new filter. This ensures a proper seal and prevents the gasket from sticking during future removal.
Image: Front view of the Mobil 1 M1C-253A oil filter, highlighting the filtration media.
Image: Side view of the Mobil 1 M1C-253A oil filter, showing the pleated media structure.
Image: Top view of the Mobil 1 M1C-253A oil filter, showing the opening and gasket. - Install New Filter: Hand-tighten the new filter onto the engine until the gasket makes contact with the mounting surface. Then, tighten an additional 3/4 to 1 full turn, or as specified by your vehicle's manual. Do not overtighten.
- Add New Oil: Using a funnel, add the recommended amount and type of new engine oil to your vehicle's engine.
- Check for Leaks: Start the engine and let it run for a few minutes. Check for any oil leaks around the new filter and the drain plug. Turn off the engine and recheck the oil level, adding more if necessary.
- Dispose of Old Oil and Filter: Properly dispose of the old oil and filter at an authorized recycling center.
Operating Principle
The Mobil 1 M1C-253A Extended Performance Oil Filter functions by continuously filtering engine oil as it circulates through the engine. The high-efficiency synthetic blend media traps microscopic contaminants such as dirt, metal particles, and sludge, preventing them from circulating and causing wear to critical engine components. The anti-drain back valve ensures that oil remains in the filter when the engine is off, preventing dry starts and providing immediate lubrication upon ignition.
Maintenance
For optimal engine health and to benefit from the extended performance capabilities of the Mobil 1 M1C-253A oil filter, it is recommended to replace the filter every 20,000 miles or once a year, whichever comes first. This interval is guaranteed by Mobil 1 and is significantly longer than many standard oil filter replacement recommendations. Regular oil and filter changes are essential for maintaining engine cleanliness and longevity.
Troubleshooting
Oil Leak After Installation:
- Cause: Improperly tightened filter, damaged gasket, or old gasket stuck to engine block.
- Solution: Ensure the filter is tightened correctly (hand-tight plus 3/4 to 1 turn). Check that the old gasket was completely removed from the engine block before installing the new filter. Verify the new gasket is properly seated and lubricated.
Low Oil Pressure Light On:
- Cause: Insufficient oil, clogged filter (unlikely with new filter), or faulty oil pressure sensor.
- Solution: Check oil level immediately and add oil if low. If the light persists, consult a qualified mechanic.
Filter Does Not Fit:
- Cause: Incorrect filter model for your vehicle.
- Solution: Double-check your vehicle's specifications and ensure you have the correct Mobil 1 filter model. The M1C-253A is designed for specific vehicle service types including Car, Sports Utility Vehicle, Truck, and Van.
Specifications
| Attribute | Value |
|---|---|
| Brand | Mobil |
| Product Grade | Performance Part |
| Vehicle Service Type | Car, Sports Utility Vehicle, Truck, Van |
| Item Dimensions (L x W x H) | 2.9 x 3 x 4.6 inches |
| Thread Size | M16 x 1.5 |
| Item Weight | 1.6 ounces |
| Manufacturer | Mobil 1 |
| Number of Items | 1 |
| Automotive Fit Type | Vehicle Specific Fit |
| UPC | 071924214675 |
| Model Number | M1C-253A |
| Manufacturer Part Number | M1C-253A |
| Date First Available | February 26, 2015 |
Warranty and Support
The Mobil 1 M1C-253A Extended Performance Oil Filter is backed by the Mobil 1 annual protection limited warranty. This warranty covers the filter for up to one full year or 20,000 miles, whichever comes first, when used as directed and in conjunction with Mobil 1 motor oil.
For detailed warranty information or technical support, please refer to the official Mobil 1 website or contact Mobil 1 customer service directly.
