Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your JOMITOP 4FT V Shape LED Integrated Light Fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Safety Information
- Electrical Hazard: Always disconnect power at the circuit breaker before installation or servicing.
- Qualified Electrician: Installation should be performed by a qualified electrician or trained personnel.
- Voltage Compatibility: Ensure the supply voltage (AC85-265V) matches the fixture's requirements.
- Wiring: All wiring must comply with national and local electrical codes.
- Operating Environment: Suitable for indoor or outdoor use without direct water exposure. Operates in temperatures from -20°C to 50°C (-68°F to 120°F).
- Damage Inspection: Do not install if the product is damaged. Contact customer support for assistance.
Package Contents
Verify that all components are present before beginning installation:
- 4FT V Shape LED Integrated Light Fixture (Quantity: 25)
- 25CM (10 inch) Pigtail Cables (Quantity: 25)
- Mounting Clips (Quantity: 75, 3 per tube)
- Screws
- Interconnection Jumpers (Tube-to-tube connectors)
Figure 1: Included accessories for the JOMITOP 4FT V Shape LED Integrated Light Fixture, including the 25CM pigtail cable, mounting clips, screws, and tube-to-tube connectors.
Specifications
| Brand | JOMITOP |
| Model Number | T8VY12-36W-TS-CW |
| Light Type | LED |
| Wattage | 36 Watts |
| Equivalent Wattage | 80 Watts (Fluorescent) |
| Bulb Shape Size | T8 |
| Light Color | Cold White |
| Color Temperature | 6000 Kelvin |
| Voltage | AC85-265V |
| Brightness | 2160 Lumens (120 Lumen/Watt) |
| Light Source Operating Life | 50,000 Hours |
| Beam Angle | 270 Degrees (V-shape design) |
| Material | Aluminum Alloy + PC (Clear Cover) |
| Operating Temperature | -20°C to 50°C (-68°F to 120°F) |
| Indoor/Outdoor Usage | Indoor, Outdoor (no direct water exposure) |
Figure 2: JOMITOP 4FT V Shape LED Integrated Light Fixture, illustrating its 4-foot length and integrated T8 base design.
Setup and Installation
Follow these steps for proper installation. Ensure power is disconnected before starting.
- Prepare the Installation Area: If replacing an old fixture, safely remove it and ensure the wiring is accessible.
- Install Mounting Clips: Secure the mounting clips to the desired surface (e.g., ceiling, wall, cooler door) using the provided screws. Three clips are recommended per fixture for secure mounting.
- Snap LED Tube Light into Clips: Carefully align the LED tube light with the installed mounting clips and snap it into place. Ensure it is securely fastened.
- Connect to Power Source: Use the provided 25CM pigtail cable to connect the first LED fixture to your AC85-265V power source. Ensure proper wiring (Live, Neutral, Ground).
- Interconnect Multiple Lights (Optional): For multiple lights, connect the output end of the first tube light to the input of the second using the provided interconnection jumpers. You can connect multiple tube lights from a single power source.
Figure 3: Visual guide for connecting the power cable, securing the fixture with mounting clips, and linking multiple units together.
Figure 4: Detail of two JOMITOP LED fixtures connected end-to-end using an interconnection jumper for continuous lighting.
Operating Instructions
Once installed and wired correctly, the JOMITOP LED Integrated Light Fixture operates by simply applying power. There are no additional controls on the fixture itself.
- Power On/Off: Control the light fixture using the wall switch or circuit breaker connected to its power supply.
- Light Output: The V-shape design and clear cover provide a 270-degree light distribution, optimizing illumination for various applications such as shop lighting or cooler doors.
Figure 5: Close-up view of the double-row LED chips and clear cover, designed for high light output and wide beam angle.
Maintenance
The JOMITOP LED Integrated Light Fixture requires minimal maintenance due to its long lifespan and durable construction.
- Cleaning: Ensure power is off before cleaning. Use a soft, dry, or slightly damp cloth to wipe the fixture. Avoid abrasive cleaners or solvents.
- No User-Serviceable Parts: The LED chips are integrated and not user-replaceable. Do not attempt to open or modify the fixture.
- Inspection: Periodically inspect the fixture and wiring for any signs of damage or loose connections.
Troubleshooting
If you encounter issues with your LED light fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose wiring; faulty fixture. | Check circuit breaker. Verify all wiring connections are secure. If problem persists, contact support. |
| Light flickers. | Unstable power supply; loose connection. | Ensure stable power. Check wiring connections. |
| Lights disconnect when connected end-to-end in varying temperatures. | Thermal contraction/expansion causing separation. | Ensure fixtures are securely mounted and consider adding additional locking blocks or supports at connection points to prevent movement due to temperature changes. |
Warranty and Support
JOMITOP products are designed for durability and performance. For warranty claims or technical support, please refer to the following information:
- Return Policy: This product is eligible for return or replacement within 30 days of purchase.
- Customer Support: For further assistance, please contact JOMITOP customer service through the retailer's platform or visit the official JOMITOP store page.