1. Introduction
Thank you for purchasing the Albrillo LED Floor Lamp. This 46-inch tall contemporary standing lamp is designed to provide ambient lighting for your living room, bedroom, home, or office. Its elegant fabric shade and modern design complement various interior styles. Please read this manual carefully before assembly and use to ensure safe and optimal performance.
2. Safety Instructions
- Always unplug the lamp from the power outlet before cleaning, changing the bulb, or performing any maintenance.
- Do not use the lamp in wet or damp locations.
- Ensure the voltage of your power supply matches the lamp's requirements (120 Volts).
- Do not exceed the maximum wattage for the bulb (40 watts).
- Keep the lamp away from flammable materials.
- This lamp is for indoor use only.
- Do not attempt to modify or disassemble the lamp. Refer all servicing to qualified personnel.
3. Package Contents
Please check the package to ensure all components are present and in good condition:
- Floor Lamp Base with Cord and Switch
- Lamp Shade (Fabric)
- Bulb (Included)
- Assembly Hardware (Fastening Rings)
Image: Overview of lamp components including the base, shade, and dimensions.
4. Setup Instructions
Follow these steps to assemble your Albrillo LED Floor Lamp:
- Unpack Components: Carefully remove all parts from the packaging.
- Prepare the Lamp Base: Locate the lamp base with the power cord.
- Attach the Shade:
- Screw off the white fastening circle from the upper light socket.
- Put the pole into the lamp, ensuring the three connectors are matched.
- Turn the lamp to the upper direction.
- Screw the white fastening circle back onto the upper light socket to secure the shade.
- Install the Bulb: Carefully screw the provided bulb into the E26 screw socket. Ensure it is tightened securely but do not overtighten.
- Position the Lamp: Place the assembled lamp on a stable, flat surface in your desired location.
- Connect to Power: Plug the power cord into a standard 120V electrical outlet.
Image: Visual guide demonstrating the assembly steps, including attaching the shade and securing it.
Video: An official demonstration of the Albrillo floor lamp assembly and operation.
5. Operating Instructions
The Albrillo LED Floor Lamp features a convenient touch control switch.
- Turning On/Off: Locate the touch switch on the power cord. Tap the switch to turn the lamp on or off.
- Brightness Adjustment: If the lamp supports dimming, touch and hold the switch to adjust brightness levels.
Image: The Albrillo floor lamp providing warm illumination in a living room setting.
6. Maintenance
To ensure the longevity and appearance of your lamp:
- Cleaning: Unplug the lamp before cleaning. Use a soft, dry cloth to wipe the lamp base and shade. Do not use abrasive cleaners or solvents.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled down. Unscrew the old bulb and replace it with a new E26 base bulb, not exceeding 40 watts.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Light flickers. |
|
|
8. Specifications
- Model: LL-LD1
- Brand: Albrillo
- Product Dimensions: 5.9"D x 47"W x 5.9"H (approx. 150mm x 1200mm x 150mm)
- Item Weight: 6.16 pounds (approx. 2.8 kg)
- Lamp Type: Floor Lamp
- Shade Material: Fabric (Paper, Polyester)
- Shade Color: White
- Light Source Type: LED
- Wattage: 40 watts (Max)
- Voltage: 120 Volts
- Switch Type: Touch
- Power Source: Corded Electric
- Connectivity Technology: USB
- Included Components: Bulb
- Indoor/Outdoor Usage: Indoor
- Special Feature: Energy-saving, Touch Control
9. Warranty and Support
Albrillo products are designed for reliability and performance. For warranty information, technical support, or customer service inquiries, please refer to the contact details provided on the product packaging or visit the official Albrillo website. Please retain your proof of purchase for warranty claims.